HP ProLiant BL495c Generation 6 (G6) Manuel utilisateur

Processor Option

Installation Instructions

for HP ProLiant BL495c Generation 5 Server Blades

Overview

This document provides instructions for installing a processor and

a heatsink.

Kit contents

•Processor with installation tool

•Heatsink

•This document

Installing a processor

WARNING: To reduce the risk of personal injury from hot

surfaces, allow the drives and the internal system

components to cool before touching them.

CAUTION: To avoid damage to the system board:

•Do not touch the processor socket contacts.

•Always install the processor socket cover after

removing the processor from the socket.

•Do not tilt or slide the processor when lowering the

processor into the socket.

CAUTION: To avoid damage to the processor:

•Handle the processor only by the edges.

•Do not touch the bottom of the processor, especially

the contact area.

CAUTION: To prevent possible server malfunction and

damage to the equipment, multiprocessor configurations

must contain processors with the same part number.

CAUTION: The heatsink thermal interface media is not

reusable and must be replaced if the heatsink is removed

from the processor after it has been installed.

IMPORTANT: Processor socket 1 must be populated at all

times or the server blade does not function.

To install a processor:

1. Update the system ROM.

Locate and download the latest ROM version from the HP

website

(http://h18023.www1.hp.com/support/files/server/us/romfl

ash.html). Follow the instructions on the website to update the

system ROM.

2. Power down the server blade.

3. Remove the server blade.

4. Remove the access panel.

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 484106-001

uly 2008 (First Edition)

5. Remove the heatsink blank. Retain the heatsink blank for

future use.

CAUTION: The pins on the processor socket are very

fragile. Any damage to them may require replacing the

system board.

6. Remove the processor socket protective cover. Retain the cover

for future use.

CAUTION: Failure to completely open the processor

retaining latch prevents the processor from seating during

installation, leading to hardware damage.

7. Open the processor retaining latch and the processor socket

retaining bracket.

IMPORTANT: Be sure the processor remains inside the

processor installation tool.

8. If the processor has separated from the installation tool,

carefully re-insert the processor in the tool.

9. Align the processor installation tool with the socket and install

the processor.

CAUTION: The processor is designed to fit one way into

the socket. Use the alignment guides on the processor and

socket to properly align the processor with the socket.

10. Press down firmly until the processor installation tool clicks and

separates from the processor, and then remove the processor

installation tool.

11. Close the processor retaining bracket and the processor

retaining latch.

12. Remove the thermal interface protective cover from

the heatsink.

CAUTION: To avoid damage to the system board,

processor socket, and screws, do not overtighten the

heatsink screws. Use the wrench supplied with the system

to reduce the possibility of overtightening the screws.

13. Install the heatsink. Insert both screws, and then alternate

tightening until the heatsink is seated properly.

14. Install the access panel.

15. Install the server blade.

The installation is complete.

Autres manuels pour ProLiant BL495c Generation 6 (G6)

Table des matières

Autres manuels HP Serveur

HP NetServer LH3 Manuel utilisateur

HP T5145 - Thin Client - Tower Manuel utilisateur

HP ML330 - ProLiant - G3 Instructions d'utilisation et de sécurité

HP ProLiant DL380 G3 Instructions d'utilisation

HP 9000 rp7440 Instructions d'utilisation

HP ProLiant XL270d Gen9 Manuel

HP BL460c - ProLiant - G5 Instructions d'utilisation

HP T5125 - Compaq Thin Client Manuel d'utilisation et d'entretien

HP Integrity rx2660 Manuel utilisateur

HP Officejet LH 6000 Manuel utilisateur

HP ProLiant Moonshot Manuel utilisateur

HP ProLiant DL180 Gen9 Manuel utilisateur

HP NetServer AA 4000 Manuel utilisateur

HP ProLiant SL270s Generation 8 Instructions d'utilisation

HP P4800 G2 Manuel d'utilisation

HP ProLiant DL320 G6 Server Manuel utilisateur

HP BL10e - HP ProLiant - 512 MB RAM Instructions d'utilisation

HP D5970A - NetServer - LCII Manuel utilisateur

HP D7171A - NetServer - LPr Manuel utilisateur

HP ProLiant DL585 Manuel utilisateur

HP ProLiant ML310e Gen Instructions de montage

HP ProLiant XL230a Gen9 Manuel utilisateur

HP rp3440 Manuel utilisateur

HP ProLiant DL385 G5p Manuel

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel