Husqvarna 520iRX Manuel utilisateur

520iRX

EN Operator's manual 2-33

Contents

Introduction..................................................................... 2

Safety..............................................................................4

Assembly...................................................................... 20

Operation...................................................................... 22

Maintenance................................................................. 27

Troubleshooting............................................................ 29

Transportation, storage and disposal........................... 30

Technical data.............................................................. 31

Accessories.................................................................. 32

EC Declaration of Conformity....................................... 33

Introduction

Product description

Husqvarna 520iRX is a battery grass trimmer with an

electrical motor.

Work is constantly in progress to increase your safety

and efficiency during operation. Speak to your servicing

dealer for more information.

Intended use

The product can be used with a grass blade or a trimmer

head to cut different types of vegetation. Do not use the

product for other tasks than grass trimming and grass

clearing. Use a grass blade or trimmer head to cut

grass.

Note: National or local regulations may regulate the use.

Comply to given regulations.

Product overview

24 23

31 11 12

1. Trimmer head 2. Cutting attachment guard

2757 - 001 - 24.10.2018

3. Shaft

4. Harness quick release

5. Harness, hip pad

6. Handle adjustment

7. Handlebar

8. Power trigger

9. Power trigger lockout

10. Keypad

11. SavE button

12. Rotation direction button

13. Warning indicator (error LED)

14. Start and stop button

15. Cord

16. Battery charger

17. Power on and warning indicator (error LED)

18. 4 mm hex key

19. Socket wrench

20. Trimmer head

21. Battery release buttons

22. Battery

23. Battery status

24. Battery indicator button

25. Transport guard

26. Hole for locking pin 4 mm hex key

27. Drive disc

28. Blade

29. Support cup

30. Support flange

31. Locknut

32. Operator's manual

33. Loop hanger

Symbols on the product

WARNING! This product can be dangerous!

Careless or incorrect use can result in

serious injury to the operator or others. It is

very important that you read and understand

the contents of the operator's manual.

Please read the operator’s manual carefully

and make sure you understand the

instructions before the product is used.

Use approved eye protection.

Maximum speed of the output shaft.

The product agrees with the applicable EC

directives.

50FT

15 m

50FT

15 m

Keep a minimum distance of 15 m to

persons and animals during operation of the

product.

Use approved protective gloves.

Use heavy-duty slip-resistant boots.

Risk of blade thrust if the cutting equipment

touches an object that it does not

immediately cut. The product can cut off

body parts. Keep a minimum of 15 m

distance to persons and animals during

operation of the product.

Symbols on the product or its packaging

indicate that this product cannot be handled

as domestic waste. This product must be

deposited at an appropriate recycling facility.

The product can cause objects to eject,

which can cause injury.

Use flexible cutting wire as trimmer line. Do

not use metal cutting elements.

The arrows show the limit for the handle

position.

Protected against splashing water.

Direct current.

Noise emission to the environment refer to

the European Community's Directive. The

emission of the product is specified in the

Technical data chapter and on the label.

yyyywwxxxx The rating plate shows the serial

number. yyyy is the production year,

ww is the production week and xxxx

is the sequential number.

757 - 001 - 24.10.2018 3

Symbols on the battery and/or on

the battery charger

Recycle this product at a

recycling station for elec-

trical and electronic equip-

ment. (Applies to Europe

only)

Fail-safe transformer.

Use and keep the battery charger indoors

only.

Double insulation.

Product liability

As referred to in the product liability laws, we are not

liable for damages that our product causes if:

• the product is incorrectly repaired.

• the product is repaired with parts that are not from

the manufacturer or not approved by the

manufacturer.

• the product has an accessory that is not from the

manufacturer or not approved by the manufacturer.

• the product is not repaired at an approved service

center or by an approved authority.

Safety

Safety definitions

Warnings, cautions and notes

are used to point out specially

important parts of the manual.

WARNING: Used if there

is a risk of injury or death

for the operator or

bystanders if the

instructions in the

manual are not obeyed.

