HP Compaq Presario Mode d’emploi

Autres manuels pour Compaq Presario

307

Table des matières

Autres manuels HP Ordinateur portable

Manuels Ordinateur portable populaires d'autres marques

Velocity

Velocity NoteMagix M10 Manuel utilisateur

Dell

Dell Alienware 17 R2 Manuel utilisateur

Toshiba

Toshiba A105-S2236 Manuel utilisateur

Winbook

Winbook LM Manuel utilisateur

Dell

Dell Inspiron 1464 Manuel utilisateur

Dell

Dell Inspiron 15R 5537 Manuel utilisateur

Dell

Dell Latitude ATG D620 Manuel utilisateur

Sony

Sony VAIO PCG-FX270 Manuel utilisateur

Dell

Dell Latitude 7310 Manuel utilisateur

Dell

Dell Precision GU806 Manuel utilisateur

Sony

Sony VAIO PCG-R505JLK Manuel utilisateur

Lenovo

Lenovo THINKPAD X32 Manuel utilisateur

Toshiba

Toshiba mini NB300 Manuel utilisateur

Lenovo

Lenovo ThinkPad X201 Tablet Manuel

Lenovo

Lenovo THINKPAD X31 Manuel

Sony

Sony VGN-T240P VAIO Manuel utilisateur

Compaq

Compaq Armada E700 Series Manuel utilisateur

Fujitsu

Fujitsu Lifebook A6230 Manuel utilisateur

Using the Wedge

Attaching the Wedge to Your Computer

To attach the Wedge to your computer, complete the following steps:

1. Line up your computer with the alignment hooks on the Wedge.

2. Pivot your computer down and press it firmly into place on the Wedge.

Your computer will snap into place.

Attaching the Wedge

Detaching the Wedge from Your Computer

Before detaching the Wedge from your computer, you must first shut down

the computer, using one of the following methods:

•Turn off the computer using the standard Windows shutdown method.

•Press the Power ¹button to initiate Hibernation mode.

•Click the Start button on the Windows taskbar, then click Eject PC.

When the computer has shut down, detach the computer from the Wedge by

completing the following steps:

1. Press in the Wedge Release button located on the sides of the Wedge.

2. Lift your computer up and toward you.

Detaching the Wedge

Inserting the Battery

To insert the battery, complete the following steps:

1. If the AC adapter is not connected, turn off your computer.

2. Close the computer cover.

3. Slide the battery label side up into the compartment until you hear a click.

Inserting the Battery

Removing the Battery

To remove the battery, complete the following steps:

1. Save and close any open files.

2. If the AC adapter is not connected, turn off your computer.

3. Release the battery by sliding the switch on the underside of the unit in

the direction indicated by the arrow.

+NOTE: Only Compaq 1900 Series Mobile Internet PC batteries should be

installed in your computer.

4. Use the tab on the battery that extends below your computer to pull out

the battery.

aWARNING: To reduce the risk of damage to the battery or personal injury,

do not crush, puncture, or incinerate the battery or short the metal

contacts. Do not attempt to open or service the battery.

NOTICE

The information in this card is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR

EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE,

OR USE OF THIS MATERIAL.

This card contains information protected by copyright. No part of this card may be photocopied or

reproduced in any form without prior written consent from Compaq Computer Corporation.

©1999 Compaq Computer Corporation. All rights reserved.

Compaq is registered with the U.S. Patent and Trademark Office. Printed in the U.S.A., Brazil,

Canada, Japan, Korea, Singapore, Taiwan, and the U.K.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other

countries.

First Edition, July 1999

159204-001