HP A4500A - VMEbus Single Board Computer 744... Manuel utilisateur

hp rp2400 Series of Servers

Basic Cable Connections

Version 2.0

Manufacturing Part Number: rp24xx_basic_cable-en

January 2004

U.S.A.

Legal Notices

The information contained herein is subject to change without notice. The only warranties for HP products

and services are set forth in the express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Printed in the U.S.A.

Reproduction, adaptation, or translation of this document without prior written permission is prohibited,

except as allowed under the copyright laws.

Related Documents. For online access to technical support information, self-solve tools, online assistance,

community forums of IT experts, broad multivendor knowledge base, and monitoring and diagnostic tools, go

to http://www.hp.com/support.

IMPORTANT The latest versions of these documents, and any updates to these documents, are posted under

the appropriate server at http://docs.hp.com.

HP Encourages Your Comments

HP encourages your comments concerning this document. We are truly committed to providing

documentation that meets your needs.

Please send any comments by contacting us at http://docs.hp.com/assistance/index.html.

Please include document title, manufacturing part number, and any comment, error found, or suggestion for

improvement you have concerning this document.

Contents

1. HP rp2400 Series of Servers -

Basic Cable Connections

Record System Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Controls and indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Server External Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting PDU(s) to Dedicated AC Input Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Console Connection and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

rp24xx Server RS-232 System Local Console Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Console Configuration (VT100 mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Contents

Figures

Figure 1-1. Serial Number Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Figure 1-2. Controls and LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 1-3. External Connections to the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 1-4. Console Connection and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 1-5. Console/Remote-Modem/UPS Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figures

Chapter 1 7

1HP rp2400 Series of Servers -

Basic Cable Connections

To make the basic cable connections for the rp24xx Server, refer to the illustrations and instructions below.

For detailed installation, maintenance, and technical information, refer to the rp24xx Hardware Manual and

other documentation (search on rp2400) at http://docs.hp.com.

Record System Serial Number

Before proceeding further with this installation, locate and record the system serial number and store in a

safe place. The serial number will be required for warranty and service work.

The serial number is located in two places as shown in the graphic below:

Figure 1-1 Serial Number Locations

100-240V~, 600W

6.0-2.6A, 50-60Hz

Ultra 2 W ide SCSI

Path: 0/0/1/ 0

Narro w S ingle Ended SCSI

Path: 0/0/2/ 0

GSP Reset TO C

10/100BASE- T

Path: 0/0/0/ 0

10BASE- T

LAN Consol e

Console/

UPS Por t

Path: 0/2/0 Path: 0/4/0

Path: 0/6/2 Path: 0/6/ 0

wi n

urbo wi n

urbo

ccrr012

Serial Number Tag

Pull-Out Tab

HP rp2400 Series of Servers - Basic Cable Connections

Front Panel Controls and indicators

Chapter 1

Front Panel Controls and indicators

The following section describes the controls and LED indicators at the front of the rp24xx Server as shown in

the following graphic:

Figure 1-2 Controls and LED Indicators

1. (Green) RUN LED - When lit, indicates that the system is powered-up.

2. (Amber) Attention (ATTN) LED - When lit, indicates that a condition exists that requires operator

attention and assistance from HP Support.

3. (Red) Fault LED - When lit, indicates that a condition exists that requires immediate operator action.

4. (Amber) Remote LED - When lit, indicates that the remote ports are active.

5. (Green) Power LED - When lit, indicates that the system has DC power enabled.

NOTE For technical support please call your local support hotline or contact HP at

http://www.hp.com/support.

Server External Connections

External devices are interfaced with the server by means of specific connectors located on the rear bulkhead.

Exterior connections to the server include ports for:

• Small Computer System Interface (SCSI) devices

•SystemConsole

• Local Area Network (LAN) Console

•LANs

•PowerCord

ccrr018

Run Attn.

Fault Remote Power

HP rp2400 Series of Servers - Basic Cable Connections

Front Panel Controls and indicators

Chapter 1 9

The graphic shown below illustrates locations of the external connections to the server.

Figure 1-3 External Connections to the Server

Connect External Small Computer System Interface (SCSI) Devices

Connect external SCSI devices to the single ended SCSI bus (labeled: Narrow Single-Ended SCSI Path:

0/0/2/0) on the system card or to the Ultra 2 SCSI bus (labeled: Ultra 2 SCSI Path: 0/0/1/0).

Ensure that all devices on the SCSI bus have a unique address and the last device is terminated. Refer to the

documentation accompanying each device to learn how to set addresses and where to place terminators.

Connect a System Console

NOTE For more information on console configuration, refer to the rp24xx Hardware Manual (search

on rp2400) at http://docs.hp.com.

•Using the ASCII Terminal as a System Console. If an ASCII terminal is to be used as a console/UPS

port, make sure that the keyboard is connected and a power cable is available.

•Using a Secure Web Console PCI card as a System Console. If the Secure Web Console PCI card is

to be used as a system console, first configure the Guardian Service Processor (GSP). For more

information on GSP configuration, refer to the rp24xx Hardware Manual (search on rp2400) at

http://docs.hp.com.

