Humanware explore 5 Manuel utilisateur
QUICK START GUIDE
1. Connect the USB recharge cable to the
Power Supply.
2. Hold explorē 5 so that the screen side is
facing you. Make sure the tactile USB
symbol on the recharge cable’s USB
connector is on the opposite side of the
screen. Carefully connect the cable to the
recharge port located on the left side of your
device and plug the power supply into an
outlet.
IMPORTANT: Use caution while inserting
the cable into the Recharge Port.
3. Let your device recharge until your battery is
full. The device will become warmer during
the charge –this is normal.
4. Once the device is fully charged, carefully
disconnect the power cable.
5. Press the Power button to start using the
device.
CONTENTS
Chapter 1 –Product Overview....................... 1
Introduction................................................. 1
Box Contents.............................................. 4
Physical Description ................................... 5
Chapter 2 –Using your explorē 5 .................. 8
Powering off explorē 5 .......................... 11
Magnifier Mode......................................... 11
Zooming in and out ............................... 12
Changing Contrast................................ 13
Line and blinds...................................... 15
Autofocus.............................................. 16
Freezing an image ................................ 18
Zooming in and out of frozen images.... 19
Gallery Mode ............................................ 20
Capturing and saving images to
Gallery................................................... 20
Accessing and viewing images in
Gallery................................................... 21
Deleting images from Gallery................ 22
Using an external screen ...................... 24
Chapter 3 –Exporting images to computer.. 25
Chapter 4 –Configuring your explorē 5 ....... 27
Accessing, navigating in and changing
Settings..................................................... 27
Viewing software/hardware numbers ....... 33
Restoring factory defaults......................... 34
Chapter 5 –Updating your explorē 5 ........... 35
Chapter 6 –Recharging your explorē 5 ....... 36
Chapter 7 –Troubleshooting........................ 42
explorē 5 does not power on................. 42
Screen is black...................................... 44
explorē 5 shuts down after inactivity ..... 45
Colors are difficult to detect .................. 46
There is a lot of glare ............................ 46
Other problems ..................................... 47
Chapter 8 –Cleaning your explorē 5 ........... 48
Cleaning the LCD Screen......................... 48
Cleaning the explorē 5 exterior................. 51
Appendix A –Safety Instructions ................. 53
Appendix B –Technical Specifications ........ 56
Appendix C –Customer Support ................. 58
Appendix D –FCC Information .................... 59
Appendix E –Warranty ................................ 64
Table des matières
Autres manuels Humanware Comprimé
Humanware
Humanware BrailleNote Touch 18 Manuel utilisateur
Humanware
Humanware BrailleNote Touch Manuel utilisateur
Humanware
Humanware Connect PGI-400 Manuel utilisateur
Humanware
Humanware Prodigi DUO Manuel utilisateur
Humanware
Humanware Prodigi DUO Manuel utilisateur
Humanware
Humanware BrailleNote Touch Plus Manuel utilisateur
