HP ProLiant BL2x220c G7 Manuel utilisateur

HP ProLiant BL2x220c G7

Server Blade

Installation Instructions

Overview

To install a server blade, complete the following steps:

1. Install and configure an HP BladeSystem c-Class enclosure.

2. Install any server blade options.

3. Install interconnect modules in the enclosure.

4. Connect the interconnect modules to the network.

5. Install a server blade.

6. Complete the server blade configuration.

For definitions of the acronyms used in this document, refer to

"Acronyms and abbreviations" in the server blade user guide.

Installing an HP BladeSystem c-

Class enclosure

Before performing any server blade-specific procedures, install an

HP BladeSystem c-Class enclosure.

The most current documentation for server blades and other

HP BladeSystem components is available at the HP website

(http://www.hp.com/go/bladesystem/documentation).

Documentation is also available in the following locations:

•Documentation CD that ships with the enclosure

•HP Business Support Center website

(http://www.hp.com/support)

Installing server blade options

Before installing and initializing the server blade, install any server

blade options, such as additional memory, hard drives, or internal

USB devices.

Installing a server blade

CAUTION: To prevent improper cooling and thermal

damage, do not operate the server blade enclosure

unless all bays are populated with either a component

or a blank.

1. Remove the device bay blank.

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 614089-001

August 2010 (First Edition)

2. Remove the enclosure connector cover.

3. Install the server blade.

Connecting to the network

To connect the HP BladeSystem to a network, each enclosure must

be configured with network interconnect devices to manage signals

between the server blades and the external network.

Two types of interconnect modules are available for HP BladeSystem

c-Class enclosures: Pass-thru modules and switch modules. For more

information about interconnect module options, see the HP website

(http://www.hp.com/go/bladesystem/interconnects).

Installing interconnect modules

For specific steps to install interconnect modules, see the

documentation that ships with the interconnect module.

Interconnect bay numbering and device

mapping

Each server in the server blade has two embedded Ethernet NIC

ports and an embedded 4x QDR IB/Flex-10 10Gb port. The 4x

QDR IB/Flex-10 10Gb port is automatically configured to match the

switch module installed in bays 5 through 8 in the HP ProLiant

c7000 Enclosure. The HP ProLiant BL2x220c G7 Server Blade is

supported only in the HP ProLiant c7000 Enclosure.

To support network connections for specific signals, install an

interconnect module that supports the preferred mode of operation in

the bay that corresponds with the server node.

Server blade signal c7000 interconnect

bay Interconnect bay

labels

Server A NIC 1 1

Server A NIC 2 3

Server A 4x QDR IB

switch

5 & 6

Server A 10G Ethernet 5

Server B NIC 1 2

Server B NIC 2 4

Server B 4x QDR IB

switch

7 & 8

Server B 10G Ethernet 7

For detailed port mapping information, see the HP BladeSystem

enclosure installation poster or the HP BladeSystem enclosure setup

and installation guide on the HP website

(http://www.hp.com/go/bladesystem/documentation).

Completing the configuration

To complete the server blade and HP BladeSystem configuration, see

the overview card that ships with the enclosure.

For more information

For more detailed setup and configuration information as well as

regulatory, safety, and environmental notices, see the HP ProLiant

BL2x220c G7 Server Blade User Guide on the HP website

(http://www.hp.com/go/bladesystem/documentation).

Table des matières

Autres manuels HP Serveur

HP BL465c - ProLiant - 2 GB RAM Manuel utilisateur

HP Integrity BL870c Instructions d'utilisation

HP ML570 - ProLiant - G2 Instructions d'utilisation

HP gt7720 - Thin Client Manuel utilisateur

HP LH3000r - NetServer - 128 MB RAM Manuel utilisateur

HP D7171A - NetServer - LPr Manuel utilisateur

HP t5740e - Thin Client Instructions d'utilisation

HP BL685c - ProLiant - 4 GB RAM Manuel utilisateur

HP ProLiant SL250s Gen8 Manuel

HP ProLiant ML310 Generation 5p Instructions d'utilisation et de sécurité

HP Compaq 6720t Instructions d'utilisation

HP ProLiant ML100 Series Manuel utilisateur

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Manuel utilisateur

HP ProLiant DL360p G8 Instructions de montage

HP ProLiant SL4540 Manuel

HP BL465c - ProLiant - 2 GB RAM Instructions d'utilisation

HP T5720 - Compaq Thin Client Fiche technique

HP ProLiant SL165s G7 Manuel utilisateur

HP DL360 - ProLiant - Photon Instructions d'utilisation et de sécurité

HP t5515 - Thin Client Manuel technique

HP 2G Manuel technique

HP ProLiant DL560 Manuel utilisateur

HP TruCluster Server V5.1B-1 Manuel utilisateur

HP ProLiant DL320 Generation 3 Manuel

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel