Poseidon 3266 THset – starting guide HW group
www.HW-group.com 600 282
•Click the icon to run UDP Config
program – it will automatically search
for connected devices
In case the device was not connected to
network during UDP Config start-up, you
can easily click the Find Devices button
to repeat the search again.
The Program will search for devices on
your local network. The Poseidon
identifies them according to MAC
address which is printed on label located
on bottom part of each device.
Double click on MAC address will open basic
settings dialog window.
In this moment it is neccesary to setup network parameters.
Notice: In case you do not have following information, contact your
network administrator
•IP address
•HTTP Port
•Mask
•Gateway IP address
•Name of your device - optional
Do not forget to click Apply Changes button to safe new values to
Poseidon memory
Note: to setup IP address you can use as optional:
•Hercules (/Hercules.exe)
•RS-232 serial port (any terminal, DIP1=ON, 9600 8N1)
3) Poseidon configuration – Web browser
3.1) Enter IP address of the device to your web browser address bar or run UDP Config and click
to the IP address.
