6 English
Initial Visit - Manual EntryInitial Visit - Manual Entry
During the first visit of a vehicle, the vehicle indentification
information must be entered manually. After the initial visit, the
SmartPlate technology will automatically recal the vehicle identity
and alignment specifications.
SmartPlate requires an active HunterNet®account.
Manual Entry Process:
1. Drive vehicle through Quick Check Drive™ following
the General Process directives.
2. Access HunterNet online.
3. In HunterNet, go to the “Alignment ShopResults”
page.
4. Locate the vehicle that has just drove through the
QCD, with the following two options:
A) In the “Customer Result” screen, select the
inspection time for the specific vehicle.
B) In the “Quick View” screen, select the image of the
vehicle.
5. Click on the “Edit Text” to enter the vehicle
information.
6. Enter all vehicle identification information.
7. The results of the alignment inspection will be
displayed and memorised.
For all future visits, the standard, built-in cameras will capture
the vehicle’s license plate as it enters or exits the Quick Check
Drive unit’s field of vision and will automatically recal the vehicle
identification and specifications.Within seconds, total toe and
camber for each wheel are measured and presented agains Original
Equipment Manufacturer specifications.
EnvironmentalEnvironmental
InformationInformation
The following disposal procedure shall be exclusively applied to the
machines having the crossed-out bin symbol on their data plate.
Figure 7.
This product may contain substances that can be hazardous to the
environment and to human health if it is not disposed of properly.
The following information is therefore provided to prevent the release
of these substances and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of
in the usual municipal waste but must be separately collected for
their proper treatment. The crossed-out bin symbol, placed on the
product and on this page, reminds the user that the product must be
disposed of properly at the end of its life.
In this way it is possible to prevent that a non specific treatment of
the substances contained in these products, or their improper use,
or improper use of their parts may be hazardous to the environment
or to human health. Furthermore, this helps to recover, recycle and
reuse many of the materials contained in these products.
Electrical and electronic manufacturers and distributors set up
proper collection and treatment systems for these products for this
purpose.
At the end of the product’s working life, contact your supplier for
information about disposal procedures. When you purchase this
product, your supplier will also inform you that you may return
another worn-out appliance to him free of charge, provided it is of
the same type and has provided the same functions as the product
just purchased.
Any disposal of the product performed in a different way from that
described above will be liable to the penalties provided for by the
national regulations in force in the country where the product is
disposed of.
Further measures for environmental protection are recommended:
recycling of the internal and external packaging of the product and
proper disposal of used batteries (only if contained in the product).
Your help is crucial in reducing the amount of natural resources used
for manufacturing electrical and electronic equipment, minimise the
use of landfills for product disposal and improve the quality of life,
preventing potentially hazardous substances from being released in
the environment
