HTI HT-101 Manuel utilisateur
Mobile Phone Thermal Imager
HT-101 HT-201
April 18, 2019
Revision number: 1.0
Instruction Manual
1
Overview
Use of the product
The product is connected through mobile phone and is
operated on the mobile phone through “Ht-Xintai” software. It is
very easy to check infrared images and measure surface
temperature of objects. The product may be used for heating
and ventilation air conditioner and building heat difference test,
equipment fault removal, preventive and predictive mainte-
nance, etc.
Download of application software
Scan the following two-dimensional code to download applica-
tion software “Ht-Xintai” and install it.
Two-dimensional code application software of products
2
The dialogue box pops out when the mobile phone is used to
connect the thermal imager. Check “used for the USB
equipment at default condition”. Click “enter”. When the mobile
phone is connected with thermal imager, photographing,
recording, access to media content and other authorities
request pop out, the users may grant permission.
2. Connect the mobile phone to open application software of the
product and insert thermal imager into the mobile phone.
Please obtain mobile phone authority, click “Allow”
Manufacturer LOGO
color palette
3
Imaging area
Introduction to software interface
Function bar
slide the function bar left and
right to display concealing
function of software.
Introduction software function
Media library: Check image and video.
Photographing: Click to make photo.
Video recording: Click to begin recording.
Color palette: May select white hot, black hot,
iron red, rainbow, north pole and lava.
Effect picture of color palette
4
White hot Black hot Iron red
Normal
max
min
highest temperature
IR
Full frame mode: Display multiple temperature data.
Visible light+ Infra-Red Mode: The visible light images
and infrared images are displayed side by side.
5
Rainbow north pole lava
Normal mode: Restore to default infrared imagery
observation mode.
Cursor mode: Display the cursor of the central point,
temperature point of prevision positioning.
High/low temperature snap mode: Snap the lowest and
Model HT-101 HT-201
-40℃ to 330℃
Temperature range
Wavelength range 8 – 14μm
Field angle/focus length 27°×35°
-40℃ to 330℃
8 – 14μm
26°×34°
Resolution 220x160 320x240
6
If disconnection appears during the work and there is no image
display, the following methods may be adopted.
1. Close “Ht-Xintai” software and open again;
2. Switch off the thermal imager and connect it with mobile
phone again.
3. Check your mobile phone setting, set the mobile phone as
“external power supply”.
Fault and solution
Technical parameters
Image format
Video format
Frame rate
Target size
Focusing mode
Detection scope
Shortest focal
length
: Cover 4 pixels
0 ℃to 40 ℃
-20℃to 60 ℃
Type-C , micro USB ,
5V（External equipment power supply）
40g
300m
0.15m
jpg
mp4
9Hz
Fixed
7
Detection
definition
When one object is found in the field of view,
the image of the object must occupy more
than 1.5 pixel in the directionof critical size.
Work temperature
Storage temperature
Plug
Weight
Power provision
Dongguan Xintai Instrument Co.,Ltd.
Add: Building F, No. 22 Yuhua Street, Hongye Industrial Zone,
Tangxia Town, Dongguan City, Guangdong Province
Postcode:523710
Tel:+86-769-82612006
Fax:+86-769-82612005
Website:www.hytechcn.com.cn
www.xintest.com.cn www.xintest.en.alibaba.com
Scan QR code to download and install APP
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HTI Équipement de laboratoire
Manuels Équipement de laboratoire populaires d'autres marques
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuel utilisateur
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuel utilisateur
NI
NI PXI-5422 Manuel
Collomix
Collomix Aqix Manuel utilisateur
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur
Ocean Insight
Ocean Insight FLAME-NIR+ Manuel utilisateur