CAUTION: Used if there

is a risk of damage to the

product, other materials

or the adjacent area if

the instructions in the

manual are not obeyed.

Note: Used to give more

information that is necessary in

a given situation.

General power tool safety

warnings

WARNING: Read all

safety warnings and all

instructions. Failure to

follow the warnings and

instructions may result in

electric shock, fire and/or

serious injury.

Note: Save all warnings and

instructions for future

reference. The term "power

tool" in the warnings refers to

your mains-operated (corded)

4757 - 001 - 24.10.2018

power tool or battery-operated

(cordless) power tool.

Check before starting

•Always remove the battery to

prevent the product being

started by accident. Always

remove the battery before any

maintenance on the product.

•Before using the product and

after any impact, check for

signs of wear or damage and

repair as necessary.

•Inspect the working area.

Remove all loose objects,

such as stones, broken glass,

nails, steel wire, string etc.

that could be thrown out or

become wrapped around the

cutter or cutter guard.

•Check the motor for dirt and

cracks. Clean off grass and

leaves from the engine using

a brush. Gloves should be

worn when necessary.

•Check that the trimmer head

is completely attached to the

trimmer.

•Check that the product is in

perfect working order. Check

that all nuts and screws are

tight.

•Check that the trimmer head

and trimmer guard are not

damaged or cracked. Replace

the trimmer head or trimmer

guard if the have been

exposed to impact or are

cracked. Always use the

recommended guard for the

cutting attachment you are

using. See chapter on

Technical data.

•The product operator must

ensure that no people or

animals come closer than 15

meters while working. When

several operators are working

in the same area the safety

distance should be at least 15

meters.

•Carry out an overall

inspection of the product

before use. See the

maintenance schedule.

•National or local regulations

may regulate the use. Comply

to given regulations.

Personal safety

•The cutting tool does not stop

immediately after the product

is turned off.

•The product is only designed

for trimming.

•Keep bystanders away.

•Stay alert, watch what you

are doing and use common

sense when operating a

757 - 001 - 24.10.2018 5

power tool. Do not use a

power tool while you are

tired or under the influence

of drugs, alcohol or

medication. A moment of

inattention while operating

power tools may result in

serious personal injury.

•This appliance is not intended

for use by person (including

children) with reduced

physical, sensory or mental

capabilities, or lack of

experience and knowledge,

unless they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

Children should be

supervised to ensure that

they do not play with the

appliance.

•Never allow children or other

persons not trained in the use

of the product and/or the

battery to use or service it.

Local laws may regulate the

age of the user.

•Store the equipment in a

lockable area so that it is out

of reach of children and

unauthorized persons.

•Keep hands and feet away

from the cutting area at all

times and especially when

switching on the motor.

•Dress properly. Do not wear

loose clothing or jewelry.

Keep your hair, clothing

and gloves away from

moving parts. Loose clothes,

jewelry or long hair can be

caught in moving parts.

•Wear personal protective

equipment. See instructions

under the "Personal

protective equipment"

heading.

•Always use face or dust mask

if operation is dusty.

•Turn off the product when it

has to be moved. Always

remove the battery when

passing the machine to

another person.

•Keep in mind that it is you,

the operator that is

responsible for not exposing

people or their property to

accidents or hazards.

•The transport guard must

always be used for storage

and transport.

Power tool use and care

•The only accessories you can

operate with this product are

the cutting attachments we

6757 - 001 - 24.10.2018

recommend in the technical

data chapter.

•Never use a product that has

been modified in any way

from its original specification.

Never use the product near

explosive or flammable

materials.

•Never use a product that is

faulty. Carry out the safety

checks, maintenance and

service instructions described

in this manual. Some

maintenance and service

measures must be carried out

by trained and qualified

specialists. See instructions

under the Maintenance

heading.

•Only use original spare parts.

•Always ensure that ventilation

openings are kept clear of

debris.

•Keep handles dry, clean and

free from oil and grease.

•All covers, guards and

handles must be fitted before

starting.

•Only use the machine in

daylight or in other well-lit

conditions.

•Do not overreach. Keep

proper footing and balance at

all times.

•Don't force the product. It will

do the job better and with less

likelihood of injury at the rate

for which it was designed.

•Working in bad weather is

tiring and often brings added

risk. It is not recommended to

use the product in very bad

weather, for instance, in

dense fog, in heavy rain,

strong winds, intense cold,

risk of lightning.

•If the product starts vibrating

abnormally, stop the product

and remove the battery.

•Avoid Unintentional Starting –

Don’t carry appliance with

finger on switch.

•Store Idle Appliances Indoors

– When not in use, appliances

should be stored indoors

•Walk, never run.

Always use common sense

It is not possible to cover every

conceivable situation you can

face. Always exercise care and

use your common sense. Avoid

all situations which you consider

to be beyond your capability. If

you still feel uncertain about

operating procedures after

reading these instructions, you

should consult an expert before

continuing.

757 - 001 - 24.10.2018 7

WARNING: Never allow

children to use or be in

the vicinity of the

machine. Since the

machine is easy to start,

children may be able to

start it if they are not kept

under full surveillance.

This can mean a risk of

serious personal injury.

Therefore disconnect the

battery when the

machine is not under

close supervision.

General safety instructions

WARNING: Read the

warning instructions that

follow before you use the

product.

•Remove the battery to

prevent the product from

being started by accident.

•This product is a dangerous

tool if you are not careful or if

you use the product

incorrectly. This product can

cause serious injury or death

to the operator or others.

•Do not use the product if it is

changed from its initial

specification. Do not change

a part of the product without

approval from the

manufacturer. Only use parts

that are approved by the

manufacturer. Injury or death

is a possible result of

incorrect maintenance.

•Do a check of the product

before use. See,

Safety

devices on the product on

page 15

and

Maintenance

on page 27

. Do not use a

defective product. Do the

safety checks, maintenance

and service instructions

described in this manual.

•Children should be

supervised to ensure that

they do not play with the

product. Never allow children

or other persons not trained in

the use of the product and/or

the battery to use or service

it. Local laws may regulate

the age of the user.

•Keep the product in a locked

area to prevent access for

children or persons that are

not approved.

•Store the product out of reach

of children.

•Under no circumstances may

the design of the product be

modified without the

permission of the

manufacturer. Always use

8757 - 001 - 24.10.2018

original accessories. Non-

authorized modifications

and/or accessories can result

in serious personal injury or

the death of the operator and

others.

Note: National or Local laws

can regulate the use. Comply to

given regulations.

Safety instructions for assembly

Assembly of blades and

trimmer heads

WARNING: When you

install the cutting

attachment it is very

important that the raised

section on the drive disc/

support flange engages

correctly in the centre

hole of the cutting

attachment. If the cutting

attachment is install

incorrectly it can result in

serious and/or fatal

personal injury.

WARNING: Never use a

cutting attachment

without an approved

guard. See the chapter

on Technical data. If an

incorrect or faulty guard

is fitted this can cause

serious personal injury.

Safety instructions for

operation

WARNING: Read the

warning instructions that

follow before you use the

product.

•If you encounter a situation

where you are uncertain how

to proceed you should ask an

expert. Contact your dealer or

your service workshop. Avoid

all usage which you consider

to be beyond your capability.

•Never use the product if you

are fatigued, while under the

influence of alcohol or drugs,

medication or anything that

could affect your vision,

alertness, coordination or

judgment.

•Faulty cutting attachment can

increase the risk of accidents.

•Do not allow children to use

or be in the vicinity of the

product. Since the product is

757 - 001 - 24.10.2018 9

easy to start, children may be

able to start it if they are not

kept under full surveillance.

This can mean a risk of

serious personal injury.

Disconnect the battery when

the product is not under close

supervision.

•Ensure that no people or

animals come closer than 15

metres while you work. When

several operators are working

in the same area the safety

distance should be at least 15

metres. Otherwise there is a

risk of serious personal injury.

Stop the product immediately

if anyone approaches. Never

swing the product around

without first checking behind

you to make sure that no one

is within the safety zone.

•Ensure that people, animals

or other things can not affect

your control of the product or

that they do not come in

contact with the cutting

attachment or loose objects

that are thrown out by the

cutting attachment. However,

do not use the product unless

you are able to call for help in

the event of an accident.

•Always inspect the working

area. Remove all loose

objects such as stones,

broken glass, nails, steel wire,

string, etc., that could be

thrown out or become

wrapped around the cutting

attachment.

•Make sure that you can move

and stand safely. Check the

area around you for possible

obstacles (roots, rocks,

branches, ditches, etcetera)

in case you have to move

suddenly. Take great care

when you work on sloping

ground.

•Keep a good balance and a

firm foothold at all times. Do

not overreach.

•Deactivate the product before

you move to another area.

•Never put the product down

unless you have deactivated

it and removed the battery.

Do not leave the product

unsupervised when it is

switched on.

•Remove the battery before

you pass the product to

another person.

•Make sure that no clothes or

parts of the body come in

contact with the cutting

attachment when the product

10 757 - 001 - 24.10.2018

Table des matières

Autres manuels Husqvarna Tondeuse

Husqvarna

Husqvarna 128C Manuel utilisateur

Husqvarna

Husqvarna 122HD45 Manuel utilisateur

Husqvarna

Husqvarna 245RX Manuel utilisateur

Husqvarna

Husqvarna 324L X-series Manuel d'instructions

Husqvarna

Husqvarna 324L X-series Manuel utilisateur

Husqvarna

Husqvarna 24C Manuel utilisateur

Husqvarna

Husqvarna 325HE3 X-series Manuel utilisateur

Husqvarna

Husqvarna 536LiHE3 Manuel d'instructions

Husqvarna

Husqvarna 110iL Manuel utilisateur

Husqvarna

Husqvarna 250R Manuel de référence

Husqvarna

Husqvarna 323RII Manuel utilisateur

Husqvarna

Husqvarna 543RB Manuel utilisateur

Husqvarna

Husqvarna 323HD60 Manuel utilisateur

Husqvarna

Husqvarna 143R-II Manuel utilisateur

Husqvarna

Husqvarna 129C Manuel utilisateur

Husqvarna

Husqvarna 225BX-SERIES Manuel utilisateur

Husqvarna

Husqvarna 122c SERIES Manuel utilisateur

Husqvarna

Husqvarna 535RX Manuel utilisateur

Husqvarna

Husqvarna 325RJX-SERIES Manuel utilisateur

Husqvarna

Husqvarna 136 LiHD50 Manuel utilisateur

Husqvarna

Husqvarna 136LiHD45 Manuel utilisateur

Husqvarna

Husqvarna 536LiP4 Manuel utilisateur

Husqvarna

Husqvarna 129R Manuel utilisateur

Husqvarna

Husqvarna 325HS75 X-series Manuel utilisateur

Manuels Tondeuse populaires d'autres marques

MTD

MTD HT 51 E Manuel utilisateur

McCulloch

McCulloch T22 LS Manuel utilisateur

COCKRAFT

COCKRAFT PRO HL36-S Manuel utilisateur

Grizzly

Grizzly CT 1800 Li Manuel utilisateur

Peco

Peco Z Trimmer ZT-3000 Manuel utilisateur

Solo

Solo 116 Manuel utilisateur

Stiga

Stiga ST 1200 Manuel utilisateur

Echo

Echo GT-225 - 10-09 Manuel utilisateur

RedMax

RedMax BT17 Manuel utilisateur

GreenWorks

GreenWorks STA806 Manuel utilisateur

Parkside

Parkside PHSL 900 A3 Manuel utilisateur

Gardeo

Gardeo PRO GPTHT2560 Manuel utilisateur

Park

Park DT-810870 Manuel utilisateur

Worx

Worx WG209 Manuel utilisateur

Gardenline

Gardenline 43671/HTKS26 Manuel utilisateur

Makita

Makita 3710 Manuel utilisateur

Champion

Champion 100683 Manuel utilisateur

Stihl

Stihl FS 311 Manuel utilisateur