HS-Technik BTC-24 Manuel utilisateur
- 2 -
- 3 -
1 Operang principles
1.1 Scope of delivery 4
1.2 General informaon 4
1.3 Signs and symbols used 5
1.4 Structure of the warnings 6
1.5 Technical terms and abbreviaons used 6
1.6 Intended use 7
1.7 Improper use 7
1.8 Dues of the operator 7
1.9 Dues of personnel 8
1.10 Training of personnel 8
1.11 Guarantee and liability 8
1.12 Copyright 9
2 General safety informaon for power tools
3 Important informaon about this device
3.1 Structural modicaons 11
3.2 Cleaning the device and disposal 11
4 Start-up and use
4.1 Device structure 13
4.2 Start-up of the BTC-24 14
4.2.1 Assembly of the BTC-24 14
4.2.2 Connecon to the BTC 14
4.3 Funconal designaon of I/O's 15
4.4 Interface to digital input modules 16
4.5 Interface to relay output modules 17
4.6 Maintenance and servicing 18
5 Storage
6 Technical data
7 Troubleshoong and Fault repair
CE Declaraon of conformity
PAGE
4
PAGE
10
PAGE
11
PAGE
12
PAGE
19
PAGE
20
PAGE
21
PAGE
22
Table of contents
- 4 -
1 Operang principles
Dear customers,
thank you for choosing a HS-Technik GmbH product.
This quality product „Made in Germany“ fulfils the highest requirements with regard to
performance, quality and accuracy. When used correctly the product will undoubtedly
perform very well for many years.
These operating instructions contain information on safety and for the operation of the
BTC-24. In addition it contains information on the dimensions and technical data. We
would be happy to assist you with additional information or to answer your questions.
Our technical support and our technicians would be happy to assist you.
1.1 Scope of delivery
• BTC-24 extension
• Cable for power supply
• Ethernet cable
• Operang instrucons
1.2 General informaon
Read the device operang manual before inial operaon. Please pay parcular aenon
to Chapter 2 „General Safety Notes“.
This manual should make it easier for the operator to get used to the device and of
its intended applicaon possibilies. The operang instrucons include important
informaon related to the safe and proper operaon of the device. Compliance with
these instrucons helps you to:
• Avoid dangers
• Avoid repair costs and downmes
• Increase the reliability and the lifespan of the product.
- 5 -
This manual must be read and applied by every person who is assigned to conduct work
using this device.
In addion to this operang instrucons the applicable regulaons on accident prevenon
and environmental protecon should be observed.
NOTE
Aer reading, keep the operang instrucons in a place accessible to every
operator. If you have any further quesons, please feel free to contact us.
1.3 Signs and symbols used
The following signs and symbols will be used in this manual, or on the product:
Symbol Explanaon
Read this operang manual
do not dispose of with household waste
EU conformity marking
®Registered trademark
use only indoors
Protecon class II
Intrinsically safe transformer
Direct current
Universal Recycling Symbol
- 6 -
1.4 Structure of the warnings
The warnings are structured as follows:
DANGER
Indicates an immediate dangerous situaon that can lead to serious or even
deadly injuries and/or that could seriously damage or even destroy the device.
WARNING
Indicates a potenally dangerous situaon that can lead to serious injuries
and/or damage to the device.
NOTE
Important and useful informaon on using this device.
1.5 Technical terms and abbreviaons used
Abbreviaon Meaning
°C Degrees Celsius, temperature
AC Alternate current
Hz Hertz, Frequency
mNN Meters above sea level, height
SN Serial number
VVolts, electrical voltage
W Was, electrical power
- 7 -
1.6 Intended use
This device was designed to expand the BTC-Tool Controller with digital in- and outputs.
WARNING
Intended use also includes
• following all indicaons of the operang instrucons and
• observance of inspecon and maintenance works.
Any other use or use beyond that is considered improper use. HS-Technik GmbH is not
liable for any damage resulng from this.
1.7 Improper use
DANGER
The use of this device for other purposes is not permied. Improper use or
incorrect accessories can lead to dangers with unforeseeable consequences.
We accept no liability for damage and malfuncons resulng from non-observance of
these operang instrucons and improper use.
1.8 Dues of the operator
The operator commied to only allow people who are familiar with the basic regulaons
on work safety and accident prevenon and who have been trained on how to use the
device at the workplace and to work with this device.
The safety awareness of the personnel while working will be reviewed at regular intervals.
- 8 -
1.9 Dues of personnel
Prior to its use all people who work with this device are obligated to inform themselves of
the applicable workplace safety and accident prevenon regulaons for this device and to
observe them.
1.10 Training of personnel
Only trained and instructed personnel should work with this device. The responsibilies of
the personnel must be clearly dened. Trainees may only work with this device under the
supervision of an experienced person.
1.11 Guarantee and liability
Guarantee and liability claims for personal injury and property damage are excluded, if
caused by one or more of the following:
• improper use
• failure to observe these operang instrucons
• improper installaon, commissioning, operaon and maintenance of the device
• Operang the device with defecve safety devices or improperly installed, or non-func-
oning safety and protecve devices
• Failure to observe the informaon in the operang instrucons regarding transport,
storage, assembly, commissioning, operaon and maintenance of the device
• unauthorised structural modicaons to the device
• improperly performed repairs
• catastrophes due to external inuences and acts of God
- 9 -
1.12 Copyright
These operating instructions are intended solely for the operator and its personnel.
They contain guidelines and information which may not be fully, or partially
• reproduced
• distributed or
• otherwise shared.
The copyright of these operating instructions is retained by HS-Technik GmbH.
Manufacturer’s address:
Im Martelacker 12
D-79588 Efringen-Kirchen
Telephone: +49 (0)7628 - 91 11-0
Fax: +49 (0)7628 - 91 11-90
E-mail: [email protected]
Internet: www.hs-technik.com
- 10 -
2 General safety informaon for power tools
DANGER
Read all the safety information, instructions, illustrations and technical data
which is provided with this device. Failure to follow the instructions below
may result in electric shock, fire and/or serious injury.
WARNING
This device was manufactured in according with current state-of-the-art
technology and recognised technological safety guidelines. However, its use
may jeopardise the health and life of the user or third pares, or risk damage
to other property.
WARNING
The workplace must only be used in accordance with its intended use and in
technically perfect condion.
NOTE
Keep all safety informaon and instrucons for the future.
NOTE
Only have your device repaired by qualied professional sta and only with
original replacement parts which are available at HS-Technik GmbH. This
ensures that the safety of the device is maintained.
Table des matières
Autres manuels HS-Technik Contrôleurs
