Hunter 90646 Manuel utilisateur

Tripod Fan

ripod FanTripod Fan

Owner’s Manual

English

Model

61811-01

R20220120

90646

dddd

Owne

’

TABLE OF CONTENTS

Introduction ............................................................. 3

Safety and Warnings................................................ 3

Fused Plug............................................................... 6

Grounding............................................................... 5

Unpacking............................................................... 7

Fan Assembly........................................................... 7

Operation................................................................

Off / Speed Selection

Fan Tilt Adjustment

Maintenance............................................................

Technical Support.....................................................10

Troubleshooting .......................................................10

Warranty.................................................................10

61811-01 R20220120

INTRODUCTION

Thank you for choosing the Hunter Tripod Fan. This

manual gives you complete instructions for assembling

and using your fan. Here are some of the features you

will enjoy with your fan:

An attractive design that enhances any decor

Three speeds to adjust your comfort level

All metal construction

SAFETY AND WARNINGS

READ AND SAVE THESE INSTRUCTIONS! To reduce

When using electrical appliances, basic precautions

should always be taken to reduce the risk electric

shock and personal injury:

Read all instructions before using this fan.

1. Improper installation may result in the risk of

electric shock or personal injury.

2. To prevent the risk of and electric shock, DO

NOT use the unit near windows. Rain and moisture

may create an electrical hazard.

3. The power plug must be removed from the power

socket when not in use, before cleaning, servicing,

maintenance and before moving to another location.

4. DO NOT put fan in a damp place or where humidity

is high, such as a bathroom.

5. The fan should be placed on a stable surface to

avoid falling.

6. Use fan only for intended use, as described in this

instruction manual.

7. To protect against electrical shock, DO NOT immerse

any part of the unit in water or spray with liquids.

with any solid-state speed control device.

8. Close supervision is necessary when any appliance

is used near children.

61811-01 R20220120

9. NEVER insert pencils or any other objects

through the grill when the fan is running.

10. DO NOT operate any appliance with a damaged

cord or plug, after the appliance malfunctions or has

been dropped or damaged in any manner. Discard

fan or return to an authorized service facility for

examination and/or repair.

11. To disconnect, grip plug and pull from wall outlet.

NEVER yank on cord.

12. ALWAYS use on a dry surface.

13. This product is intended for household use only and

not for commercial or industrial use.

14. DO NOT operate fan in the presence of explosive

15. DO NOT place fan or any parts near an open

cooking or any other heating appliances.

16. DO NOT use near curtains, plants, window

treatments, etc.

17.

2. Children should be supervised to ensure they do not

play with the appliance.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory, or

intellectual disabilities, and persons with lack of

experience, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

WARNING

This appliance has a grounded three-prong plug and

is suitable for grounded receptacle use only. An

adapter can be purchased separately for connecting

three-blade grounding-type plugs to two-slot

receptacles. The adapter must be properly grounded.

DO NOT attempt to defeat the purpose of this safely

feature.

18. Do not run cord under carpeting. Do not cover cord

with throw rugs, runners, or similar coverings. Do

not route cord under furniture or appliances.

will not be tripped over.

61811-01 R20220120

Figure 1

Fi 1

This appliance is for household use only and may be

plugged into any 120-volt AC electrical outlet (ordinary

household current). DO NOT use any other type of outlet.

This unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in

Figure 1, and must be used with an electrical outlet that

can accommodate the grounding pin. If your electrical

must purchase an adapter as shown in Figure 2.

NOTE: The adapters ARE NOT supplied with this fan.

Read, follow, and save the instructions that are included

with the adapter you choose. The green grounding lug

extending from the adapter must be connected to a

permanent ground such as a property grounded outlet

accommodate the grounding pin.

LINE CORD SAFETY TIPS

1. NEVER pull or yank on the cord or the appliance.

3. To disconnect the appliance, grasp the plug and

remove it from the outlet.

4. Before each use, inspect the line cord for cuts and/

or abrasion marks. If any are found, the appliance

should be serviced and the line cord replaced. Please

return it to our Service Department or to an authorized

service representative.

