HP ProLiant ML30 Gen10 Plus Manuel utilisateur

HPE ProLiant ML30 Gen10 Plus Server User GuideHPE ProLiant ML30 Gen10 Plus Server User Guide

Part Number: 30-CB359EAA-001

Published: March 2022

Edition: 1

HPE ProLiant ML30 Gen10 Plus ServerHPE ProLiant ML30 Gen10 Plus Server User Guide User Guide

AbstractAbstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise

assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy

levels, and are familiar with the weight and stability precautions for rack installations.

Part Number: 30-CB359EAA-001

Published: March 2022

Edition: 1

NoticesNotices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained

herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR

12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are

licensed to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is

not responsible for information outside the Hewlett Packard Enterprise website.

AcknowledgmentsAcknowledgments

Intel , Intel Virtual RAID on CPU (Intel VROC), Pentium , and Xeon are trademarks of Intel Corporation or its subsidiaries.

Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microsoft , Windows , and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

VMware is a registered trademark or trademark of VMware, Inc. and its subsidiaries in the United States and other jurisdictions.

All third-party marks are property of their respective owners.

® ® ® ® ®

® ® ®

Table of contentsTable of contents
Component identification
1 Front panel components
2 Front panel LED and button
2.1 Front panel LED power fault codes
3 Rear panel components
4 Rear panel LEDs
5 System board components
5.1 System maintenance switch descriptions
5.2 DIMM slot location
5.3 DIMM label identification
6 Drive bay numbering
7 HPE Basic Drive LED definitions
8 PCIe4 slot description
9 PCIe expansion slot definitions
10 HPE NS204i-p NVMe OS Boot Device components
11 HPE NS204i-p NVMe OS Boot Device LED definitions
12 Fan numbering
13 Fan mode behavior
14 Media device screws
15 Trusted Platform Module 2.0
15.1 Trusted Platform Module 2.0 guidelines
15.2 BitLocker recovery key/password retention guidelines
Operations
1 Power up the server
2 Power down the server
3 Remove the server from the rack
4 Remove the front bezel
5 Remove the access panel
6 Remove the air baffle
7 Remove the PCI blank retainer
8 Remove a media drive
9 Install the PCI blank retainer
10 Install the air baffle
11 Install the access panel
12 Install the front bezel
13 Install the server into the rack
Setup
1 Initial system installation
1.1 HPE Installation Service
1.2 Setting up the server
1.3 Setting up the server in tower mode
2 Operational requirements
2.1 Space and airflow requirements

2.1 Space and airflow requirements
2.2 Temperature requirements
2.3 Power requirements
2.4 Electrical grounding requirements
3 Rack warnings and cautions
4 Server warnings and cautions
5 Electrostatic discharge
Hardware options installation
1 Hardware option installation guidelines
2 Tower-to-rack conversion kit
2.1 Installing the tower-to-rack conversion kit
2.1.1 Install the rack rails and server tray
2.1.2 Install the server into the rack
3 Drive options
3.1 Drive installation guidelines
3.2 Installing a non-hot-plug LFF SATA drive
3.3 Installing a hot-plug LFF/SFF SAS or SATA drive
4 Power supply options
4.1 Hot-plug power supply calculations
4.2 Power supply warnings and cautions
4.3 Installing a Flexible Slot power supply
5 Redundant power supply enablement option
5.1 Installing the RPS enablement option
6 Media device options
6.1 SAS LTO tape drive option
6.1.1 Installing a SAS LTO tape drive
6.2 USB RDX backup system option
6.2.1 Installing a USB RDX docking station
6.3 Optical drive option
6.3.1 Installing an optical drive
7 PCI fan and air baffle options
7.1 Installing the PCI fan and air baffle
8 Storage controller options
8.1 Preparing the server for storage controller installation
8.2 Installing a type-p PCIe plug-in controller option
8.3 Storage controller guides
9 Energy pack options
9.1 HPE Smart Storage Battery
9.2 HPE Smart Storage Hybrid Capacitor
9.2.1 Minimum firmware versions
9.3 Installing an energy pack
10 Expansion card options
10.1 Installing an expansion card
11 Memory option
11.1 DIMM population information

11.1 DIMM population information
11.2 DIMM installation guidelines
11.3 Installing a DIMM
12 iLO-M.2-serial module option
12.1 iLO-M.2-serial module components
12.2 Installing the iLO-M.2-serial module
13 M.2 SSD options
13.1 Installing an M.2 SSD on the system board
13.2 Installing the NS204i-p Gen10 Plus Boot Device option
13.3 Installing the M.2 SATA SSD enablement option
13.4 Installing an M.2 SSD on the iLO-M.2-serial module
14 Internal USB device option
14.1 Installing an internal USB device
Cabling
1 Cabling guidelines
2 Storage cabling
2.1 Drive power cabling
2.2 Storage controller cabling
2.2.1 4 LFF non-hot-plug drive controller cabling
2.2.2 4 LFF / 8 SFF hot-plug drive controller cabling
2.3 Energy pack cabling
2.4 Storage controller backup power cabling
3 Media device cabling
3.1 LTO tape drive cabling
3.2 RDX backup system cabling
3.3 Optical drive cabling
4 M.2 SATA SSD add-in card cabling
5 Fan cabling
5.1 PCI fan cabling
5.2 System fan cabling
5.3 Heatsink fan cabling
6 Serial port cabling
7 Front I/O cabling
8 Power supply cabling
8.1 Non-hot-plug power supply cabling
8.2 Flexible Slot power supply cabling
Configuration and diagnostic utilities
Troubleshooting
1 NMI functionality
2 Troubleshooting resources
System battery replacement
1 System battery information
2 Removing and replacing the system battery
Safety, warranty, and regulatory information

1 Regulatory information
1.1 Notices for Eurasian Economic Union
1.2 Turkey RoHS material content declaration
1.3 Ukraine RoHS material content declaration
2 Warranty information
Specifications
1 Environmental specifications
2 Mechanical specifications
3 Power supply specifications
3.1 HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
3.2 HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency)
Websites
Support and other resources
1 Accessing Hewlett Packard Enterprise Support
2 Accessing updates
3 Customer self repair
4 Remote support
5 Documentation feedback

Component identificationComponent identification

This chapter describes the external and internal server features and components.

Component identification 7

Front panel componentsFront panel components

LFF drive modelsLFF drive models

ItemItem DescriptionDescription

1 Media bay 1

2 Media bay 2

3 USB 3.2 Gen1 port

4 USB 2.0 port

5 4 LFF hot-plug drives

6 4 LFF non-hot-plug drive cage

Media bay 1 supports a SATA optical drive, SAS LTO drive, or a USB RDX docking station.

Media bay 2 supports a SATA optical drive or a USB RDX docking station.

SFF drive modelSFF drive model

Front panel components 8

ItemItem DescriptionDescription

1 Media bay 1

2 Media bay 2

3 USB 3.2 Gen1 port

4 USB 2.0 port

5 8 SFF hot-plug drives

Media 1 supports a SATA optical drive, SAS LTO drive, or a USB RDX docking station.

Media 2 supports a SATA optical drive or a USB RDX docking station.

Front panel components 9

Front panel LED and buttonFront panel LED and button

ItemItem DescriptionDescription StatusStatus DefinitionDefinition

1 Health LED Solid green Normal

Flashing green iLO is rebooting

Flashing amber System degraded

Flashing red System critical

2 Power On/Standby button and

system power LED

Solid green System on

Flashing green Performing power-on sequence

Solid amber System in standby

Off No power present

When the two LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see Front panel

LED power fault codes.

If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to

review the system health status.

Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the

front I/O cable is disconnected.

Front panel LED and button 10

Table des matières

Autres manuels HP Serveur

HP ProLiant ML110 G6 Manuel

HP ML350 - ProLiant - G2 Manuel utilisateur

HP ProLiant ML350 Generation 4 Manuel

HP ProLiant ML100 Series Manuel utilisateur

HP PROLIANT DL160 G5 Instructions d'utilisation

HP 124708-001 - ProLiant Cluster - 1850 Manuel utilisateur

HP D6030A - NetServer - E50 Manuel utilisateur

HP BL35p - ProLiant - 2 GB RAM Manuel utilisateur

HP Integrity BL870c Instructions d'utilisation

HP D7171A - NetServer - LPr Manuel utilisateur

HP 850 Unified Wired-WLAN Appliance Manuel utilisateur

HP ProLiant DL380 Manuel utilisateur

HP ProLiant ML350 Gen9 Manuel

HP DL360 - ProLiant - Photon Manuel utilisateur

HP f10 Manuel utilisateur

HP DL120 - ProLiant - G5 Instructions d'utilisation

HP Cluster Platform Hardware Kits v2010 Instructions de montage

HP ProLiant Smart Array 256MB Instructions d'utilisation

HP ProLiant ML350p Gen8 Manuel utilisateur

HP DL385 - ProLiant - G5 Instructions d'utilisation

HP Virtual Connect FlexFabric-20/40 F8 Module Instructions d'utilisation

HP D7171A - NetServer - LPr Manuel utilisateur

HP ProLiant ML310e Generation 8 (Gen8) Instructions d'utilisation

HP D7171A - NetServer - LPr Manuel utilisateur

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel