HP V191 Instructions d'installation
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP V191 18.5-inch LED Backlit LCD Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity of items included
in product
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
3
Batteries
All types including standard alkaline and
lithium coin or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display
backlights, scanner lamps, switches,
batteries
0
Liquid Crystal Displays (LCD) with a
surface greater than 100 sq cm
Includes background illuminated displays
with gas discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing
PCB/PCT)
0
Electrolytic Capacitors / Condensers
measuring greater than 2.5 cm in diameter
or height
2
External electrical cables and cords
LV1911 V191 : 2
W1971a/W1972a/W1952a:3
Gas Discharge Lamps
0
Plastics containing Brominated Flame
Retardants weighing > 25 grams (not
including PCBs or PCAs already listed as a
separate item above)
0
Components and parts containing toner
Include the cartridges, print heads, tubes,
0
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
and ink, including liquids, semi-liquids
(gel/paste) and toner
vent chambers, and service stations.
Components and waste containing
asbestos
0
Components, parts and materials
containing refractory ceramic fibers
0
Components, parts and materials
containing radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Screw driver of "+" type
200mm
Description #2 Hexagonal nut screw driver for DVI and D-SUB connector
200mm
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Dismantle the screws of stand，get down the stand
2. Dismantle the cover of monitor
3. Dismantle the button，pull out the pin of KEPC board ,get down the KEPC board
4. Dismantle mainframe
5. Dismantle BEZEL
6. Dismantle the screws of PANEL
7. Pull out the PIN of lamp
8. Pull out the PIN of LVDS cable，separate the mainframe and PANEL
9. Dismantle the power board screws
10. Dismantle the VGA/DVI screws
11. First: Tear off the adhesive tape;
12. Second: Pull out the connector PIN which connect PWPC and main board;
13. Third: Take off both boards
14. Pull out the pin of KEPC cable
15.
16.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Pls. refer the attached:
1
HP 185 Disassembly Process
2
External ElectricCables DissectingProcess
1.RemoveCable From Display Head. 2.Dissecting to Complete.
Power Cable
D-SUB &DVI Cable
AUDIO Cable
3
Remove Stand Base From Display
3
41
2
1.Take Screw(*5) from RearCover. 2. Demount Stand & RemoveStand Base Form
Display.
5
4
Remove Rear Cover From DisplayHead
1.Both Hands Upwardly Pull Up.
3. Toward the arrowhead , take the
RearCoverfrom the Front Cover. 4. RemoveRear Cover.
3
1
2
2.Turn over Display Head.
5
Remove KEPC board From Front Cover
1. Takethe KEPC assembly from the Front
Cover. 2.Remove Connectoroff from KEPC board
and disassemble KEPC assembly .
6
Remove Mainframe &Panel
1. Remove Connector off from Power
board & Panel. 2.Remove the Conductive Tape from
the Mainframe.
3.RemoveMainframe & Panel. 4.Removethe connecting wire
7
Remove Front Cover &Panel
1.Turn over Panel, and remove the Front
Coveroff from Panel.
2. Dissecting to complete.
3. Demount BRACKET-L& BRACKET-R Form
LNT panel.
Direct at the LNT panel Modle
8
Take Screw off From Mainframe Assembly
1.Take Screw(*4or 2) from Mainframe.
3. Take Screw(*6) from Power Bd & Main Bd .
2.Tearoff Mylar form mainframe
Autres manuels pour V191
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HP Moniteur
HP
HP J Class Manuel utilisateur
HP
HP LP2065 - 20.1" LCD Monitor Manuel utilisateur
HP
HP 27y Instructions d'installation
HP
HP 1280 - Ultra VGA - 17" CRT Display Manuel utilisateur
HP
HP E24 G4 Fiche technique
HP
HP P930 Manuel utilisateur
HP
HP EF224A4 Manuel utilisateur
HP
HP LP2475w - 24" LCD Monitor Fiche technique
HP
HP V223 Instructions d'utilisation
HP
HP Compaq LE1852ms Manuel utilisateur
HP
HP D2832A Manuel utilisateur
HP
HP Z22i Manuel utilisateur
HP
HP X27q Manuel
HP
HP P274 Instructions d'installation
HP
HP Compaq LA2205wg Instructions d'utilisation
HP
HP FP1707 Manuel utilisateur
HP
HP LP2480zx - DreamColor - 24" LCD Monitor Manuel utilisateur
HP
HP D2847W Manuel utilisateur
HP
HP L1706 Instructions d'utilisation
HP
HP Pavilion M50 Manuel utilisateur