5. NEVER wrap the cord tightly around the

appliance, as this could place undue stress on the

cord where it enters the appliance and could cause

it to fray and break.

6. DO NOT operate this appliance if the line cord shows

any damage, if the appliance works intermittently or

stops working entirely.

Grounded

Plug

Grounding Pin Grounded Outlet

Box Cover

WARNING

Figure 2

Grounded Outlet

Box Cover

Metal

Screw

Adapter

Grounding

Means

GROUNDING

outlet cannot accommodate the grounding pin, then you

box. Do not use an adapter if your electrical outlet can

61811-01 R20220120

Figure 3

Fi 3

This product employs overload protection (fuse). A blown

fuse indicates an overload or short-circuit situation. If the

fuse blows, unplug the product from the outlet. Discard

product if the attachment plug is damaged. To reduce the

remove, replace, repair or tamper with the originally

supplied plug. If the fan does not function properly, it may

be due to the safety device incorporated in this plug.

If the fuse fails, it is generally due to a short circuit or

circuit overload. Replace the fuse as per the instructions

below (follow product marking for proper fuse rating)

and check the product. If the replacement fuse

fails, a short-circuit may be present and

immediately unplug the unit and contact our

technical support department for assistance.

Fuse Replacement:

Grasp plug and remove from the receptacle or other

outlet device. Do not unplug by pulling on cord.

Locate the door on top of the plug. Figure 3.

2. Slide the door on top of the plug towards the blades.

Figure 4.

3. Carefully remove the fuse from the clips holding it on

with 5 Amp, 125 Volt fuse. Figure 5.

Warning! Electrical Hazard! Only replace with a

fuse type and rating matching what was removed from

a safety device (fuse) that should not be removed.

Discard product if the attachment plug is damaged.

the product. If the product fails a second time,

immediately unplug it and contact our technical support

at 1-888-880-3267.

4. Gently push the fuse back into the pins that will hold

it in place.

Note: If the fuse is not seated properly, the unit will not

function.

6. Plug the fan back in and resume use.

FUSED PLUG

Figure 4

Figure 5

Fi 5

Slide the door back over the fuse box in the plug.

61811-01 R20220120

the top and bottom. RISK OF FIRE. Replace fuse only

RISK OF FIRE. Do not replace attachment plug. Contains

FAN ASSEMBLY

Figure 8

Figure 9

UNPACKING

As you unpack the fan, save the carton and packing

Follow the steps below to attach the fan head to the tripod.

materials in case you want to move or ship the unit in the

future. Carefully remove all items from the box.

NOTE: It is best to have someone hold the box while

you lift the fan and the protective packaging out of the

carton. Make sure all shipping materials are removed

from fan before operating.

NOTE: It is

est to

ave someone

ox w

you lift the fan and the protective packaging out of the

carton. Make sure all shipping materials are removed

rom

an be

ore operating.

Figure 7

Fully extend the pre-install tripod legs, align the holes

of the tripod bracket and the legs, install with three

position. (Figure 6)

2. Press the clip buttons in completely while sliding the

pole from the bottom pole assembly into the

pre-install tripod poles until the clip buttons appear

through the hole in the pre-install tripod poles. Place

4. Place the bolt cover from hardware bag onto the top

of the tripod bracket. (Figure 9)

3. Turn the fan head perpendicular to the fan head

slot of the tripod adapter, making sure the hole on

the fan head bracket align with the hole on the

tripod adapter. Take the bolt and nut from the

hardware bag, insert the bolt through the aligned

holes and tighten with the nut to secure the fan head

in position from the bottom of the tripod. (Figure 8)

61811-01 R20220120

Fan Head

Bracket

Fan Head

Nut

Bolt

Figure 6

Bolt Cover

Figure 11

OPERATION

Turn the fan “ON” or “OFF” by rotating the power/speed

knob at the back of the fan head. The power should

always be OFF before unplugging the fan. To select the

speed, turn speed control from OFF to the desired speed

setting: 0 (off), 1 (low), 2 (medium), 3 (high). (Figure 10)

Oﬀ / Speed Selection

Fan Tilt Adjustment

tilt the fan head manually to the desired angle.

