HUSH AVX Manuel utilisateur

HUSH AVX Music Server

User Guide Version 1.0

Legal

Disclaimer

The information set out in this User Manual is correct

as at December 2003 but due to continual

development and enhancements may be changed

without notice.

The information set out in this User Manual (including

without limit information relating to minimum

specifications, user requirements and configuration

settings) are provided for reference and guidance only

and do not amount to any representation, guarantee or

warranty as to the usability, performance or suitability

for you of the DigiFi™ or any part of it.

Infringement Notice

The DigiFi™ must not be used in any manner which

will or is likely to:

— infringe the rights of Digital Fidelity Limited or any

third party including without limit for the

transmission, interception, reproduction, storage or

amalgamation of any unauthorised material;

— breach or contravene any national, international,

local or state laws or regulations or third party

licensing requirements.

Warning Notice

Care should be taken at all times to protect the DigiFi™

and any hardware or component parts included with it

including the Personal Digital Assistant and router

(together the ‘DigiFi™ System’) from adverse

conditions or use which could reduce, impair or

prevent the DigiFi™ from operating properly or at all. In

particular under no circumstances should:

— the DigiFi™ System be exposed to rain, moisture or

extreme cold or heat;

— any cover or case on the DigiFi™ System be

removed or opened other than by a Digital Fidelity

Limited DigiFi™ System trained or approved

technician. Opening any cover or case otherwise

than as set out above will invalidate any warranty or

guarantee (whether express or implied) given by

Digital Fidelity Limited;

— any pre-set ventilation or other holes or access

points be covered, restricted or blocked in anyway

nor should any objects be placed in such ventilation,

holes or access points;

— the DigiFi™ System be dropped and/or

mishandled;

— anything other than a music CD be placed in the

DigiFi™ CD tray for ripping, including but not limited

to DVDs, copyright protected discs or software

discs (other than those provided by Digital Fidelity or

approved partners for the purpose of upgrading

part of the DigiFi™ System).

Intellectual Property Notice

All rights (including but not limited to copyright) and title

in this User Manual including rights relating to or

derived from all documents, files, graphics, code and

links referred to or set out in it are owned by [Digital

Fidelity Limited] or Digital Fidelity Limited is properly

licensed to use the same by applicable owners or

licensors. No part of this User Manual should be

reproduced, transmitted, stored, translated or used (in

whole or part) without the express permission of Digital

Fidelity Limited.

All software and/or facilities incorporated or included in

the DigiFi™ are owned by Digital Fidelity Limited or

Digital Fidelity Limited is properly licensed to use the

same. Under no circumstances should any part of the

software and/or facilities be reproduced, transmitted,

stored, translated or used without the express written

permission of Digital Fidelity Limited.

Supply of the DigiFi™ and any software and/or

facilities incorporated in it does not convey a license

nor imply any right to distribute content created with

the DigiFi™ in revenue-generating broadcast systems

(terrestrial, satellite, cable and/or other distribution

channels), streaming applications (via Internet,

intranets and/or other networks), other content

distribution systems (pay-audio or audio-on-demand

applications and the like) or on physical media

(compact discs, digital versatile discs, semiconductor

chips, hard drives, memory cards and the like). An

independent license for such use is required. For

details, please visit http://mp3licensing.com.

Supply of the DigiFi™ and any software and/or

facilities incorporated is subject to any agreement or

license attached or included with it.

rights reserved.

Trademark Notice

Digital Fidelity and DigiFi™ are unregistered

trademarks of Digital Fidelity Limited. All other

trademarks (whether registered or not) are owned by

third parties who have licensed Digital Fidelity to use

the same. Under no circumstances should any

trademark (whether registered or unregistered) used or

referred to in this User Manual be used, modified or

reproduced in anyway without the consent of Digital

Fidelity Limited or the rights owner of such trademark

(if different).

Specific Third Party Rights

MPEG Layer-3 audio coding technology used or

incorporated in the DigiFi™ is provided under license

from Fraunhofer IIS and Thomson.

Hush™ AVX Music Server

User Guide

Introducing the HUSH™ AVX Music Server.

The HUSH™ AVX Music Server stores up to 1600 CDs

and plays them through your existing Hi Fi system.

The Server is controlled using the DigiFi™ interface,

which is hosted on a handheld PDA.

The PDA is connected to the Server by wireless LAN.

The DigiFi™ interface makes it easy and intuitive to

select and play albums or tracks, and to create, edit

and listen to playlists.

Encoding formats currently supported are WAV, WMA

and MP3.

How to use this User Guide

The AVX has been designed by music lovers for music

lovers.

HUSH™ Technologies ask that, in order to get the best

out of the AVX Music Server and the DigiFi™ software

interface, you carefully read this User Guide.

This User Guide is divided into three sections.

Section 1 is the ‘How To’ guide. It explains in step-by-

step detail how to complete the fundamental operations

on the DigiFi™ Interface.

Section 2 is the ‘Reference’ Guide. It provides

reference information for more advanced operation.

Section 3 is the ‘Troubleshooting’ section. It provides

the answers for the most common technical issues.

—

Introduction

Hush™ AVX Music Server

User Guide

Contents 1. How To

1.1 Use the Interface

1.2 Hardware Buttons

1.3 General Controls

1.4 Rip CDs

1.5 Change Formats

1.6 Play an Album

1.7 Select a Song

1.8 Queue the Tracklist

1.9 Save the Tracklist

1.10 Clear Now Playing Tracklist

1.11 Create a Playlist

1.12 Edit Existing Playlist

1.13 Create Random Playlist

1.14 Search for Album or Track

2. Reference Guide

2.1 Switching On and Off

2.2 Now Playing

2.3 Music Library

2.4 Ripping and Encoding

2.5 Clear Now Playing Tracklist

2.6 Save Now Playing Tracklist

2.7 Create Random Playlist

2.8 Create New Playlist

2.9 Edit Existing Playlist

2.10 Assign Playlist to Genre

2.11 Search for Album or Track

2.12 Advanced Menu

2.13 Maintain Music Library

2.14 CD Database Lookup

2.15 Maintain Genres

2.16 CD Database Genre

2.17 Rooms

2.18 Linked Rooms

2.19 Status & Messages

2.20 System Settings and Functions

2.21 Use of PDA Buttons

2.22 Alerts

2.23 Scheduled Tasks

2.24 Upgrading

2.25 PDA Backup or Restore

3. Troubleshooting

3.1 My Server will not Power On

3.2 My PDA will not Power On

3.3 The Interface Starts on the PDA

but doesn’t Connect to the Server

3.4 My Server will not Power Off

3.5 No Music Comes from my Hi-Fi

3.6 The Quality of the Music from my

Server is not Good Enough

3.7 The Interface Starts on the PDA

but Periodically Disconnects

3.8 I am Having Problems Ripping CDs

3.9 CDs Rip but Tracks are Missing or

Gaps Appear in the Music

3.10 Artist, Album and Track Details

are not Appearing for Newly

Ripped CDs

3.11 Album Covers are not Appearing

1. How To

1.1 Use the Interface

The DigiFi™ interface is based on a simple tab system.

It’s easy to use and intuitive to learn.

Just tap on a tab or button navigate.

There are 4 screens you’re likely to use the most:

— Music Library — Albums

— Music Library — Tracks

— Now Playing — Tracklist

— Now Playing — Currently Playing

The Music Library — Albums

Where you’ll find your music collection displayed.

Music Library — Details

Lets you see all the tracks on your album or playlist.

Now Playing — Tracklist

Shows you the current tracks being played and

queued.

Now Playing — Current Track

Shows you the current track being played.

For normal listening, it is a simple matter of ‘toggling’

between the Music Library and Now Playing screens

to play albums — and using the Tracks screen to select

separate tracks.

DigiFi™

The DigiFi™ Hush AVX Music server is powered by

Digital Fidelity Limited’s DigiFi™ software system.

1. How To

Hush™ AVX Music Server

User Guide

Music Library —

Albums

Music Library —

Tracks

Now Playing —

Tracklist

Now Playing —

Current Track

1.2 Hardware Buttons

Button 1

Switch the DigiFi™ Interface on and off.

Button 2

Takes you to the Now Playing screen. Once there, it

lets you toggle between Tracklist and Current Track

views.

Button 3

Takes you to the Music Library. Once there, it lets you

step through A-Z, Genre, Playlist and Other views.

Button 4

Takes you to Ripping and Encoding. Once there, it lets

you toggle between Now Ripping and Now Encoding

views.

Central button

Up/Down changes volume.

Left/Right changes track.

Stylus

Use the stylus to tap your selections.

1. How To

Hush™ AVX Music Server

User Guide

12 34

Stylus

Hardware

Buttons

Central button

1. How To

1.4 Rip CDs

Just place a CD in the tray and close.

The AVX will do the rest.

You can tell it’s ripping by the flickering blue light.

After a short time the CD tray will pop out.

You’ll notice that the Refresh button on the Now

Playing screen has turned red.

You can tap this button and the track information

will be automatically updated.

Or you can place another CD in the tray and go on

ripping.

Just tap Refresh at the end of your session for an

automatic bulk update.

1.3 General Controls

The backspace symbol can take you back to the

previous screen.

Volume can be adjusted by tapping this icon and

moving the slider.

To pause the current track, tap the pause icon.

To select the repeat function, tap the repeat icon.

To select the shuffle icon, tap the shuffle icon.

Hush™ AVX Music Server

User Guide

Currently

playing track

Toggle

between Now

Playing and

Music Library

tabs

Volume is

adjusted by

tapping the

volume icon

Repeat and

shuffle icons

Backspace

symbol can

take you back

to previous

screen

General

controls to

pause, replay

or skip tracks

Toggle

between

Tracklist and

Current Track

screens

Activity

indicator

The progress

bar will indicate

the progress of

Refreshing

If the refresh

button turns

red, there are

new CDs to

be added to

the library.

Tap on the

button to start

the Refresh

process

1. How To

Tap the Settings button.

From within Settings screen, tap on High Quality tab.

The default is WMA (compressed).

To change to either WAV (uncompressed) or MP3

(compressed) simply tap on the drop-down menu

marked Format, then highlight the format you want.

Tap Ripping Monitor to view current ripping progress.

Alternatively, tap the Now Playing or Music Library

tabs.

For more details on frequency and bit rate please refer

to Reference Section, 2.4.7.

1.5 Change Formats

CDs can be ripped in one of three formats:

WAV (uncompressed);

WMA (compressed);

MP3 (compressed).

WAV will provide the highest quality fidelity, though will

use approximately 10 times the storage space of WMA.

To change format, tap the Ripping and Encoding tab

on the Menu.

Hush™ AVX Music Server

User Guide

Tap the Ripping

and Encoding

option on the

Tap the

Settings button

From within

Settings

screen, tap on

High Quality

tab

Select the

format

1. How To

1.7 Select a Song

Go to Music Library.

Select an album.

Select Tracks.

Highlight a track.

To play the track, tap Play Track. The track will play and

the Now Playing screen will appear.

Alternatively, you can tap Add Track. This adds the

track to the Now Playing queue.

You can change tracks in two ways:

Either tap once on the one you want to listen to.

Or tap the forward or back buttons.

Method 1:

1.6 Play an Album

Most people start by using the A-Z function on the

Music Library screen.

Tap All and the list of all artists ripped will appear.

Alternatively, you can tap a letter to quickly locate a

particular album or artist.

To select an album, highlight it.

Then tap Play Album.

The DigiFi™ will automatically play the album and the

Now Playing screen will appear.

This shows the album and artist details, the track

length, and the tracks now in the queue.

You can either add albums or individual tracks to this

queue (Add Album, Add Track), and you can change

tracks on this screen.

Hush™ AVX Music Server

User Guide

Tap on an

album to select

Then tap on the

Play Selected

button

Currently

playing Tracklist

This shows the

album and

artist details,

and the track

length

Tap here to

return to the

Music Library

from where you

can add

albums or

individual

tracks to the

Tracklist

Then tap the

Tracks button

Tap on an

album to select

Tap on a track

to select

Tapping Add

Track adds the

track to the

Now Playing

Tracklist

To play the

track, tap Play

Track. The

track will play

and the Now

Playing screen

will appear

Autres manuels pour AVX

Table des matières

Autres manuels HUSH Serveur

HUSH

HUSH AVX Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur