Hummer H2 Manuel utilisateur
Multifunctional Power Bank
H2
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
English
3 –11
Čeština
12 –20
Slovenčina
21 –29
Magyar
30 –38
Deutsch
39 –47
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
PRODUCT LAYOUT:
PARTS LIST:
#
Parts Name
Qty
#
Parts Name
Qty
1
Hummmer -H2
Multifunctional Power Bank
1
5
AC Adapter
1
2
Sparkless Smart Cable
1
6
Zipper Bag
1
3
Micro USB cable
1
7
User Guide
1
4
Car Charger
1
8
12V output cigarette lighter
adapter1
1
Power Button
Battery Indicator Light
LED ON/OFF Button
12V output cigarette lighter adapter
12V/10A
Output Port
14V/1A Input Port
LED Light
USB 5V/1.1A
Output Port
sssssssssssss
sssssssssssss
sssssssssssss
USB 5V/2.1A
Output Port
sssssssssssss
sssssssssssss
sssssssssssss
12V Jump Starter Socket
Micro USB cable
Sparkless Smart Cable
BATTERY CAPACITY INDICATOR LIGHTS:
Press the Power Button lightly to check the remaining battery level.
Indicator
lights
Unlit 1
Flashing
1 solid
2 solid
3 solid
4 solid
Battery
level
0%
10%
25%
50%
75%
100%
SPECIFICATIONS
Battery Capacity:
12000mAh (44.4Wh)
Jump Start Current:
12V/300A~600A
USB Output:
5V 2.1A; 5V 1.1A
Output:
12 10A
Input:
14V 1A
Operating Temperature:
-20°C to 60°C
Size:
7.2 x 3.3 x 1.2 inches
Weight:
1.0lbs
For 12V Vehicles:
Recommended Vehicle Engine Displacements for Jump Starting:
For Engines Up To 6.0L Gasoline and 4.0 Diesel
CHARGING THE H2:
Connect H2 using the included AC adapter or using the supplied car charger and charge
from the socket of the cigarette lighter. The charging time of H2 will differ based on the
power source used.
JUMP STARTING A VEHICLE:
Before jump starting the vehicle, ensure that the battery level of the H2 is sufficient for
jump starting (i.e over TWO lights).
JUMP STARTING STEPS:
1. Ensure that the battery level of the jump starter is sufficient for jump starting (i.e. over
TWO lights).
2. Plug the Sparkless Smart Cable into the jump
3. Connect Red clamp to the positive (+) battery terminal first, then connect Black
clamp to the negative (-) battery terminal.
4. Before jump starting, check the jump start indicator beside the BOOST button.
a. If the green indicator light is on, means ready to jump start.
b. If the red indicator light is on, means a misconnection between the clamp and battery
terminal.
c. If the red indicator light is blinking, means Reverse Charge protection is activated or
Low Battery.
d. If no light is on, press the BOOST button for 3 seconds until the green indicator light
turns on, by which time the jump starter is ready for use.
R: red clamp
B: black clamp
Green
Red
5. Once the vehicle has been successfully jump started, disconnect the jumper cable
clamps from the vehicle battery terminals.
JUMP STARTING WARNINGS!
•DON'T connect the RED and the BLACK clamps to each other or connect the two
clamps to any metal to prevent physical injury or damage to the vehicle.
•DON'T use the jumper cable for any purpose other than jump starting a vehicle.
•Always check to see if the jumper cable clamps are properly connected. DON'T
attempt to jump start after THREE attempts to prevent damage to the main unit.
Check your vehicle to see if it has any problems.
•DON’T crank the engine continuously for more than 5 seconds each time.
•Stay clear of the vehicle battery while jump starting.
•Use this product in a ventilated area. Wear safety glasses or goggles to protect
your eyes.
•Turn off the ignition before connecting the jumper cable clamps to the vehicle
battery.
•Never connect to the fuel line, fuel injector or carburetor as the engine ground.
•Keep away from children to prevent accident.
CHARGING USB DEVICES (e.g. SMARTPHONES):
CHARGING USB DEVICES (e.g. SMARTPHONES):
1. Make sure the USB device is 5V powered.
2. Connect the included USB Charge Cable to the USB output port of the H2 and connect
to the USB device for charging. (If the included cable is not suitable for your device, you
can select your own appropriate USB Charge Cable).
