HP Integrity rx2660 Manuel utilisateur

RX2660BOOT DISK ENTRY

Effective:

12/18/18

Revision:

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 1 of 11

Adding a Boot Disk Entry to an

HP Integrity rx2660

Necessary Items

•Terminal Emulator application (e.g., PuTTY).

•Hard drive to be mounted.

Overview

In order to boot an rx2660 to a “new” disk, it is necessary to add an entry to the list of devices the rx2660 will try

to boot from (i.e., add a boot entry).

•Connect to the Management Processor (MP).

•Power on the rx2660.

•From the MP, connect to the Console Terminal (CO) and watch the Power On Self Test (POST) and early

boot.

•When the Extensible Firmware Interface (EFI) Menu appears, go to Add Boot Option and add the Boot

Option for the disk.

•Still in the EFI Menu, go to Change Boot Order and move your disk to the top of the list.

•Boot from the disk.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 2 of 11

Details

In this example, a network connection is made to the Management Processor PDQVCA, which is in an rx2660

that plays the role of PDQVSA in the PDQ system.

1. With the rx2660 initially powered OFF (but still plugged in), insert the new hard drive into an available

slot.

2. Launch a PuTTY session and select either the Telnet or SSH radio button.

3. Connect to the MP and enter the Command Menu (CM). From any running workstation.

PDQVS1$ ssh "[email protected]0.226"

Admin's password:

– OR –

PDQVS1$ telnet "[email protected]"

Admin's password:

NOTE: When using SSH, nothing appears in response to keystrokes, not even dots or asterisks.

Authentication successful.

Hewlett-Packard Integrity Integrated Lights-Out 2

MP Host Name: pdqvca

Revision F.02.26

MP MAIN MENU:

CO: Console

VFP: Virtual Front Panel

CM: Command Menu

SMCLP: Server Management Command Line Protocol

CL: Console Log

SL: Show Event Logs

HE: Main Help Menu

X: Exit Connection

[pdqvca] MP> CM

4. Power up the main part of the rx2660.

[pdqvca] MP:CM> pc -on

PC -on

System will be powered on.

Confirm? (Y/[N]): y

-> System is being powered on.

-> Command successful.

[pdqvca] MP:CM>

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 3 of 11

5. Return to the Main Menu (<Ctrl-b>) and go to the Console (CO) to monitor the early boot. This may take

a little while.

MP MAIN MENU:

CO: Console

VFP: Virtual Front Panel

CM: Command Menu

SMCLP: Server Management Command Line Protocol

CL: Console Log

SL: Show Event Logs

HE: Main Help Menu

X: Exit Connection

[pdqvca] MP> co

[Use Ctrl-B or ESC-( to return to MP main menu.]

- - - - - - - - - - Prior Console Output - - - - - - - - - -

* POST-MISERnet startup at 21-NOV-2018 10:45:56.58 *

*******************************************************************

SYSTEM job terminated at NOVEMBER 21, 2018 10:45 AM

Accounting information:

Buffered I/O count: 9029 Peak working set size: 9824

Direct I/O count: 3561 Peak virtual size: 250112

Page faults: 22792 Mounted volumes: 0

Charged CPU time: 0 00:00:02.49 Elapsed time: 0 00:00:31.53

- - - - - - - - - - - - Live Console - - - - - - - - - - - -

***********************************************************

* ROM Version : 04.32

* ROM Date : 05/21/2013

* BMC Version : 05.26

***********************************************************

0 0 0x0015B2 0x0000000018719204 boot time event

…

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 4 of 11

6. When the EFI Boot Manager Menu appears, press the Down arrow key to move the cursor to Boot

Configuration, and then press <Enter>. This must be done quickly as there is about fifteen seconds to

respond.

NOTE: If more than one bootable disk is inserted, then multiple entries will appear instead of the one (two-line)

entry seen in this example. The first entry will be for the bootable disk in the lowest-numbered slot.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 5 of 11

7. In the dialog box, navigate to Add Boot Entry and press <Enter>. A message will display while the

machine searches for a bootable device (this should take less than thirty seconds).

8. Navigate to the proper device (typically the top entry) and press <Enter>.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 6 of 11

9. There is no option on this step, you must select EFI. Press <Enter> again and wait for the screen to

refresh.

10. Navigate to the VMS line and press <Enter>.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 7 of 11

11. Navigate to the line that reads VMS_LOADER.EFI and press <Enter>.

NOTE: It may be necessary to move the cursor past the end of the page.

12. Enter a description for the hard drive (e.g., PDQVSA).

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 8 of 11

13. At the next prompt, leave the Load Option blank and press <Enter>. Type <y> at the Save changes to

NVRAM? prompt.

14. When the screen refreshes, navigate to Edit OS Boot Order and press <Enter>.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 9 of 11

15. Highlight PDQVSA and press <Enter>, the word will turn yellow. Press the Up arrow until PDQVSA is the

topmost entry. Press <Enter> again to lock it into its new position.

16. Press <Enter> and the color will change back.

17. Press <Esc> twice to return to the Boot Menu. The new drive will now display at the top of the list.

RX2660BOOT DISK ENTRY

All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written

permission of HSQ Technology is prohibited.

PAGE: 10 of 11

18. Press <Enter>, this will begin rebooting the machine.

19. After the machine has rebooted, press <Ctrl-b> to return to the Main Menu.

Autres manuels pour Integrity rx2660

Table des matières

Autres manuels HP Serveur

HP Sa3110 - VPN Server Appliance Manuel d'exploitation et d'entretien

HP Proliant DL580 Instructions d'utilisation et de sécurité

HP Integrity BL890c - i2 Server Instructions d'utilisation

HP Cluster Platform Introduction v2010 Manuel utilisateur

HP X510 Manuel utilisateur

HP ProLiant ML110 G5 Instructions d'utilisation

HP Sa3110 - VPN Server Appliance Manuel du propriétaire

HP D7171A - NetServer - LPr Manuel utilisateur

HP DL590/64 Manuel utilisateur

HP ProLiant DL180 G Instructions d'utilisation

HP DesignJet T730 Manuel utilisateur

HP 3000 99x Family Manuel utilisateur

HP Rp3440-4 - 9000 - 0 MB RAM Manuel du propriétaire

HP ProLiant DL180 G Instructions d'utilisation

HP t5550 - Thin Client Manuel utilisateur

HP ProLiant BL20p Instructions d'utilisation

HP ProLiant ML100 Series Manuel utilisateur

HP Computer Parts Manuel utilisateur

HP Integrity rx2600 Manuel utilisateur

HP D5970A - NetServer - LCII Manuel utilisateur

HP ProLiant N40L Manuel utilisateur

HP cc2300 Manuel du propriétaire

HP rp4410 Manuel utilisateur

HP ProLiant SL270s Generation 8 Instructions d'utilisation

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel