Husqvarna AUTOMOWER 310 Manuel utilisateur
EN, English
Operator's manual
HUSQVARNA AUTOMOWER®
310/315/315X
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.
Contents
1 Introduction
1.1 Introduction........................................................... 3
1.2 Product overview Automower® 310/315/315X......4
1.3 Symbols on the product........................................ 5
1.4 Symbols on the display......................................... 5
1.5 Symbols on the battery......................................... 6
1.6 General manual instructions................................. 6
1.7 Menu structure overview - 1..................................7
1.8 Menu structure overview - 2..................................8
1.9 Display.................................................................. 9
1.10 Keypad................................................................ 9
2 Safety
2.1 Safety information............................................... 10
2.2 Safety definitions.................................................11
2.3 Safety instructions for operation..........................11
3 Installation
3.1 Introduction - Installation..................................... 14
3.2 Main components for installation.........................14
3.3 General preparations.......................................... 14
3.4 Before the installation of the wires...................... 14
3.5 Installation of the product.................................... 19
3.6 To put the wire into position with stakes............. 21
3.7 To bury the boundary wire or the guide wire.......21
3.8 To extend the boundary wire or the guide wire... 21
3.9 After the installation of the product......................21
3.10 Product settings................................................ 22
3.11 Automower® Connect app................................ 22
3.12 Product settings with keypad and display......... 23
4 Operation
4.1 Main switch......................................................... 32
4.2 To start the product............................................. 32
4.3 To park the product............................................. 33
4.4 To stop the product............................................. 33
4.5 To switch off the product..................................... 33
4.6 To charge the battery.......................................... 33
4.7 Adjust the cutting height......................................33
5 Maintenance
5.1 Introduction - maintenance..................................35
5.2 Clean the product................................................35
5.3 Replace the blades............................................. 36
5.4 Battery.................................................................36
5.5 Winter service..................................................... 36
6 Troubleshooting
6.1 Introduction - troubleshooting..............................37
6.2 Fault messages...................................................37
6.3 Information messages.........................................41
6.4 Indicator lamp in the charging station................. 42
6.5 Symptoms........................................................... 43
6.6 Find breaks in the loop wire................................ 44
7 Transportation, storage and disposal
7.1 Transportation..................................................... 47
7.2 Storage................................................................47
7.3 Disposal.............................................................. 47
8 Technical data
8.1 Technical data.....................................................48
8.2 Registered trademarks........................................50
9 Warranty
9.1 Warranty terms....................................................51
21440 - 004 - 24.03.2021
1 Introduction
1.1 Introduction
Serial number:
PIN code:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.husqvarna.com.
1.1.1 Support
For support about the product, speak to your Husqvarna
servicing dealer.
1.1.2 Product description
Note: Husqvarna regularly updates the appearance
and function of the products. Refer to
Support on page
3
.
The product is a robotic lawn mower. The product has a
battery power source and cuts the grass automatically. It
continuously alternates between mowing and charging.
The movement pattern is random, which means that the
lawn is mowed evenly and with less wear. The boundary
wire and the guide wire controls the movement of the
product within the work area. Sensors in the product
senses when it is approaching the boundary wire. The
front of the product always passes the boundary wire by
a specific distance before the product turns around.
When the product hits an obstacle or approaches the
boundary wire the product selects a new direction.
The operator selects the operation settings with the keys
on the keypad. The display shows the selected and
possible operation settings, and the operation mode of
the product.
1.1.2.1 Mowing technique
The product is emission free, easy to use and saves
energy. The frequent cutting technique improves the
grass quality and decreases the use of fertilizers.
Collection of grass is not necessary.
1.1.2.2 Find the charging station
The product operates until the battery state of charge is
low. Then it follows the guide wire to the charging
station. The guide wire is laid from the charging station
towards, for instance, a remote part of the work area or
through a narrow passage. The guide wire is connected
with the boundary wire and makes it much easier and
faster for the product to find the charging station.
1.1.2.3 Automower® Connect
Automower® Connect is a mobile application that makes
it possible to select the operation settings remotely.
Refer to
Automower® Connect app on page 22
.
