Huawei D100 Manuel utilisateur
Wonderful Communication, Mobile Life.
Welcome to HUAWEI D100 Wi-Fi/LAN Adapter.
HUAWEI D100 Wi-Fi/LAN Adapter
User Guide
Copyright © 2008 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by
any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks
and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All
other trademarks and trade names mentioned in this manual are the
property of their respective holders.
Safety Precautions
Read the safety precautions carefully to ensure the correct and safe use of
your wireless device. For detailed information, see "Warnings and
Precautions."
Do not switch on your device when the device use is prohibited
or when the device use may cause interference or danger.
Do not use your device while driving.
Follow the rules or regulations in hospitals and health care
facilities. Switch off your device near medical apparatus.
Switch off your device in an aircraft. The device may cause
interference to control signals of the aircraft.
Switch off your device near high-precision electronic devices.
The device may affect the performance of these devices.
Do not attempt to disassemble your device or its accessories.
Only qualified personnel are allowed to service or repair the
device.
Do not place your device or its accessories in containers with
strong electromagnetic field.
Do not place magnetic storage media near your device.
Radiation from the device may erase the information stored on
them.
Do not put your device in a high-temperature place or use it in a
place with flammable gas such as a gas station.
Keep your device and its accessories away from children. Do
not allow children to use your device without guidance.
Use approved accessories only to avoid explosion.
Observe the laws or regulations on device use. Respect others’
privacy and legal rights when using your device.
i
Table of Contents
1 Quick Start.............................................................................................................................2
2 Using the Management Page ................................................................................................6
Logging in to the Management Page.............................................................................6
Management Page Overview.........................................................................................6
Viewing the Configuration Information........................................................................7
Quick Setup ...................................................................................................................7
Accessing the Internet ...................................................................................................9
3 Configuring Your Computer ...............................................................................................11
Wireless Configuration................................................................................................11
Configuring the PC Network.......................................................................................12
4 Advanced Settings...............................................................................................................15
Advanced Settings Overview......................................................................................15
System Management ...................................................................................................15
SIM Card Settings .......................................................................................................17
Mobile Network Settings.............................................................................................17
Dial-up Settings...........................................................................................................18
DHCP Settings.............................................................................................................19
WLAN Settings ...........................................................................................................19
5 Security Settings..................................................................................................................23
6 Troubleshooting...................................................................................................................27
7 Warnings and Precautions...................................................................................................31
8 Abbreviations ......................................................................................................................35
2
1 Quick Start
Note:
The supported functions and displayed appearance are subject to your
product purchased. Pictures posted for illustration purpose only. Please
refer to the product for actual appearance. For details of your product
selection, consult your service provider.
Appearance
USB Interface
Power On/Off
Ethernet Interface
Power Interface
Signal St rengt h
USB Modem Indicator
WLAN Indicator
Pow er Indicator
Data Card
Installation
Step 1: Connect with the data card through the USB interface.
Note:
yUse the specified data card to connect with the device.
yThe data card is provided by your operator. Please consult your operator
for detailed information.
yMake sure that the SIM card is inserted into the data card.
3
WLAN
Power Adapter
Step 2: Connect to a PC through an Ethernet cable or WLAN.
If the indicator of the Ethernet interface connecting with a network cable is on, the
PC lineate connection is successful. The Ethernet cable cannot be longer than 100
meters (328 feet). To achieve better effect, use the shielded cable.
Whether the PC wireless connection is successful, please check your PC
connected through WLAN. For details, please see “Configuring Your Computer”.
If connect your device to one PC with the Ethernet cable and other PCs with WLAN
simultaneously, you have constructed a LAN and can share the local resources.
Step 3: Connect with the power adapter.
Caution:
yUse the compatible power adapter; otherwise, the device may be
damaged.
yPlease use the AC/DC power supply defined in the specifications of the
charger. An improper power voltage can cause fire or malfunction of the
charger.
4
Step 4: Place the device
Caution:
To avoid electrical devices from interfering by the wireless signal, place
electrical devices one meter away from the device.
The device can be placed horizontally or vertically on a table. Place the device on a
higher place or near the window, or turn the USB interface connected with the data
card upright, so it can receive stronger signals.
Switching On/Off
Press the Power key to switch on the device; press and hold the Power key to
switch off the device.
Viewing the Running Status Through the Indicators
yPower: Steady on and in green; the device is switched on successfully.
yModem: Steady on and in green; the data card is connected successfully.
ySignal: Steady on and in green; the signal strength is strong. Blinking in green;
the signal strength is weak; Indicator off, the SIM card faults (The SIM card does
not exist or the PIN code is not authenticated) or the signal strength is inexistent.
yWLAN: Steady on and in green; the WLAN is enabled. Blinking in green; data is
transmitting.
Dial-up Access
By default, the device dials up to access the Internet as required. You can directly
use the network services such as web browsing, and receiving or sending emails.
If you need to configure the other device-related parameters, you need to access
the device management page (http://192.168.1.1). For details, please read on.
Restoring the Factory Defaults
If you need to reconstruct the network or you forget the changes of some
parameters, you can restore factory defaults and reconfigure the device.
5
Reset
Reset: Press and hold the Reset key to restore the factory defaults.
Note:
After this operation, all configurations are restored to the defaults.
6
2 Using the Management Page
Logging in to the Management Page
1. Start the Internet browser and enter the address http://192.168.1.1 in the
address bar.
2. Select a user type, enter the password, and then click Login.
yAdmin: This user type is authorized to view and change the configurations. The
default password is admin.
yUser: This user type is authorized to view only the basic status information. The
default password is user.
Note:
To avoid the configuration conflict, only one user is allowed to log in to the
management page at a time.
Management Page Overview
Operation Functions
The following table shows the main operations in the management page.
Item Description
Basic Status Displays the parameter configuration status of the device.
Quick Setup Quickly configures the device.
Connection Displays the network connection status and connects to
the network.
Advanced Settings Configures the advanced settings.
Security Configures the security settings.
Logout Log out of the management page.
Device Status
The following table shows the status information of the device.
Autres manuels pour D100
2
Table des matières
Autres manuels Huawei Adaptateur
