Human Touch IJoy-100 Instructions d'utilisation et de sécurité

Table des matières

Autres manuels Human Touch masseur

Human Touch

Human Touch WholeBody 5.1 Manuel utilisateur

Human Touch

Human Touch HT-2620 Manuel utilisateur

Human Touch

Human Touch ZeroG 3.0 Manuel utilisateur

Human Touch

Human Touch iJoy 2580 Manuel utilisateur

Human Touch

Human Touch CIRQLATION HT-1341 Manuel utilisateur

Human Touch

Human Touch foot soother elite Manuel utilisateur

Human Touch

Human Touch ht 149 Manuel utilisateur

Human Touch

Human Touch AcuTouch 8.0 Manuel utilisateur

Human Touch

Human Touch IJOY HT-2720 Manuel utilisateur

Human Touch

Human Touch PC-095 Manuel utilisateur

Human Touch

Human Touch IJOY HT-2720 Manuel utilisateur

Human Touch

Human Touch HT-2620 Manuel utilisateur

Human Touch

Human Touch iJoy Manuel utilisateur

Human Touch

Human Touch acuTouch 9500 Manuel utilisateur

Human Touch

Human Touch Perfect Chair PROZero PC8500 Manuel utilisateur

Human Touch

Human Touch HT-Navitas Sleep Ascent Series Manuel utilisateur

Human Touch

Human Touch feel better HT-5020 Manuel utilisateur

Human Touch

Human Touch iJOY REVEAL Manuel utilisateur

Human Touch

Human Touch Immersion Seating WholeBody 2.0 Manuel utilisateur

Human Touch

Human Touch HT-270 Manuel utilisateur

Human Touch

Human Touch Ht 136 Manuel utilisateur

Human Touch

Human Touch IJOY HT-2720 Manuel utilisateur

Human Touch

Human Touch AcuTouch 840 Manuel utilisateur

Human Touch

Human Touch HT-3020 Manuel utilisateur

Manuels masseur populaires d'autres marques

ELEEELS

ELEEELS P2 Manuel utilisateur

Cenocco

Cenocco CC-9111 Manuel utilisateur

Panasonic

Panasonic EP790-C1 Manuel utilisateur

Adler

Adler AD 2167 Manuel utilisateur

Taurus

Taurus Wellness TW-MC-M Manuel utilisateur

Infinity

Infinity Syner-D Circadian Manuel utilisateur

Hydas

Hydas LH-095 Manuel utilisateur

AEG

AEG FM 5567 Manuel utilisateur

OBH Nordica

OBH Nordica Shiatus Tunes Manuel utilisateur

Hutech

Hutech Q9 Manuel utilisateur

Medisana

Medisana MM 825 Manuel utilisateur

SOLAC

SOLAC Therma Hydro Manuel utilisateur

Invacare

Invacare Texas Manuel utilisateur

Casada

Casada Bismarck II Manuel utilisateur

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manuel utilisateur

Medisana

Medisana HM 886 Manuel utilisateur

HoMedics

HoMedics BA-C200 Manuel utilisateur

Repose

Repose Lynton Manuel utilisateur

Human Touch Confidential Page 1

Human Touch iJoy-100 Replacing the Power Panel

Initiator: MG Replaces: NA Revision date: 09/03/2003

Title: Replacement of the iJoy 100 Side Power Panel and AC Cord

Purpose: To provide end users with the procedure for replacement of the iJoy-100 Side Panel – this

replaces the AC Cord and On/Off Switch.

Tools/Parts Required: Phillips Screwdriver, diagonal cutters

Requires Side Panel Unit with ON/OFF power switch/ AC cord

Procedure:

1) Turn off and unplug your iJoy

2) As an option, you can carefully tip your unit onto its Right Side (the side opposite the

AC cord). This will make it easier to access the assembly and side cover.

3) Locate The Side Panel Assembly. This is the plate that both the AC cord and

remote cord enter. This assembly also incorporates the ON/OFF switch.

4) You will need to either remove the SN/Model information label from the Side Panel

Assembly, or locate the single screw hole covered by the label. You can find the

hole by feeling the sticker for a depression. Using the Phillips Screwdriver, gently

poke a hole to access the screw. See photo for screw location.

5) Remove all Three (3) screws securing the Side Panel Assembly to the chair frame.

6) Carefully lower the Side Panel Assembly. Caution: The Side Panel Assembly

remains connected via cables to the chair.

7) Locate the white 11-pin plug attaching the Remote Control to the Chair. Carefully

disconnect.

8) Disconnect the Red/Violet plug attaching the AC Power to the unit.

9) Remove the screw attaching the Green (Ground) wire to the frame.

10) Locate the four (4) screws securing the Remote Cable Clamp. Remove the four

screws, noting the position of the clamp and the Remote Cable Strain Relief.

11) Slide the Controller Cable out of its holder. Note orientation of holder and remote

cable.

12) Install NEW Side Panel

13) Slide the Remote Cable Clamp back into position. Ensure the tab on the cable

clamp aligns with the insert slot in the cable/cable strain relief.

14) Reinsert the four (4) screws removed in step 8.

15) Reconnect Remote Connector Plug

16) Reconnect AC Power Plug

17) Reattach Green Ground Wire

18) Reinstall the side panel assembly with the three screws removed in step 5.

19) Plug the iJoy back into the wall outlet, and turn the Main Power Switch on.

20) Test the chair for proper operation.

Human Touch Confidential Page 2

Title: Replacement of the iJoy 100 Remote with Cable

PCB

Module

Remote Cord

AC Cord

Access to Screws

* Screw on right may be under product information label

Side Panel Detail

Four screws securing

Cable Clamp to Cover

Remote Control

Cable Connecto

r

*

Slide out clamp to remove

Controller and Cable

AC Cable

Connecto

r

Ground

W

ire