Huawei IPC6061-FP Manuel utilisateur

IPC6061-FP

V300R019C00

Quick Start Guide

Issue 01

Date 2019-02-22

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,

and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://e.huawei.com

Contents

1 Important Safeguards and Warnings.........................................................................................1

2 Unpacking Inspection...................................................................................................................5

3 Device Framework.........................................................................................................................6

3.1 Structure and dimension................................................................................................................................................. 6

3.2 Dimensions..................................................................................................................................................................... 9

4 Installation.................................................................................................................................... 10

4.1 (Optional) Install the SD Card......................................................................................................................................10

4.2 Fix Device.....................................................................................................................................................................11

4.3 Connect Device Cables.................................................................................................................................................14

5 Network Configuration..............................................................................................................17

5.1 Set the Initial Password................................................................................................................................................ 17

5.2 Modify IP Address........................................................................................................................................................19

5.3 Login Web Interface..................................................................................................................................................... 20

6 Warranty Card.............................................................................................................................. 21

IPC6061-FP

Quick Start Guide Contents

1 Important Safeguards and Warnings

The following describes the instructions for using the device. To prevent crisis and asset

losses, carefully read the instructions before using the device and strictly comply with the

instructions during device usage. Please keep this user manual well for future reference.

FCC SDOC Compliance Statement

Supplier's Declaration of Conformity (SDoC)

Unique Identifier: trade name: HUAWEI; product name: Network camera; model number:

IPC6061-FP

Responsible Party- U.S. Contact Information

Huawei Technologies USA Inc.

5700 Tennyson Parkway, Suite 500

Plano, Texas 75024

Main: 214-919-6000 / TAC Hotline: 877-448-2934

FCC Compliance Statement ( for products subject to Part 15)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Symbol Conventions

The symbols that may be found in this document are defined as follows:

Symbol Description

Indicates an imminently hazardous situation

which, if not avoided, will result in death or

serious injury.

Indicates a potentially hazardous situation

which, if not avoided, could result in death

or serious injury.

IPC6061-FP

Quick Start Guide 1 Important Safeguards and Warnings

Symbol Description

Indicates a potentially hazardous situation

which, if not avoided, may result in minor

or moderate injury.

Indicates a potentially hazardous situation

which, if not avoided, could result in

equipment damage, data loss, performance

deterioration, or unanticipated results.

NOTICE is used to address practices not

related to personal injury.

Calls attention to important information,

best practices and tips.

NOTE is used to address information not

related to personal injury, equipment

damage, and environment deterioration.

Electrical safety

lAll installation and operation should conform to your local electrical safety codes.

lMake sure the power supply is correct before operating the device.

lThe power source shall conform to the requirement of the Safety Extra Low Voltage

(SELV) standard, and supply power with rated voltage which conforms to Limited power

Source requirement according IEC60950-1. Please note that the power supply

requirement is subject to the device label.

lA readily accessible disconnect device shall be incorporated in the building installation

wiring.

lPrevent the power cable from being trampled or pressed, especially the plug, power

socket and the junction extruded from the device.

Environment

lDo not aim the device at strong light to focus, such as lamp light and sun light, otherwise

it might cause over brightness or light marks, which are not the device malfunction, and

affect the longevity of Charge Coupled Device (CCD) or Complementary Metal-Oxide

Semiconductor (CMOS).

lTransport, use and store the device within the range of allowed humidity and

temperature.

lDo not place the device in a damp or dusty environment, extremely hot or cold

temperatures, or the locations with strong electromagnetic radiation or unstable lighting.

lKeep the camera away from water or other liquid to avoid damages to the internal

components.

lKeep the indoor device away from rain or damp to avoid fire or lightning.

lKeep sound ventilation to avoid heat accumulation.

lPack the device with standard factory packaging or the equivalent material when

transporting the device.

IPC6061-FP

Quick Start Guide 1 Important Safeguards and Warnings

lHeavy stress, violent vibration or water splash are not allowed during transportation,

storage and installation.

lThe device needs to be installed in the location where professional staff can cover

(professionals need to know the attentions of using the device), non-professionals are not

allowed to enter device installation area when the device is operating normally, which

may cause accidental damage.

lEnsure the network link quality during project construction and device installation.

lWhen a camera is installed near the seaside or salt water lake, ensure that the camera is

more than 10 km away from the coastline and lake shoreline.