Then, connect an RJ45 LAN cable to the Secure Web Console PCI card installed in an I/O card slot on the

back of the server.

100-240V~, 600W

6.0-2.6A, 50-60Hz

Ultra 2 W ide SCSI

Path: 0/0/1/ 0

Narro w S ingle Ended SCSI

Path: 0/0/2/ 0

GSP Reset TO C

10/100BASE- T

Path: 0/0/0/ 0

10BASE- T

LAN Consol e

Console/

UPS Por t

Path: 0/2/0 Path: 0/4/0

Path: 0/6/2 Path: 0/6/0

wi n

urbo wi n

urbo

ccrr008

100-240V~, 600W win Path: 0/2/0 win Path: 0/4/0

6.0-2.6A, 50-60Hz urbo urbo

On/Off Console/

Switch GSP Reset TOC UPS Port

Path: 0/6/2 Path: 0/6/0

Ultra2 Wide SCSI Narrow Single

Path: 0/0/1/0 Ended SCSI

Path: 0/0/2/0 10/100BASE-T 10BASE-T Pull-Out

Path: 0/0/0/0 LAN Console Tab

HP rp2400 Series of Servers - Basic Cable Connections

Connecting PDU(s) to Dedicated AC Input Receptacles

Chapter 1

NOTE The Web Console has a default Internet Protocol (IP) address of 192.0.0.192 for rp2400

and rp2450 servers, and 127.0.0.1 for rp2430 and rp2470 servers. Make sure that no

other device, including other rp24xx servers, has this address before connecting the server

to your LAN.

•Using the LAN Console as a System Console. If a LAN Console is to be used as a system console, first

configure the Guardian Service Processor (GSP). For more information on GSP configuration, refer to the

rp24xx Hardware Manual (search on rp2400) at http://docs.hp.com.

Then, connect it to the system with an RJ45 LAN cable to the RJ45 connector labeled 10BASE-T LAN

Console connection on the back of the server.

Connect the Core Local Area Network (LAN)

Connect the 10/100BASE-T Core LAN on the system board to the LAN with an RJ45 LAN cable. Connect the

RJ45 LAN cable to the server by attaching it to the RJ45 connector labeled 10/100 Base-T Path: 0/0/0/0.

Connect Power Cords

Connect the power cord that is provided with the system to the server. For stand-alone servers, the power cord

will be localized to each country’s power application. If an HP Uninterruptible Power Supply (UPS) is the

power source, use the power cord provided with the UPS.

Connect power cords to all external devices at this time with the either the localized power cord, cabinet

Power Distribution Unit (PDU) power cord, or the UPS power cord.

For cabinet-mounted servers, the server power cord connects to the PDU in the cabinet.

Connecting PDU(s) to Dedicated AC Input Receptacles

In non-HA installations, each PDU should be plugged into a separate dedicated 20amp AC receptacle.

NOTE If the rp24xx server is installed as a standalone, the specialty convenience cord (provided) may

be plugged into either wall outlets with appropriately sized breakers, or a plug strip capable of

providing the total current required for your server’s configuration.

Current requirements vary with input voltage, server configuration, and number of power

supplies installed. Refer to “System Site Preparation” in the rp24xx Hardware Manual at

http://docs.hp.com.

Autres manuels pour A4500A - VMEbus Single Board Computer 744...

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Serveur

HP ProLiant DL585 G5 Manuel d'installation et d'exploitation

HP ProLiant ML10 v2 Manuel utilisateur

HP Rx2620-2 - Integrity - 0 MB RAM Manuel utilisateur

HP EH920A - StorageWorks Ultrium 1760 Tape... Manuel utilisateur

HP Integrity BL860c Mode d’emploi

HP ProLiant DL585 G7 Manuel utilisateur

HP D7171A - NetServer - LPr Manuel d'exploitation et d'entretien

HP DL385 - ProLiant - G5 Instructions d'utilisation

HP D5970A - NetServer - LCII Manuel utilisateur

HP BL460c - ProLiant - G5 Instructions d'utilisation

HP ML350 - ProLiant - G2 Instructions d'utilisation

HP AlphaServer ES47 Manuel de service

HP T5530 - Compaq Thin Client Instructions d'utilisation

HP ProLiant DL380 Gen10 Plus Instructions d'installation

HP ProLiant ML100 Series Manuel utilisateur

HP vc4815 - Thin Client Manuel utilisateur

HP D7171A - NetServer - LPr Manuel utilisateur

HP vc4815 - Thin Client Manuel utilisateur

HP ProLiant ML350 Generation 5 (G5) Instructions d'utilisation

HP ProLiant DL385p Gen8 Manuel utilisateur

HP 9000 V2200 Manuel d'installation et d'exploitation

HP DL385 - ProLiant - G5 Manuel utilisateur

HP D5970A - NetServer - LCII Manuel utilisateur

HP VT5900-K Manuel utilisateur

Manuels Serveur populaires d'autres marques

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Dell

Dell PowerEdge HS5610 Manuel