HP Pavilion zd7000 - Notebook PC Mode d’emploi

Modem Command Guidelines

HP Notebook Series

Document Part Number: 316740-002

May 2003

This document provides instructions for selecting, accessing, and

using the AT command set supported by the modem in your

notebook.

316740-002.book Page i Thursday, May 1, 2003 1:40 PM

HP shall not be liable for technical or editorial errors or omissions

contained herein or for incidental or consequential damages in connection

with the furnishing, performance, or use of this material. The information

in this document is provided “as is” without warranty of any kind, and is

subject to change without notice. The warranties for HP products are set

forth in the express limited warranty statements accompanying such

products. Nothing herein should be construed as constituting an additional

warranty.

Modem Command Guidelines

HP Notebook Series

Second Edition May 2003

First Edition April 2002

Document Part Number: 316740-002

316740-002.book Page iii Thursday, May 1, 2003 1:40 PM

Modem Command Guidelines iii

Contents

Modem Command Guidelines

Accessing HyperTerminal . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Selecting a Command Set . . . . . . . . . . . . . . . . . . . . . . . 1

Identifying Your Modem. . . . . . . . . . . . . . . . . . . . . . . . 2

Accessing Your Command Set . . . . . . . . . . . . . . . . . . . 2

Using Commands on the Notebook . . . . . . . . . . . . . . . . . . . 2

Entering a Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Editing a Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Executing a Command. . . . . . . . . . . . . . . . . . . . . . . . . . 3

Repeating a Command. . . . . . . . . . . . . . . . . . . . . . . . . . 3

Omitting a Parameter in a Command Line . . . . . . . . . . 3

Setting the Result Code Format. . . . . . . . . . . . . . . . . . . 4

Setting Local Character Echo . . . . . . . . . . . . . . . . . . . . 4

Using Online Mode and Online Command Mode . . . . . . . . 5

Switching to Online Command Mode . . . . . . . . . . . . . . 5

Switching to Online Mode. . . . . . . . . . . . . . . . . . . . . . . 5

Creating a Command Mode Shortcut Icon . . . . . . . . . . 6

316740-002.book Page iii Thursday, May 1, 2003 1:40 PM

Modem Command Guidelines 1

Modem Command Guidelines

This guide provides instructions for selecting, accessing, and

using the AT command set supported by the modem in your

notebook.

For help with specific modem problems, go to the modem

manufacturer’s Web site, or refer to the Worldwide Telephone

Numbers booklet to contact a HP Customer Care Center.

Accessing HyperTerminal

Modem commands can be entered in HyperTerminal, which is

included with all Microsoft Windows operating systems.

To access HyperTerminal:

■In Windows XP Professional, select Start > All Programs >

Accessories > Communications > HyperTerminal.

■In Windows 2000 Professional, select Start > Programs >

Accessories > Communications > HyperTerminal.

Selecting a Command Set

Command sets are modem-specific. To use modem commands

successfully, you must use the command set supported by the

modem in your notebook.

316740-002.book Page 1 Thursday, May 1, 2003 1:40 PM

2 Modem Command Guidelines

Modem Command Guidelines

Identifying Your Modem

To display the model name of the modem in your notebook:

1. Select Start.

2. Right-click My Computer > Properties > Hardware tab >

Device Manager button.

3. Double-click Modems. (An icon and name for your modem

is displayed.)

4. Double-click the modem name icon. (The modem model

name is displayed.)

Accessing Your Command Set

After you identify the model name of your notebook, refer to

the modem manufacturer’s Web site to obtain an updated

command set.

Using Commands on the Notebook

Entering a Command

When entering modem commands on the notebook:

■You must start every AT command line (except the A/ and

+++ commands) with the attention (AT) code characters. If

you do not begin the command line with the attention (AT)

code characters, the modem will not execute the command.

■You must type the AT prefix in the same case (AT or at, not At

or aT).

■You may type commands following the AT prefix in all

uppercase, all lowercase, or any combination of uppercase

and lowercase letters.

■You may enter telephone numbers with or without

punctuation, for example, (123) 456-7890 or 1234567890.

316740-002.book Page 2 Thursday, May 1, 2003 1:40 PM

Modem Command Guidelines

Modem Command Guidelines 3

Editing a Command

If you make an error while typing a command, backspace over the

error, then retype. You cannot backspace over the AT prefix

because it is interpreted immediately after it is typed.

Executing a Command

To execute a command line, press enter. (Pressing enter instructs

the modem to process the command line.)

Repeating a Command

To repeat the last command line issued, enter the A/ command.

When repeating the A/ command, it is not necessary to enter the

AT prefix or press enter, because issuing the A/ command repeats

the AT prefix and enter function.

The last command entered remains in the command buffer until

the modem is reset or power to the modem is turned off. Both

actions clear the buffer. The A/ command is invalid while the

buffer is clear.

Omitting a Parameter in a Command Line

If you enter a command that normally includes a numeric

parameter, such as ATHn, without entering the numeric parameter,

the value of the numeric parameter is assumed to be the default

parameter.

For example, the Hn (hang-up) command can have a numeric

parameter of zero (H0), which is the default, or of one (H1). If

neither parameter is entered, ATH plus enter is the equivalent of

ATH0 plus enter.

This rule does not apply to the D(dial) command.

316740-002.book Page 3 Thursday, May 1, 2003 1:40 PM

4 Modem Command Guidelines

Modem Command Guidelines

Setting the Result Code Format

A result code is the response of the modem to a command. It may

be issued in either of two formats: words (the long form, also

known as verbose) or numeric characters (the short form,

represented by digits).

The result code format is set using the Vn command:

■Use V1 for words (default).

■Use V0 for numeric characters.

Setting Local Character Echo

Local echo is a process that transmits received data back to the

sending station and allows you to see what data was received.

If your typing is not displayed on the screen, local echo is

turned off.

Local echo preferences are set using the En command:

■Use EO for no local echo.

■Use E1 to enable local echo.

316740-002.book Page 4 Thursday, May 1, 2003 1:40 PM

Modem Command Guidelines

Modem Command Guidelines 5

Using Online Mode and

Online Command Mode

Online mode is used for data transfer; online command mode is

used for entering commands.

Switching to Online Command Mode

To escape from online mode and enter online command mode,

press and hold shift as you type +++.

When you have correctly entered this escape command:

■An OK result code is displayed.

■The established connection is maintained, but input is

interpreted locally and not transmitted to the remote

connection.

Switching to Online Mode

To escape from online command mode and enter online mode,

use either of the following methods:

■Enter the ATO (letter “O”) command.

■Terminate the connection with the ATH0 (digit “0”) command.

316740-002.book Page 5 Thursday, May 1, 2003 1:40 PM

6 Modem Command Guidelines

Modem Command Guidelines

Creating a Command Mode Shortcut Icon

You can create a Windows shortcut icon for accessing

HyperTerminal in online command mode. To place a Command

shortcut icon on the Windows desktop:

1. Create a Command icon in HyperTerminal.

✎To access HyperTerminal:

■In Windows XP Professional, select Start > All

Programs > Accessories > Communications >

HyperTerminal.

■In Windows 2000 Professional, select Start > Programs >

Accessories > Communications > HyperTerminal.

a. In the Name field, type:

Command

b. Select OK. (The Connect To dialog box is displayed.)

c. In the Connect Using field, select the COM port used by

your modem.

✎To identify the COM port used by your modem:

■In Windows XP Professional, select Start > Control

Panel > Printers and Other Hardware icon > Phone and

Modem Options icon > Modems tab.

■In Windows 2000 Professional, select Start > Settings >

Control Panel > Phone and Modem Options > Modems.

d. Select OK. (The Port Settings tab is displayed.)

e. Select OK. (The command mode screen is displayed with

a flashing cursor in the upper left corner. The modem can

now receive a command and respond to the command

with a result code.)

316740-002.book Page 6 Thursday, May 1, 2003 1:40 PM

Modem Command Guidelines

Modem Command Guidelines 7

f. Select File > Save. (A Command icon is created, but is

not visible until you exit HyperTerminal.)

g. To exit HyperTerminal, select File > Exit.

2. To access the Command icon:

h. In Windows XP Professional, select Start > All

Programs > Accessories > Communications >

HyperTerminal.

i. In Windows 2000 Professional, select Start > Programs >

Accessories > Communications > HyperTerminal.

3. To create a shortcut to the Command icon, select the

Command icon, then select File > Create Shortcut. (The

shortcut to the Command icon is displayed in the

HyperTerminal window.)

4. To place the shortcut icon on the desktop, select the shortcut

icon, then drag it to the desktop.

5. To exit and close HyperTerminal, select File > Exit.

316740-002.book Page 7 Thursday, May 1, 2003 1:40 PM

Autres manuels pour Pavilion zd7000 - Notebook PC

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Ordinateur portable

HP Omnibook XE4000 series Guide de l'utilisateur

HP OmniBook 4100 Manuel utilisateur

HP nx6315 Manuel utilisateur

HP Compaq Presario Manuel utilisateur

HP ProBook 4410s - Notebook PC Instructions d'utilisation

HP 17 Series Manuel

HP 250 G4 Manuel utilisateur

HP EliteBook Revolve 810 G2 Tablet Instructions d'utilisation

HP 4310s - ProBook - Core 2 Duo 2.1 GHz Manuel utilisateur

HP 6820s - Notebook PC Manuel

HP Pavilion dv3500 - Entertainment Notebook PC Manuel utilisateur

HP L2000 Special Edition Manuel utilisateur

HP EliteBook x360 1040 G5 Manuel

HP Pavilion N3310 Manuel utilisateur

HP ENVY 14 Manuel utilisateur

HP HP 340 G7 Instructions de montage

HP Stream 14 Instructions de montage

HP ProBook 5330m Instructions d'utilisation

HP Compaq Presario Manuel utilisateur

HP Compaq Presario Manuel

HP Presario CQ40-600 - Notebook PC Manuel utilisateur

HP Pavilion dv4000 - notebook pc Guide de configuration rapide

HP Compaq nx6125 Manuel utilisateur

HP Mini 311-1000 Manuel utilisateur

Manuels Ordinateur portable populaires d'autres marques

Velocity

Velocity NoteMagix M10 Manuel utilisateur

Dell

Dell Alienware 17 R2 Manuel utilisateur

Toshiba

Toshiba A105-S2236 Manuel utilisateur

Winbook

Winbook LM Manuel utilisateur

Dell

Dell Inspiron 1464 Manuel utilisateur

Dell

Dell Inspiron 15R 5537 Manuel utilisateur

Dell

Dell Latitude ATG D620 Manuel utilisateur

Sony

Sony VAIO PCG-FX270 Manuel utilisateur

Dell

Dell Latitude 7310 Manuel utilisateur

Dell

Dell Precision GU806 Manuel utilisateur

Sony

Sony VAIO PCG-R505JLK Manuel utilisateur

Lenovo

Lenovo THINKPAD X32 Manuel utilisateur

Toshiba

Toshiba mini NB300 Manuel utilisateur

Lenovo

Lenovo ThinkPad X201 Tablet Manuel

Lenovo

Lenovo THINKPAD X31 Manuel

Sony

Sony VGN-T240P VAIO Manuel utilisateur

Compaq

Compaq Armada E700 Series Manuel utilisateur

Fujitsu

Fujitsu Lifebook A6230 Manuel utilisateur