HP 3000 Series Manuel utilisateur

HP 3000 Series 9x9 to HP 9000 K Class Conversion

Manual

HP Part No. A3468-90001

Printed in USA December 1996

Edition 2 - E1296

©Copyright Hewlett-Packard Company 1996

prohibited, except as allowed under the copyright laws.

Preliminary, December 1996

Printed in USA

Manual part number A3468-90001

Manufacturing part number A3468-96002

iii

Certification and Warranty

Certification

Hewlett-Packard Company certifies that this product met its published specification at the time of

shipment from the factory. Hewlett-Packard further certifies that its calibration measurements are

traceable to the United States National Institute of Standards and Technology (formerly National

Bureau of Standards), to the extent allowed by the Institute's calibration facility, and to the calibration

facilities of other International Standards Organization members.

Warranty

This Hewlett-Packard instrument product is warranted against defects in material and workmanship

for a period of one year from date of shipment. During the warranty period, Hewlett-Packard

Company will, at its option, either repair or replace products which prove to be defective.

For detailed warranty information, see back matter.

Safety Considerations

General

This product and related documentation must be reviewed for familiarization with this safety

markings and instructions before operations.

This product is a safety Class I instrument (provided with a protective earth terminal).

Before Applying Power

Verify that the product is set to match the available line voltage and the correct fuse is installed. Refer

to instructions in Chapter 1 of the Manual.

Safety Earth Ground

An uninterruptible safety earth ground must be provided from the mains power source to the product

input wiring terminals or supplied power cable.

Warning Symbols Used In This Book

Instruction manual symbol; the product will be marked with this symbol when it is

necessary for the user to refer to the instruction manual.

Indicates hazardous voltages.

Indicates earth (ground) terminal.

Indicates terminal is connected to chassis when such connection is not apparent.

Indicates Alternating current.

Indicates Direct current

WARNING

BODILY INJURY OR DEATH MAY RESULT FROM FAILURE TO HEED A

WARNING. DO NOT PROCEED BEYOND A WARNING SIGN UNTIL THE

INDICATED CONDITIONS ARE FULLY UNDERSTOOD AND MET.

CAUTION

Damage to equipment, or incorrect measurement data, may result from failure to

heed a caution. Do not proceed beyond a CAUTION sign until the indicated

conditions are fully understood and met.

For additional safety and acoustic noise information, see back matter.

Preface

This edition of the Conversion Guide is intended for trained and experienced Hewlett-Packard field

maintenance. At the time of publication, this computer system family includes the models listed

below:

HP 3000 Series 9x9

vii

TABLE OF CONTENTS

INTRODUCTION.....................................................................................................1

Electrostatic Discharge ....................................................................................................................2

Unpacking and Inspection ..............................................................................................................2

Unpack Conversion Kit Components ............................................................................................2

Claims Procedures .........................................................................................................................3

Repacking ......................................................................................................................................3

Storage...........................................................................................................................................3

Returning Components ...................................................................................................................4

CONVERSION PROCEDURES..............................................................................5

Required Tools .................................................................................................................................5

Modifying the Console, Primary and Alternate boot paths ........................................................6

Replacing the Core I/O card ...........................................................................................................7

Installing the Modem Distribution Panel cable and the console cable ........................................7

UPS Connection ............................................................................................................................... 7

Updating Stable Storage ..................................................................................................................7

Updating the System Labels............................................................................................................8

Changing the Nameplate .................................................................................................................8

Installing the HP UX Operating System ........................................................................................9

Investment Protection Program .....................................................................................................9

viii

Introduction

This manual contains the information necessary to convert the following HP 3000 Series 9x9 to HP

9000 K Class Systems:

Table 1. System Conversion Kits

From HP 3000 System To HP9000 System Conversion kit Number

939KS K400 1 CPU A3468A opt 010

959KS/100 K400 1 CPU A3468A opt 011

959KS/200 K400 2 CPU A3468A opt 012

959KS/300 K400 3 CPU A3468A opt 013

959KS/400 K400 4 CPU A3468A opt 014

969KS/100 K410 1 CPU A3468A opt 021

969KS/200 K410 2 CPU A3468A opt 022

969KS/300 K410 3 CPU A3468A opt 023

969KS/400 K410 4 CPU A3468A opt 024

969KS/120 K420 1 CPU A3468A opt 031

969KS/220 K420 2 CPU A3468A opt 032

969KS/320 K420 3 CPU A3468A opt 033

969KS/420 K420 4 CPU A3468A opt 034

979KS/100 K460 1 CPU A3468A opt 041

979KS/200 K460 2 CPU A3468A opt 042

979KS/300 K460 3 CPU A3468A opt 043

979KS/400 K460 4 CPU A3468A opt 044

The procedures in this manual are intended for use by Hewlett-Packard Customer Engineers (CEs)

and those service personnel who have successfully completed authorized HP training.

The installation and environmental requirements for the conversion systems are the same as the

original computer system. There may be a requirement for additional power outlets for certain

conversions. Be sure to confirm the power requirements for the conversion being performed. See the

HP 9000 Configura-tion Guide for the power guidelines.

Observe WARNING and CAUTION labels on the equipment. All conversion and service work

must be done by qualified personnel.

Introduction

Electrostatic Discharge

HP computers and peripherals contain assemblies and components that are sensitive to electrostatic

discharge (ESD). Carefully observe the precautions and recommended procedures to ensure that

system reliability is not compromised due to component damage from static electricity.

The following precautions can significantly reduce the risk of system failure or malfunction due to

ESD.

• Always wear a grounded wrist strap when working around the system.

• Treat all assemblies, components, and connections as sensitive.

• When unpacking cards, interfaces, and other accessories that are packaged separately

from the computer, keep the accessories in their conductive bags until they are ready

to be installed.

• Before removing or replacing any components or installing any accessories, select a

work area where potential static sources are minimized (preferably an anti-static work

station).

• Keep body movement to a minimum during accessory installation.

• Avoid working in carpeted areas.

Unpacking and Inspection

The components, software, documentation, and circuit cards involved may be shipped in more than

one container. Check to ensure receipt of all the containers specified by the carrier's Bill of Lading.

Inspect each container for any evidence of mishandling during transit. If any of the containers are

damaged, request that the carrier's agent be present when the damaged containers are opened.

Unpack each shipping container and inspect each item for external damage. Look for damage such as

broken connectors or dented corners. If present, check rigid foam packing for signs of damage that

could indicate rough handling in transit.

Unpack Conversion Kit Components

Unpack the conversion kit components as follows:

1. Open the carton.

2. Remove the component.

3. Remove the component from the anti-static packing (adhering to EDS guidelines) and

visually inspect it for damage.

4. Put the component back into the anti-static packing until installation is performed.

If the visual inspection reveals damage to a component, follow the instructions in the Claims

Procedures section.

Autres manuels pour 3000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Ordinateur de bureau

HP Compaq dc7600 MT Manuel d'installation et d'exploitation

HP Compaq dc5700 SFF Manuel d'utilisation et d'entretien

HP VR Backpack G2 Manuel

HP Pavilion Slimline s3400f Manuel utilisateur

HP dx2290 - Microtower PC Manuel utilisateur

HP Compaq Presario Manuel

HP Pavilion v400 - Desktop PC Manuel utilisateur

HP dc5100 - Microtower PC Manuel d'utilisation et d'entretien

HP 5850 - Deskjet Color Inkjet Printer Manuel utilisateur

HP 6305 SF Manuel utilisateur

HP 260 G2 DM Manuel d'utilisation et d'entretien

HP m9350f - Pavilion - Elite Fiche technique

HP EliteOne 800 G2 Manuel d'utilisation et d'entretien

HP CQ2700 Manuel utilisateur

HP 100B - All-in-One PC Guide de configuration

HP Compaq Presario Manuel

HP A320m - Pavilion - 256 MB RAM Instructions d'installation

HP 742n - Pavilion - 512 MB RAM Instructions d'installation

HP EliteDesk 800 G1 series Manuel utilisateur

HP s3700f - Pavilion - Slimline Manuel d'utilisation et d'entretien

HP Xw8200 - Workstation - 1 GB RAM Manuel utilisateur

HP Compaq 6000 Pro SFF Manuel utilisateur

HP Pavilion Slimline s3401f Fiche technique

HP Workstation xw8000 Manuel d'utilisation et d'entretien

Manuels Ordinateur de bureau populaires d'autres marques

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur

Everex

Everex eXplora Manuel utilisateur

Lenovo

Lenovo ThinkCentre M75e Manuel utilisateur

Dell

Dell Alienware Area-51 R4 Manuel utilisateur