HP BladeSystem Dual NC370i - Multifunction Network... Mode d’emploi

SetLACState Utility

If a server contains more than one server adapter and at least one of those adapters is not connected, the

server is displayed as failed on some network management consoles and SNMP traps may be triggered.

The SetLACState utility allows the user to disable the Local Area Connection containing the unused

adapter and, as a result, the server does not display as failed and SNMP traps are avoided. The server

adapter identified by the Local Area Connection must be an HP-supported adapter.

The SetLACState utility is installed as part of the Network Configuration Utility (NCU) component pack for

the following operating systems:

•Windows Server 2008

•Windows Server 2008 x64

•Windows Server 2003

•Windows Server 2003 x64

•Windows 2000

Upon installation SetLACState.exe is copied into the %ProgramFiles%\HP\NCU directory.

This utility can be run from the command prompt, be used during RDP installations, or be added to the

[GuiRunOnce] section of unattend.txt for use in unattended installation. This utility cannot be used to

disable or enable teams of adapters.

Use the following format:.

SetLACState <Local Area Connection> [Enable | Disable] [/l<logfile>] [/? | /help]

Where:

•<Local Area Connection> is the name or ID of the LAN Connection (for example, Local Area

Connection or 1, 2, or 3).

IMPORTANT: If using this utility in the [GuiRunOnce] section of unattend.txt, you must specify

the ID of the Local Area Connection. Specifying the name of the Local Area Connection will

result in an error. "Local Area Connection" has an ID of 1; "Local Area Connection 2" has an

ID of 2, and so on. Local Area Connections that have been renamed no longer have an ID.

•[Disable] disables the specified Local Area Connection.

•[Enable] enables the specified Local Area Connection.

•[/l<logfile> allows the user to specify the location at which the logfile is saved. The default location

of the logfile is on the system drive, %SystemRoot%\cpqsystem\log\setlacstate.log.

Example:

To disable Local Area Connection 2, you can type one of the following:

•SetLACState 2 disable

•SetLACState "Local Area Connection 2" disable

Specifying Enable for a connection that is already enabled or Disable for a connection that is already

disabled will not generate an error.

December 2007 (Third Edition)

Part Number 355364-00C

Autres manuels pour BladeSystem Dual NC370i - Multifunction Network...

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Logiciel

HP 460C - Deskjet Color Inkjet Printer Manuel utilisateur

HP Compaq dc7900 Business PC Manuel utilisateur

HP ProCurve 1600M Manuel utilisateur

HP VL400 - Vectra - 64 MB RAM Manuel utilisateur

HP NC320m - PCI Express Gigabit Server Adapter Manuel utilisateur

HP HPE XP P9500 Guide de sécurité

HP N1200 - StorageWorks Network Storage Router Guide d'installation

HP J3111A - JetDirect 600N Network Card Mode d’emploi

HP NAS 1200s Mode d’emploi

HP OpenView Storage Area Manager (SAM) 3.1 Manuel utilisateur

HP C7791C - DesignJet 130 Color Inkjet Printer Guide de configuration

HP 8000 - Elite Convertible Minitower PC Manuel utilisateur

HP D6030A - NetServer - E50 Manuel utilisateur

HP Integrity rx5670 Manuel utilisateur

HP ProLiant DL320e Manuel utilisateur

HP BladeSystem Dual NC370i - Multifunction Network... Manuel utilisateur

HP BL680c - ProLiant - G5 Manuel utilisateur

HP 742n - Pavilion - 512 MB RAM Instructions d'installation et d'utilisation

HP Integrity BL860c Manuel utilisateur

HP Xw460c - ProLiant - Blade Workstation Manuel utilisateur

HP 4X - DDR InfiniBand Mezzanine HCA Mode d’emploi

HP D6030A - NetServer - E50 Manuel utilisateur

HP Bc1500 - BladeSystem - Blade PC Manuel utilisateur

HP T5720 - Compaq Thin Client Mode d’emploi

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur

Novell

Novell SP2 - S Mode d’emploi