Huion KAMVAS Pro 24 Manuel utilisateur
GT-240
2
EN
Contents
1 / Precautions .............................................................................................................3
2 / Product Overview ..................................................................................................4
2.1 Display Introduction ..................................................................................................................4
2.2 Product and Accessories ..........................................................................................................4
2.3 Display Setting ...........................................................................................................................7
2.4 Install Driver ................................................................................................................................7
3 / Pen Basic Operation ..............................................................................................8
3.1 Hold the Pen .................................................................................................................................8
3.2 Position the Cursor.....................................................................................................................8
3.3 Click .................................................................................................................................................9
3.4 Move ...............................................................................................................................................9
3.5 Use the Side Buttons .................................................................................................................9
3.6 Pen Nib Replacement .............................................................................................................10
4 / OSD Setting ..........................................................................................................11
4.1 OSD Buttons ..............................................................................................................................11
4.2 Brightness Setting ...................................................................................................................11
4.3 Image Setting ............................................................................................................................12
4.4 Color Temp. Setting ................................................................................................................12
4.5 OSD Setting ...............................................................................................................................13
4.6 Reset .............................................................................................................................................13
4.7 MISC .............................................................................................................................................14
5 / Function Setting ...................................................................................................15
5.1 Working Area Setting .............................................................................................................15
5.2 Press Keys Function Setting .................................................................................................16
5.3 Display Setting ..........................................................................................................................18
5.4 Pen Buttons Function Setting and Pen Nib Activity Setting .....................................20
5.5 Enable the Windows Ink feature ........................................................................................20
5.6 Pressure Sensitivity Setting ..................................................................................................21
5.7 Pen Pressure Testing ...............................................................................................................22
5.8 Data Export and Import ........................................................................................................22
6 / Specifications .......................................................................................................23
7 / Trouble Shooting .................................................................................................24
GT-240
3
EN
【Please read this manual carefully before using, and keep it well for future reference.】
/ Precautions
1
--Before cleaning the display, please unplug the USB cable and wipe with a soft damp
cloth, do not use any kind of detergents.
--Please don't place the display near water sources such as bathtub, washbasin, sinks,
washing machine, damp basement, swimming pool, etc.
--Do not place the display on where is unstable or a height for children reaching easily in
order to avoid danger.
--Do not place the display and digital pen close to the magnetic field.
--The grooves and holes on the back case is designed for ventilation to prevent the
monitor from overheating. Please don't place the display on beds, sofas, carpets or in
embedded device.
--Only power supplies shown on the nameplate can be used for the display. If you have
questions about the power supply which you are using, please consult the distributor of
your display.
--To protect your display, please switch off the power when it is not in use. During
blackouts or not using for long time, please unplug the display from the socket.
--Make sure no foreign bodies get inside the monitor through grooves and prevent liquid
from splashing on the display as to prevent short-circuit or fire.
--If the display has a breakdown, do not open the main case and try to repair it by yourself.
Please ask for a service for proper repair and maintenance.
--When the following situations occur, please unplug the power adapter and you may need
a service for full repair and maintenance:
A. The power wire or plug is damaged or worn out;
B. There is liquid splashed inside of the display;
C. The display has fallen or the LCD is broken;
D. When obvious abnormalities occur to the display.
--While getting the components replaced, you are supposed to guarantee that the
repairman is using the substitute components specified by the manufacturer. Unauthorized
component replacement might cause fire, electric shocks or other dangers.
GT-240
4
EN
/ Product Overview
2
2.1 Display Introduction
Thanks for choosing HUION® KAMVAS® Pro 24 creative display. This is a new
generation of desktop-level professional drawing display, which can greatly improve
your work efficiency of painting and creation, and full of fun. You can freely paint
and write, depicting different lines and colors, just as the pen writes on the paper,
which brings you a real shock experience.
To give you a better understanding and using of your display, please read this user
manual carefully. The user manual only shows the information under Windows,
unless otherwise specified, this information applies to both Windows and Mac
systems.
2.2 Product and Accessories
USB Port
Power Port
Anti-slippery Rubber
VGA Port
OSD Buttons
DP Port
HDMI Port
Working Area
Press Keys
Touch Bar
LED Indicator
Adjustable Stand
GT-240
5
EN
Battery-free pen Replacement Nibs
(inside the pen holder)
Pen Holder
Quick Start Guide Warranty Card
Power Adapter Power Cable HDMI Cable USB Cable
Quick Start Guide Warranty Card
Cleaning Cloth
Pen Nib Clip
(inside the pen holder)
2.2.1 Accessories
2.2.2 Adjustable Stand
We designed this ergonomic adjustable stand specially for your KAMVAS display,
you can adjust the angle of the display according to your usage habit, and make
you feel more comfortable when painting and creating.
By dragging this switch to adjust
the stand angle from 20° -80°
GT-240
6
EN
2.3 Setting Up Display
[1] Take out the pen display and stand from the package, then assemble the stand
to the back of the display with attached screwdriver according to the following
instruction.
①
①
②
②
③
③
④
④
Adjust the stand angle
by dragging this switch
[2] As shown on the below, connect the pen display to your computer with
attached power adapter, HDMI cable and USB Cable.
[3] Press the power button on the bottom of the display to power on the display.
USB Cable
HDMI Cable
Power Cable
Power Adapter Power Button
GT-240
7
EN
2.4.3 Driver Page
After the download is successful, double-click to open the driver, connect the
display to your computer with attached power adapter, HDMI cable and USB
Cable.
When the connection is complete, watch for a prompt at the bottom left of the
driver page that display two states "Device disconnected" or "Device connected".
Notes:
[1] Before installing, you need to uninstall other driver of similar products, including
the old driver of this product.
[2] Before installing, please close all graphics software and anti-virus software to
avoid unnecessary mistake.
2.4 Install Driver
2.4.1 OS Support
Windows 7 or later, macOS 10.12 or later.
2.4.2 Install Driver
Please download the driver from our website: www.huion.com/download
After finishing installation, you can find the driver icon " " in the system tray area,
which means the driver was installed successfully; when you connect the display
to computer, the icon will change to color " ", which means the driver has already
recognized the display and you can start using it now.
GT-240
8
EN
3
3.1 Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you
can toggle the side switch easily with your thumb or forefinger. Be careful not to
accidentally press the switch while drawing or positioning with the pen.
Notice:
When not in use, place the pen in the pen case or on the desk. Do not place the
pen on the surface of screen, which may interfere with the use of other screen
cursor positioning equipment, may also cause your computer can not enter the
sleep mode.
3.2 Position the cursor
Move the pen slightly above the active area without touching the screen surface,
the cursor will move to the new position accordingly.
Press the pen tip on the screen to make a selection. Tap the screen once with the
pen tip, or touch it to the screen with enough pressure to register a click.
/ Pen Basic Operation
GT-240
9
EN
3.3 Click
Use the pen tip to tap once on the screen to register a click. Tap to highlight or
select an item on the screen and double-click to open it.
3.4 Move
Select the object, then slide the pen tip across the screen to move it.
3.5 Use the side buttons
The buttons on the pen can be set to two different customizable functions.
You can use the buttons whenever the pen tip is within 10mm of the display active
area.
You do not have to touch the pen tip to the display in order to use the switch.
GT-240
10
EN
3.6 Pen Nib Replacement
The nib will be worn off after using for a long time, then you need to replace a
new nib.
[1] Anticlockwise rotate the pen holder to open the cover, take a new nib out.
[2] Insert the pen nib into the pen nib clip and tilt the pen to pull out the old nib.
[3] Insert the new nib straight into the pen and push the nib slowly and firmly
until it stops.
Autres manuels pour KAMVAS Pro 24
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Huion Moniteur