(Figure 11)

61811-01 R202201208

Figure 10

MAINTENANCE

This fan is permanently lubricated and will not require

additional lubrication (oil) for the life of the fan.

This fan requires little maintenance and contains no user

serviceable parts. DO NOT try to x it yourself. Contact

qualied service personnel if servicing is needed.

outlet. Wipe off excess dust with a lint-free cloth. To ensure

adequate air circulation to the motor, keep vents located

at the rear of the motor free from dust accumulation. A

vacuum cleaner hose can be used to clean these vents.

DO NOT immerse the fan in water or any other liquid.

CLEANING THE FAN:

1. Turn the fan off and unplug from the electrical outlet.

Use a dry or slightly damp lint-free cloth to clean

Use a soft, slightly damp cloth to wipe the remaining

fan parts.

DO NOT allow water or any other liquid to get into

the motor housing or base.

DO NOT plug the fan into an electrical outlet until it

has been fully reassembled.

the fan.

Before cleaning, turn the fan off and unplug from electrical

61811-01 R202201209

TROUBLESHOOTING

1. Problem

Cannot adjust the angle of the fan.

Solution

Loosen the screws on the side of the fan head bracket.

Adjust to the desired angle and tighten the screws.

WARRANTY

Hunter Home Comfort makes the following limited

warranty to the user or consumer purchaser of this Hunter

Portable Fan:

If any part of your Hunter Portable Fan other than the

motor fails at any time within one year after the date of

TECHNICAL SUPPORT

If you need any assistance with setup, operation, or parts

for your new Hunter Portable Fan, please call us. Our

technical support staff is ready to help! We are open

24 hours, 7 days a week.

You may also reach us online at

www.HunterHomeComfort.com.

An electronic copy of this user manual can also be

obtained online at www.HunterHomeComfort.com.

USA: 1-888-880-3267 (FANS)

[email protected]

10 61811-01 R20220120

If your Hunter Portable Fan motor fails at any time within

one year after the date of sale due to a defect in material

or workmanship, labor to repair the defect will be

provided free of charge at our Service Department in

Kennesaw, Georgia. You will be responsible for labor

costs after this one-year period. The foregoing limited

warranty applies only to the motor itself, and does not

apply to electronic controls such as remote controls,

remote control receivers or transmitters used in conjunction

with the motor. These electronic control items are included

in the one year limited warranty below.

Table des matières

Autres manuels Hunter Ventilateur

Hunter

Hunter TYPE E Series Manuel utilisateur

Hunter

Hunter 25903 Manuel

Hunter

Hunter 28671 Manuel utilisateur

Hunter

Hunter M3544-01 Manuel utilisateur

Hunter

Hunter 52594 Manuel utilisateur

Hunter

Hunter Deermont PG3869 Manuel utilisateur

Hunter

Hunter 20171 Manuel

Hunter

Hunter 23277 Manuel utilisateur

Hunter

Hunter Hunter Ceiling fans Manuel utilisateur

Hunter

Hunter 42660-01 Manuel utilisateur

Hunter

Hunter Sontera Manuel d'instructions

Hunter

Hunter Indoor Ceiling Fan Manuel utilisateur

Hunter

Hunter The French Quarter Manuel utilisateur

Hunter

Hunter Mt. Vista Manuel utilisateur

Hunter

Hunter 21705 Manuel

Hunter

Hunter Hunter Ceiling Fan Manuel utilisateur

Hunter

Hunter Hartland Manuel utilisateur

Hunter

Hunter 22459 Manuel

Hunter

Hunter Hunter Ceiling Fan Manuel utilisateur

Hunter

Hunter 22388 Manuel utilisateur

Hunter

Hunter FSQQ Manuel utilisateur

Hunter

Hunter The Villa Manuel utilisateur

Hunter

Hunter 28676 Mode d’emploi

Hunter

Hunter 28425 Manuel

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage

Litex Industries

Litex Industries E-CGL52CB5C1 Manuel utilisateur

Lindab

Lindab LTDF Manuel utilisateur