HP Visualize j6000 Manuel utilisateur

Autres manuels pour Visualize j6000

2

Table des matières

Autres manuels HP Ordinateur de bureau

HP

HP Z1 G2 Instructions de montage

HP

HP Vectra SERIES Manuel d'instructions

HP

HP Pavilion t430 Manuel utilisateur

HP

HP All-in-One Instructions de montage

HP

HP D300s - Evo - 128 MB RAM Manuel

HP

HP VH677UA#ABA - Pavilion Dv6-1244sb... Fiche technique

HP

HP ThinkPad T43 Manuel du propriétaire

HP

HP Media Center Manuel utilisateur

HP

HP Pavilion Elite e9160f Manuel utilisateur

HP

HP 8100 - Elite Convertible Minitower PC Manuel d'utilisation et d'entretien

HP

HP A6300f - Pavilion - 2 GB RAM Fiche technique

HP

HP Z1 Manuel utilisateur

HP

HP Compaq Presario Manuel

HP

HP b2600 Manuel d'utilisation et d'entretien

HP

HP ZX2000 Manuel utilisateur

HP

HP TouchSmart dx9000 Manuel utilisateur

HP

HP PL Class 450/500/550/600/650/700/750 Manuel

HP

HP Compaq 8200 Elite Series Instructions d'utilisation

HP

HP Pavilion t100 - Desktop PC Manuel utilisateur

HP

HP Pavilion A6305 Manuel utilisateur

HP

HP Digital AlphaStation 255 Family Manuel d'utilisation

HP

HP dx7400 - Microtower PC Manuel d'utilisation et d'entretien

HP

HP P Elite SFF 600 G9 Instructions de montage

HP

HP Compaq Presario Manuel

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur

READ BEFORE INSTALLING

Desk-Side/Rack-Mount Conversion Process

This document provides information for converting your workstation from a desk-side system to

a rack-mounted system and from a rack-mount system to a desk-side system. You can find more

detailed information in the Technical Reference for the J6000 located at this web site:

www.hp.com/visualize/support/

Desk Side to Rack Mount Conversion

To convert your desk-side system to a rack-mount system, you will need to order the rack-mount

kit (HP Part Number: A5993A) from your local HP Sales Representative. Rack-mount to desk-

side instructions are on the last page.

1. Unplug the workstation, remove from pedestal, remove bezel and vents. See Figure 1.

Figure 1: Desk-side Cover Removal

2. Remove the workstation’s plastic cosmetic covers from the workstation. See Figure 2. The

same process is used for both covers.

Figure 2: Plastic-skin Cover Removal (same for both sides)

3. Follow the instructions on the subsequent pages for rack mounting your system:

Press snaps and push cover forward, and lift straight up.

!!Do not rotate cover

when removing!!

4. Plug-in the workstation that you just rack mounted and set the fan speed. To set the fan speed,

use the Boot Console Handler (bch) and follow this procedure.

A. Turn on the system and press the [Tab] key until the select display message appears.

Select the display frequency and resolution that are best for you.

B. Stop the boot process by press any key before the ten-second limit. This gets you to

the bch Main Menu. You will only need to do this if you have autoboot turned on;

otherwise, the system stops at the bch Main Menu. When the Main Menu prompt

appears, type:

Main Menu: Enter command > configuration

C. Enter the following command at the Configuration Menu prompt:

Configuration Menu: Enter command > FanChoice RackMount

D. Return to the Main Menu and enter this command at the prompt to continue booting:

Main Menu: Enter command > boot

During this procedure you removed the workstation’s plastic-skin covers, the bezel’s vent inserts,

installed the workstation in the rack, and set the workstation’s fan speed

Rack-Mount to Desk-Side Conversion

To convert your rack-mount system to a desk-side system, you will need to order the desk-side kit

(HP Part Number: A6036A) from your local HP Sales Representative.

1. Unplug the workstation and reverse the above procedure by completing steps 3, 2, and 1

(respectively).

2. Complete Step 4 above, but at the Configuration Menu prompt, type:

Configuration Menu: Enter command > FanChoice DeskSide

This completes the conversion of the rack-mount system to the desk-side system.

*A5990-90004*

A5990-90004