Operation and Daily Maintenance

lDo not directly touch the heat dissipation component of the device to avoid scald.

lDo not dismantle the device because there is no component that can be fixed by users

themselves. Otherwise, it might cause water leakage or bad image due to unprofessional

dismantling. Please contact after-sale service to replace desiccant when it becomes green.

(The desiccant is not provided by default)

lIt is advised to use the device together with lightning arrester to improve lightning

protection effect.

lIt is advised to get the grounding holes to be grounded to enhance the reliability of the

device.

lDo not directly touch the optic component CCD or CMOS. You can use the air blower to

blow away the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to

wipe away the dust gently if necessary.

lUse the dry soft cloth to clean the device. If the dust is difficult to be removed, please

wipe it away with a clean cloth wetted slightly by the mild detergent, and then use the

dry cloth to clean the device. Do not use volatile solvents like alcohol, benzene, thinner,

or strong detergent with abrasiveness, otherwise it will damage the surface coating or

reduce the working performance of the device.

lThe IPC shield is a kind of optical component, please do not touch or wipe the shield

surface during installation and application, it may stain dust, grease or fingerprint, you

can use absorbent cotton to dip some diethyl ether or use soft cloth to dip some water

and then wipe gently. You can also use air gun to remove the dust if the shield is stained

with dust.

IPC6061-FP

Quick Start Guide 1 Important Safeguards and Warnings

lPlease strengthen the protection of network, device data and personal information, adopt

necessary measures of guarantee device network security, including but not limited to

using strong password, modifying password regularly, upgrading firmware to the latest

version, isolating computer network and so on. For the IP camera firmware of some old

version, the ONVIF password will not be modified automatically after the main password

of the system is modified. You need to upgrade the camera firmware or upgrade the

ONVIF password manually. Please modify the default password after login to avoid being

stolen. For details about how to change the ONVIF password, see ONVIF User in the User

Manual.

lUse the standard components provided by manufacturer and make sure the device is

installed and fixed by professional engineers.

lThe surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

lDo not provide two or more power supply sources for the device; otherwise it might

damage the device.

Disclaimer

lThis manual is for reference only. Please refer to the actual product for more details.

lMinor differences might be found in user interface, and there might be deviation between

the actual value of some data and the value provided in the manual due to the reasons

such as the real environment is not stable. Please refer to the final explanation of the

company if there is any doubt or dispute.

lThe company is not liable for any loss caused by the operation that does not comply with

the manual.

lPlease contact the supplier or customer service if there is any problem occurred when

using the device.

lIf the obtained PDF file cannot be opened, upgrade the reading tool to the latest version

or use another mainstream reading tool.

lAll the designs and software are subject to change without prior written notice. The

manual will be regularly updated according to the product upgrade without prior

announcement.

lIf there is any uncertainty or controversy, please refer to our final explanation.

IPC6061-FP

Quick Start Guide 1 Important Safeguards and Warnings

2 Unpacking Inspection

Before installation, open the package and check whether all the accessories are included. For

details, see the accessory list delivered with the device. For details about the configuration,

see the specific product documentation.

IPC6061-FP

Quick Start Guide 2 Unpacking Inspection

3 Device Framework

3.1 Structure and dimension

3.2 Dimensions

3.1 Structure and dimension

NOTE

lThe following structure figure is for reference only. It is only used to understand the functions of

device external ports.

lThere might be some minor differences between different devices, so please refer to the actual

products you purchased.

IPC6061-FP

Quick Start Guide 3 Device Framework

Figure 3-1 External ports

Please refer to Table 3-1 and Table 3-2 for more details about external port functions and I/O

port functions.

Table 3-1 External port functions

Port Port name Connect

Function description

1 Power Power

input

port

- Connects to 12 V DC power. Please be sure

to power the device according to the label

instruction.

NOTE

It may cause damage to the device if it fails to

power the device according to label instruction.

2 LAN Network

port

Ethernet

port

Connects to the standard Ethernet cable and

provides

PoE power supply.

NOTE

Some devices do not support PoE power supply.

3 AUDIO

Audio

input port

RCA Receives analog audio signal from pickup

and so on.

4 AUDIO

OUT

Audio

output port

RCA Outputs audio signal to speaker and some

other devices.

IPC6061-FP

Quick Start Guide 3 Device Framework

Table des matières

Autres manuels Huawei Système de sécurité

Huawei

Huawei IVS1800 Manuel utilisateur

Huawei

Huawei eLTE2.1 eA660 Series CPE Caractéristiques techniques

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur