HP BladeSystem bc2200 - Blade PC Instructions de montage

Product End-of-Life Disassembly Instructions

Product Category: Servers

Marketing Name / Model

[List multiple models if applicable.]

Name / Model #1 HP BladeSystem bc2200 Blade PC

Name / Model #2 HP bc2200 Blade PC

Name / Model #3

Name / Model #4

Name / Model #5

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm 1

Batteries All types including standard alkaline and lithium coin

or button style batteries 1

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

screwdriver T15

screwdriver 451N

Description #4

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Blade Card(BC)

1) Remove the Blade cards:

a) Press the Blade card handle down. (see Figure 1 as below)

b) Catch the handle and pull out the blade card(see Figure 2 as below)

2) Disassembly the Blade card

a) Remove the screws on Heat sink and pick up the heat sink from the blade card (see Figure 3&4 as below)

b) Push the clip back to the horizontal direction that holds the battery in place, and then remove the battery from the

blade card (see Figure 5 as below)

c) Remove the CPU from the blade card (see Figure 6&7 as below)

d) Pull the metal handle of the RAM slot to two side,and then take up the RAM from the blade card

(seeFigure8&9 as below)

e) Remove the HDD from the BC(see Figure 10&11 as below)

f) Remove the power light(see Figure 12 as below)

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Figure 1 Press the Blade card handle down Figure 2 pull out the blade card

Figure 3 Remove the screws of the heat sink Figure 4 Remove the heat sink from the BC

Figure 5 Remove the battery Figure 6 Remove the CPU

Figure 7 Take up the CPU from the BC Figure 8 Pull the metal to two side

Figure 9 Take up the RAM Figure 10 Remove the screws that holding the HDD

Figure 11 Pull out the HDD Figure 12 Remove the screw hold the power light

Table des matières

Autres manuels HP Serveur

HP D5970A - NetServer - LCII Manuel utilisateur

HP AlphaServer ES47 Guide de démarrage rapide

HP BL460c - ProLiant - G5 Manuel utilisateur

HP Compaq t5515 Manuel utilisateur

HP ProLiant DL380 Gen9 Manuel utilisateur

HP Integrity rx1620 Guide de démarrage rapide

HP t5300 - Thin Client Manuel utilisateur

HP ProLiant BL620c Generation 7 Instructions d'utilisation

HP ProLiant ML350 G5 Instructions d'utilisation

HP D7171A - NetServer - LPr Manuel utilisateur

HP ProLiant DL360 Generation9 Instructions d'utilisation

HP Sa3110 - VPN Server Appliance Manuel utilisateur

HP HPE ProLiant DL365 Gen10 Plus Server Manuel

HP D7171A - NetServer - LPr Mode d’emploi

HP HPE ProLiant DL325 Manuel

HP BL460c - ProLiant - G5 Manuel utilisateur

HP T5735 - Compaq Thin Client Manuel de service

HP LC2000r - NetServer - 128 MB RAM Manuel utilisateur

HP ProLiant ML310e Gen Manuel

HP ProLiant DL380 Guide de référence rapide

HP ProLiant SL160s Manuel utilisateur

HP SimpliVity OmniCube CN-3400 Manuel du produit

HP Cluster Platform Hardware Kits v2010 Manuel utilisateur

HP 3000 - 37XE System Manuel de service

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel