Huawei FusionCol8000-E260 Manuel utilisateur
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario)
Issue 01
Date 2022-06-30
HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.
Copyright © Huawei Digital Power Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Digital Power Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei
Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features
described in this document may not be within the purchase scope or the usage scope. Unless otherwise
specied in the contract, all statements, information, and recommendations in this document are
provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Digital Power Technologies Co., Ltd.
Address: Huawei Digital Power Antuoshan Headquarters
Futian,Shenzhen 518043
People's Republic of China
Website: https://e.huawei.com
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. i
About This Document
Purpose
This document describes the FusionCol8000-E modular indirect evaporative
cooling system in terms of product overview, installation, power-on
commissioning, and operation and maintenance (O&M), providing systemic
knowledge of the FusionCol8000-E.
Intended Audience
This document is intended for:
● Technical support engineers
● Hardware installation engineers
● Commissioning engineers
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) About This Document
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. ii
Symbol Description
Supplements the important information in the main
text.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Change History
Issue Date Description
01 2022-06-30 This issue is the rst ocial release.
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) About This Document
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. iii
Contents
About This Document................................................................................................................ ii
1 Installation Precautions......................................................................................................... 1
2 Materials....................................................................................................................................2
2.1 Water Rell Pipe and Drainpipe.........................................................................................................................................2
2.2 Cables.......................................................................................................................................................................................... 3
3 Installing a Unit....................................................................................................................... 6
3.1 Unpacking and Checking...................................................................................................................................................... 6
3.2 Securing a Unit.........................................................................................................................................................................7
3.3 Checking the Refrigerant...................................................................................................................................................... 9
3.4 Turning Over an Outdoor Exhaust Fan............................................................................................................................9
3.5 Removing Transport Fasteners and Desiccant Bags................................................................................................. 14
4 Installing Pipes.......................................................................................................................16
5 Installing Optional Components....................................................................................... 18
5.1 Installing a Conductivity Sensor...................................................................................................................................... 18
5.2 Installing a Maintenance Socket and Residual Current Circuit Breaker............................................................ 18
6 (Optional) Installing Continuous Cooling Devices....................................................... 20
7 Installing Cables.................................................................................................................... 21
7.1 Precautions.............................................................................................................................................................................. 21
7.2 Routing Cables....................................................................................................................................................................... 21
7.3 Installing Active/Standby Power Cables........................................................................................................................23
7.4 (Optional) Installing Standby DC Power Cables........................................................................................................ 24
7.5 Installing Air Supply Fan Cables...................................................................................................................................... 26
7.6 (Optional) Installing Teamwork and Monitoring Communications Cables......................................................27
7.6.1 Preparing a Network Cable............................................................................................................................................27
7.6.2 CAN Teamwork + RS485 Monitoring..........................................................................................................................28
7.6.3 CAN Teamwork + FE Monitoring................................................................................................................................. 29
7.6.4 FE Teamwork + RS485 Monitoring..............................................................................................................................30
7.6.5 FE Teamwork + FE Monitoring..................................................................................................................................... 31
7.7 (Optional) Installing Signal Cables.................................................................................................................................33
7.8 (Optional) Installing T/H Sensors Outside the Unit and Cables.......................................................................... 36
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) Contents
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. iv
8 Installing Fire Dampers........................................................................................................40
9 Installing Air Ducts............................................................................................................... 42
10 Verifying the Installation.................................................................................................. 44
11 Power-On Commissioning.................................................................................................47
11.1 Preparing for Power-On................................................................................................................................................... 47
11.2 (Optional) Commissioning Continuous Cooling Devices......................................................................................47
11.3 Powering On the Unit....................................................................................................................................................... 49
11.4 Home Screen........................................................................................................................................................................ 60
11.5 Initial Conguration.......................................................................................................................................................... 63
11.5.1 Setting T/H Sensor Parameters.................................................................................................................................. 63
11.5.2 (Optional) Setting the Pressure Dierence Control............................................................................................66
11.5.3 (Optional) Setting Conductivity Sensor Parameters...........................................................................................67
11.5.4 (Optional) Setting Teamwork Parameters............................................................................................................. 67
11.5.5 Setting Communications Parameters.......................................................................................................................73
11.5.5.1 Setting Access Control Parameters........................................................................................................................73
11.5.5.2 Setting Communications Parameters (Modbus-RTU Protocol)...................................................................74
11.5.5.3 Setting Communications Parameters (Modbus-TCP Protocol).................................................................... 75
11.5.5.4 Setting Communications Parameters (SNMP Protocol).................................................................................76
11.5.5.5 (Optional) Setting WiFi Parameters......................................................................................................................79
11.6 Startup....................................................................................................................................................................................79
11.7 Wizard Startup.................................................................................................................................................................... 82
11.8 (Optional) Power-O........................................................................................................................................................84
11.9 Checking After Commissioning......................................................................................................................................85
A Physical Ports......................................................................................................................... 86
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) Contents
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. v
1 Installation Precautions
Checking the Auxiliary Facilities
● The horizontal and height errors between concrete platforms must be less
than 5 mm.
● Concrete pads or passages with the bearing capacity meeting local civil work
standards can be built on the eld outside the concrete platforms for access
and maintenance.
Checking the Drainage Capacity
There should be drainage ditches with sucient drainage capacity.
NO TICE
The layout and installation of pipes should facilitate the maintenance of the unit.
Checking Electrical Access for Auxiliaries
Install the unit in strict accordance with the HVAC system construction regulations.
To ensure proper operation of the unit, protect it against dust, dirt, corrosive gas,
and high humidity.
Connection Engineering Precautions
● Air duct installation: It is recommended that exible connections be used
between the unit and air duct. Prepare air ducts based on site requirements.
● Pipe thermal insulation: Take thermal insulation measures for all inlet pipes
and drainpipes of the unit. Reserve sucient space for maintenance and
operations when installing thermal insulation foam for valves and connectors.
At low temperatures, take thermal insulation measures to prevent water pipes
from freezing.
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) 1 Installation Precautions
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 1
2 Materials
Table 2-1 Material description
Item Description Type
Standard
material
This type of materials is
delivered with the unit and
can be obtained from the
ttings bag.
Materials in the packing list
Auxiliary
material
Customers can purchase this
type of materials from the
supplier or other vendors.
Power cable, teamwork cable,
and monitoring cable
Optional
material
Customers can purchase this
type of materials from the
supplier based on application
scenarios.
T/H sensor, smoke sensor,
water sensor, and conductivity
sensor
Engineering
procurement
Customers need to prepare
this type of materials by
themselves.
Drainpipe, water rell pipe,
pipe support, re damper
(switch type), air duct, power
cable terminal, and
equipotential ground lug or
equipotential ground cable.
2.1 Water Rell Pipe and Drainpipe
Table 2-2 Pipe specications
Item Connector Dimensions Material
Spray water
rell pipe
G 1 inch external
thread connector
DN25 Rigid pipe (made of PP-
R or other materials)
Pump water
pan drainpipe
G 1 inch external
thread connector
DN25 Rigid pipe (made of PP-
R or other materials)
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) 2 Materials
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 2
Item Connector Dimensions Material
Spray drainpipe G 1-1/2 inch
external thread
connector
DN40 Rigid pipe (made of PP-
R or other materials)
Condensate
drainpipe
G 1 inch external
thread connector
DN25 Rigid pipe (made of PP-
R or other materials)
2.2 Cables
NO TICE
● The cable diameter must comply with local cable standards. The factors that
aect cable selection include the rated current, cable type, routing mode,
ambient temperature, and maximum expected line loss.
● Waterproof connectors for cables should be designed according to the
recommended cable specications in the following table. If a cable used onsite
does not meet the recommended specications, the cable may fail to be routed
through the waterproof connector or the waterproof connector may fail to be
secured.
● The onsite grounding resistance must comply with related standards.