3. The USB port will accept standard USB Charge Cable included with your USB device.
4. Press the Power button to start charging the USB device.
5. The number of times you can recharge a USB device will vary between devices.
R: red clamp
B: black clamp
TURNING ON/OFF THE LED LIGHT:
Press the LED ON/OFF Button and hold for 3 seconds to turn on the LED light. Press
again for Strobe, again for SOS light mode and again to turn the LED light off.
POWERING UP 12V ELECTRONIC DEVICES:
1. Plug the 12V output cigarette lighter adapter into the 12V/10A output port.
2. Insert the cigarette lighter connector from the 12V electronic devices into the adapter.
3. H2 will automatically power up the connected electronic devices.
Cautions: This adapter cable is just a connector adapter, and it does not
have any electronic circuits inside to control electronic voltage/current/polarity.
It only provides physical size and shape conversion.
Please make sure the power source voltage /current/polarity are all correct for
your applications when using this adapter.
FAQ:
Q1: What are the features of the H2?
A1: Apart from jump starter function, the H2 can be used to recharge virtually any 5V
powered USB devices, such as mobile smartphones, tablets, portable gaming system,
digital cameras, camcorders, and portable GPS devices, etc.
Besides, it can power up any 12V electronic devices, such as vacuum cleaner, car waxer,
air compressor, and portable freezer, etc. by using the 12V output cigarette lighter
adapter. It can also jump start a drained car battery with the included Sparkless Smart
Cable. It is also equipped with a built-in ultra-bright LED flashlight.
Q2: How does the Sparkless Smart Cable work?
A2: If the green indicator light is on, means ready to jump start; If the red indicator light
is on, means a misconnection between the clamp and the battery terminal; If no light is
on, press the BOOST button for 3 seconds until the green indicator light turns on, by
which time the jump starter is ready for use. If the red indicator light is blinking, means
the Reverse Charge protection is activated or Low Battery.
Q3: Will reversing polarity connections of the jump start cable damage the vehicle?
A3: Not at all, the H2 is very safe with Sparkless Smart Cable. If you accidentally connect
the RED and BLACK cable clamps to the wrong polarity terminal and attempt to jump
start the vehicle, the Sparkless Smart Cable (the red indicator light is on) will cut the
power immediately to prevent injury and avoid damaging the vehicle.
Q4: What if it doesn’t jump start the vehicle?
A4: If the H2 fails to jump start the engine, please wait at least 10 seconds before
attempting to try again and please do not crank the engine continuously for more than 5
seconds each time. If still not succeed after 3 attempts, it may be due to other problems
of the vehicle. Do not try to crank the engine continuously for more than 10 times in a
row. It is also highly recommended to replace the vehicle battery once every 2-3 years.
Q5: How many times can the H2 jump start a vehicle?
A5: Approximately 15 times with a 100% fully charged battery.
Actual results may vary due to battery conditions.
Q6: How long is the H2 standby time?
A6: The standby time of H2 is up to 9 months if it is fully charged. It is recommended to
fully discharge the battery via USB output port and recharge to full every 3 months to
prolong its battery life. Result may vary depending on the owner usage and the battery
conditions.
Q7: How long will it take to fully recharge the H2 to the maximum battery level?
A7: It takes about 4.5 hours through the 14V/1A input port. Actual results may vary due
to battery conditions.
Q8: How long will it take to fully recharge a smartphone or USB devices?
A8: The number of times you can recharge a smartphone will vary between different
smartphones and devices. For recharge times, contact your device manufacturer.
TROUBLE SHOOTING:
Finding
Cause
Remedies
The indicator light on
the Sparkless Smart
Cables controller is off
after connecting to the
vehicle battery.
The vehicle battery is
either at ZERO
voltage or is not
connected with a
battery.
Hold the BOOST button on
the controller for 3
seconds until the Green
light is on and it's ready to
jump start.
There is no response
when pressing the
Power button on the H2.
The low voltage
protection is activated and
the electronic circuit has
been shut off.
Plug the charging adapter
into the charging port to
activate the electronic
circuit.
The engine keeps cranking
but eventually could not
start.
May be due to other
issue of the vehicle, not
the battery.
Please stop jump starting
the vehicle and seek for
professional technicians to
identify the problem.
PROTECTION:
•Short Circuit Protection
•Reverse Charge Protection
•Over Discharge Protection
•Reverse Polarity Protection
•Over Voltage Protection
•Overheat Protection
Table des matières
Langues :
Autres manuels Hummer Accessoires