1440 - 004 - 24.03.2021 Introduction - 3
1.2 Product overview Automower® 310/315/315X
Automower® 310/315 Automower® 315X
1
13
14
15
2
34
5
6
10
9
8
12
16
11
1917 18
23
21
20
22
26
27 28
24
29
30 31
32
33
7
25
The numbers in the figure represent:
1. Body
2. Hatch to cutting height adjustment
3. Hatch to display and keypad
4. Stop button
5. Replaceable cover
6. Rear wheels
7. Front wheels
8. Headlights
9. Cutting height adjustment
10. Contact plates
11. LED for operation check of the charging station
and boundary wire
12. Charging station
13. Rating plate (incl. product identification code)
14. Display
15. Keypad
16. Cutting system
17. Chassis box with electronics, battery and motors
18. Handle
19. Main switch
20. Blade disc
21. Skid plate
22. Power supply (the appearance may differ
depending on market)
23. Loop wire for boundary loop and guide wire 1
24. Couplers for loop wire 2
25. Stakes3
1Is a part of the Installation kit.
2Refer to note 1
3Refer to note 1
4 - Introduction 1440 - 004 - 24.03.2021
26. Connector for the loop wire 4
27. Screws for securing the charging station
28. Measurement gauge for help when installing the
boundary wire (the measurement gauge is broken
loose from the box)
29. Operator’s Manual and Quick Guide
30. Cable markers
31. Extra blades
32. Low-voltage cable
33. Alarm decal
1.3 Symbols on the product
These symbols can be found on the product. Study them
carefully.
WARNING: Read the user in-
structions before operating
the product.
WARNING: Disable the prod-
uct before working on or lift-
ing the product.
WARNING: Keep a safe dis-
tance from the product when
operating. Keep your hands
and feet away from the rotat-
ing blades.
WARNING: Do not ride on
the product. Do not put your
hands or feet close to or un-
der the product.
Do not use a high-pressure
washer or even running water
to clean the product.
Use a detachable power sup-
ply as defined on the rating
label next to the symbol.
This product conforms to the applicable
EC Directives.
It is not permitted to dispose this product
as normal household waste. Ensure that
the product is recycled in accordance with
local legal requirements.
The chassis contains components which
are sensitive to electrostatic discharge
(ESD). The chassis must also be resealed
in a professional manner. For these
reasons the chassis shall only be opened
by authorized service technicians. A
broken seal can result in the entire or
parts of the guarantee no longer being
valid.
The low-voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low-
voltage cable. Be careful when trimming
edges where the cables are placed.
1.4 Symbols on the display
In the schedule menu you can set when
the product will cut the lawn.
In the security menu you can select
between 3 security levels for the product.
In the messages menu you can find the
Fault messages
and
Info messages
of the
product.
The Weather timer function automatically
adapts the cutting intervals to the grass
growth.
In the installation menu you can set
manual settings for the installation of the
product.
In the settings menu you can set the
general settings of the product.
In the accessories menu you can set the
settings for the accessories of the product.
4Refer to note 1
1440 - 004 - 24.03.2021 Introduction - 5
The schedule is set for the product to not
cut the grass.
The product overrides the schedule.
The battery indicator shows the charge
level of the battery. When the product
charges the symbol flashes.
The product is in the charging station but
do not charge the battery.
The product is set in ECO-mode.
Bluetooth® wireless communication with
your mobile device.
The GPS-supported navigation is active.
Flashes as it collects GPS information.
Automower® 315X
The GPS-supported navigation is not
active. Automower® 315X
1.5 Symbols on the battery
Read the user instructions.
Do not discard the battery into fire and do
not expose the battery to a heat source.
Do not immerse the battery into water.
1.6 General manual instructions
The following system is used in the Operator’s Manual
to make it easier to use:
• Text written in
italics
is a text that is shown in the
display or is a reference to another section in the
Operator’s Manual.
• Text written in bold is one of the buttons on the
product.
6 - Introduction 1440 - 004 - 24.03.2021
1.7 Menu structure overview - 1
Security
Low Medium High Duration
Duration
of alarm
Duration
of time lock
Change
PIN code
New loop
signal
Security level
Fault
messages
Info
messages
Messages
Use weather timer
Low Medium High
Cutting time
Weather timer *
* Automower®315/315X
Advanced
Schedule
Overview/Monday
Period 1 Period 2 Copy
Su Current
day
All weekSaFrThWeTuMoAll
days
Reset
1440 - 004 - 24.03.2021 Introduction - 7
1.8 Menu structure overview - 2
Installation
Lawn
coverage
Area 1-3
Find charging station
Guide
Delay
time
Test
guide
Reset Test
left
Test
right
Reset
Disable More Disable More
Boundary Charger
Charging
station range
How? How
often?
How
far?
Disable
ResetTest
More Exit
angles
Corridor
width
Reversing
distance
Drive past
wire
Advanced
Information Mower house
Accessories
Settings
ECO mode
Use
Profiles *
Select Rename Save
Profile A,
B or C Time &
date
Set time Set date Time format Date format
Language Country &
Timezone
Reset all
user setting
About
LowLow- High High+Mid
Intensity
Spiral cutting General
Use Use Use
Unit
Format
Delay
time
GPS Auto***
Slope control
Connect@Home** Headlight***
* Automower®315/315X
**Automower®310/315
***Automower®315X
Automower
Connect
8 - Introduction 1440 - 004 - 24.03.2021
1.9 Display
The display on the product shows information and
settings of the product.
To access the display, push the STOP button.
1.10 Keypad
Use the keypad on the product to navigate in the menu.
To access the keypad, push the STOP button.
• Use the START button (A) to start the operation of
the product.
• Use the BACK button (B) to move up in the menu
lists.
• Use the arrow buttons (C) to navigate in the menu.
• Use the OK button (D) to confirm the settings you
select in the menus.
• Use the MENU button (E) to go to the main menu.
• Use the PARK button (F) to send the product to
the charging station.
• Use the number buttons (G) to enter PIN code,
time and date.
A E
F
B D
C
G
1440 - 004 - 24.03.2021 Introduction - 9
2 Safety
2.1 Safety information
2.1.1 IMPORTANT. READ CAREFULLY
BEFORE USE. KEEP FOR FUTURE
REFERENCE
The operator is responsible for accidents or hazards occurring to
other people or property.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities (that
could affect a safe handling of the product), or lack of experience
and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Local regulations
may restrict the age of the operator. Cleaning and maintenance
shall not be made by children without supervision.
Never connect the power supply to an outlet if the plug or cord is
damaged. Worn or damaged cord increase the risk of electric
shock.
Only charge the battery in the included charging station. Incorrect
use may result in electric shock, overheating or leaking of
corrosive liquid from the battery. In the event of leakage of
electrolyte, flush with water/neutralizing agent. Seek medical help if
it comes in contact with the eyes.
Use only original batteries recommended by the manufacturer.
Product safety cannot be guaranteed with other than original
batteries. Do not use non-rechargeable batteries.
10 - Safety 1440 - 004 - 24.03.2021
Autres manuels pour AUTOMOWER 310
16
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Husqvarna Tondeuse à gazon
Husqvarna
Husqvarna AUTOMOWER 310 Manuel utilisateur
Husqvarna
Husqvarna WH3614A Manuel utilisateur
Husqvarna
Husqvarna YTH2148 Manuel utilisateur
Husqvarna
Husqvarna AUTOMOWER 315 MARK II Manuel utilisateur
Husqvarna
Husqvarna R 53SV L Guide de configuration
Husqvarna
Husqvarna LTH2042 Manuel utilisateur
Husqvarna
Husqvarna TS 142L Manuel utilisateur
Husqvarna
Husqvarna 582559701 Manuel de programmation
Husqvarna
Husqvarna LR122 Manuel utilisateur
Husqvarna
Husqvarna Z454X Manuel utilisateur
Husqvarna
Husqvarna PZ29D BF Manuel utilisateur
Husqvarna
Husqvarna GTH2350 Manuel utilisateur
Husqvarna
Husqvarna 966612301 Manuel utilisateur
Husqvarna
Husqvarna 917.384521 Manuel utilisateur
Husqvarna
Husqvarna 315, 320 Manuel utilisateur
Husqvarna
Husqvarna M-ZT 52 Manuel utilisateur
Husqvarna
Husqvarna SG13 Manuel utilisateur
Husqvarna
Husqvarna TS 354X Manuel utilisateur
Husqvarna
Husqvarna 97045900101 Manuel utilisateur
Husqvarna
Husqvarna 917.384506 Manuel utilisateur
Manuels Tondeuse à gazon populaires d'autres marques
RHINO
RHINO 1958 Manuel utilisateur
Wolf Garten
Wolf Garten Compact plus 40 B Manuel utilisateur
Cub Cadet
Cub Cadet LTX 1045 Manuel utilisateur
Craftsman
Craftsman 917.378461 Manuel utilisateur
GGP ITALY SPA
GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur
Challenge
Challenge CH18V2 Instructions de fonctionnement
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuel utilisateur
DEWEZE
DEWEZE ATM-725 Manuel d'utilisation
Weed Eater
Weed Eater 180083 Manuel utilisateur
Better Outdoor Products
Better Outdoor Products Quick Series Manuel utilisateur
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuel d'utilisation
MTD
MTD 795, 792, 791, 790 Manuel utilisateur