Table 2-3 Recommended cable specications
Item Recommended Specications
Power cable
(default power)
● Active power input: electronic|electric cable, 600 V/
1000 V, ZA-YJV, (3 x 70 + 1 x 35) mm2, outdoor cable,
CE
● Standby power input: electronic|electric cable, 600 V/
1000 V, ZA-YJV, (3 x 70 + 1 x 35) mm2, outdoor cable,
CE
● (Optional) Standby DC input: electronic|electric cable,
600 V/1000 V, ZA-YJV, 50 mm2, black, 209 A, single-
core double insulation, CE
Power cable
(maximum power)
● Active power input: electronic|electric cable, 600 V/
1000 V, ZA-YJV, (3 x 95 + 1 x 50) mm2, outdoor cable,
CE
● Standby power input: electronic|electric cable, 600 V/
1000 V, ZA-YJV, (3 x 95 + 1 x 50) mm2, outdoor cable,
CE
● (Optional) Standby DC input: electronic|electric cable,
600 V/1000 V, ZA-YJV, 70 mm2, black, 209 A, single-
core double insulation, CE
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) 2 Materials
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 3
Item Recommended Specications
T/H sensor cable,
water sensor (rope
type), and
teamwork and
monitoring
communications
cables
CAT 5e or higher shielded network cable
Fire damper cable Power cable: 3 x 1 mm2 outdoor copper cable
Feedback signal cable: 2 x 22 AWG outdoor copper cable
Air damper cable 4 x 1 mm2 outdoor copper-core cable
Equipotential
ground lug/ground
cable
● Ground lug: Use hot-dip zinc-coated at steel sheet
with a cross-sectional area greater than or equal to 50
mm2.
● Ground cable: Use equipotential ground cables with a
cross-sectional area of at least 16 mm2 and route the
ground cables through a plastic-coated metal hose.
Table 2-4 Cable terminal requirements (default power)
Connector Terminal Specications Quantity
Power cable terminal AC bare crimp terminal,
DT, 70 mm2, M20, tin
plating
6
Power PE cable
terminal
Bare crimp terminal, DT,
35 mm2, M10, tin plating
2
Standby DC power
cable terminal
AC bare crimp terminal,
DT, 50 mm2, M10, tin
plating
2
Table 2-5 Cable terminal requirements (maximum power)
Connector Terminal Specications Quantity
Power cable terminal AC bare crimp terminal,
DT, 95 mm2, M20, tin
plating
6
Power PE cable
terminal
Bare crimp terminal, DT,
50 mm2, M10, tin plating
2
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario) 2 Materials
Issue 01 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 4
Autres manuels pour FusionCol8000-E260
1
Table des matières
Autres manuels Huawei Accessoires
Huawei
Huawei BTS3900A Manuel utilisateur
Huawei
Huawei RRU3942 Mode d’emploi
Huawei
Huawei NetCol5000-A050 Manuel utilisateur
Huawei
Huawei iSiteC BTS3601C Manuel utilisateur
Huawei
Huawei YDS60-80 Manuel utilisateur
Huawei
Huawei 3900 Series Manuel utilisateur
Huawei
Huawei NetCol5000-A Manuel utilisateur
Huawei
Huawei Airbridge cBTS3612 Manuel utilisateur
Huawei
Huawei pBTS3701 Manuel utilisateur
Huawei
Huawei Airbridge BTS3612A Manuel utilisateur
Huawei
Huawei Alita-CB010 Manuel utilisateur
Huawei
Huawei BTS3900 V200R010 Manuel d'utilisation
Huawei
Huawei Airbridge DBS3900 Manuel utilisateur
Huawei
Huawei pRRU3901 Mode d’emploi
Huawei
Huawei Airbridge DBS3900 Manuel utilisateur
Huawei
Huawei DTSU666-HW Manuel utilisateur
Huawei
Huawei BTS3900A Manuel utilisateur
Huawei
Huawei M-Pen lite Manuel utilisateur
Huawei
Huawei NetCol5000-A025 Manuel utilisateur
Huawei
Huawei RRU3201 Manuel du propriétaire
