HP ProDesk 405 G1 Instructions d'installation
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP ProDesk 405 G1 Microtower Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium coin
or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
5
External electrical cables and cords
Power cord
1
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
system fan 94g,PSU fan 68g
162g
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screw driver
T-15
Micro shear
YN-3
Screw driver
PH1
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove access panel. (see Figure 1-3)
2. Remove front bezel. (see Figure 4)
3. Disconnect cooler cable then remove the cooler from board. (see Figure5-7)
4. Disconnect 24 pin power cable、SATA cable、SATA power cable、CPU power cable. (see Figure 8-11)
5. Remove the ODD and HDD from chassis (see Figure 12-16)
6. Disconnect the MCR cable from board then remove the MCR. (see Figure 17-19)
7. Disconnect system fan cable then remove the system fan from chassis (see Figure 20-22)
8. Disconnect FIO cables and open the cable clip. (see Figure 23-24)
9. Remove the FIO module from chassis. (see Figure 25-26)
10. Disconnect PWR cable then remove it from chassis. (see Figure 27-28)
11. Disconnect speaker cable then remove it from chassis. (see Figure 29-31)
12. Remove the Memory from chassis. (see Figure 32)
13. Remove the battery from the board. (see Figure 33)
14. Remove Mother board from chassis. (see Figure 34-36)
15. Remove the I/O shielding from chassis. (see Figure 37)
16. Remove the PSU from chassis. (see Figure 38&39)
17. Remove the PSU chassis and remove the PSU board.. (see Figure 40-43)
18. Remove the Electrolytic Capacitors from PSU board. (see Figure 44-54)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Figure1 Loose the two screws from access panel
Figure2 Slide the access panel back
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure3 Rotate the top of the panel away to remove it
Figure4 Pull the 3 hooks and rotate to remove the front
bezel
Figure5 Disconnect the cooler cable from MB
Figure6 Loose 4 screws from cooler and remove it
EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Autres manuels pour ProDesk 405 G1
3
Autres manuels HP Ordinateur de bureau
HP
HP A1210n - Pavilion - 512 MB RAM Guide de démarrage rapide
HP
HP Presario SR1700 - Desktop PC Instructions d'installation
HP
HP Compaq dx6120 ST Manuel d'utilisation et d'entretien
HP
HP A320m - Pavilion - 256 MB RAM Manuel utilisateur
HP
HP d325 MT Manuel de référence
HP
HP i2000 Instructions de montage
HP
HP d325 Series Manuel d'utilisation et d'entretien
HP
HP A1210n - Pavilion - 512 MB RAM Manuel utilisateur
HP
HP Compaq 6005 Pro MT Manuel
HP
HP Model 745 - VME Workstation Manuel utilisateur
HP
HP 300-1020 - TouchSmart - Desktop PC Mode d’emploi
HP
HP Z2 SFF G5 Instructions de montage
HP
HP Compaq Presario Manuel
HP
HP ProDesk 600 G5 PCI MT Manuel
HP
HP Surestore 64 - Director Switch Manuel utilisateur
HP
HP Pavilion t400 - Desktop PC Instructions d'installation
HP
HP Pavilion t402 Manuel utilisateur
HP
HP ENVY Instructions d'installation
HP
HP Compaq Presario Manuel utilisateur
HP
HP Compaq nw8440 Instructions d'utilisation
