HP 86H1880 Manuel utilisateur

PCI Wake on LAN Token Ring Adapter

86H1880

Installation Guide

All manuals and user guides at all-guides.com

all-guides.com

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or use

of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written consent

of Hewlett-Packard Company.

Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft

Corporation.

MMXTM is a trademark of Intel Corporation.

Pentium® is a registered trademark of Intel Corporation.

Hewlett-Packard France

Commercial Desktop Computing Division

38053 Grenoble Cedex 9

France

All manuals and user guides at all-guides.com

1 Connecting to a Netware 3.12 Server

Windows for Workgroups

1 Connecting to a Netware 3.12 Server

Windows for

Workgroups

Requirements

• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.

• Driver Name: IBMTRPO.LAN Size: 65KB Date: 7/26/96

• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1Boot the Vectra to a DOS prompt, and insert the IBM Token-Ring 16/4 PCI

adapter and drivers CD ver 1.

2VE7/VE8: From the "IBMTRPCI\LANAID\" directory on your CD-ROM

type "LANAIDC/VIEW" to verify the deice configuration settings. VL8 and

VE7/VE8: From the “IBMWOL\IBMTRPCI\LANAID\” directory on your

CD-ROM run “LANAID.EXE.”

3Hit enter for “Software Installation” and verify the following options:

4DOS with Windows v3.1x

5Express Install LAN Client’s NetWare Client & 802.2

6Hit enter to continue, and at the “Express Install of IBM LAN Client”

window, hit enter to install.

7After file copy is complete, remove any diskettes, hit enter four times to

exit, then reboot the computer.

8After Windows loads, open the “Netware User Applications” window, and

Vectra VL8 Vectra VE7/VE8

Interrupt 11 10(11)

I/O Address C800-h DC00h

Card State - Enabled

All manuals and user guides at all-guides.com

1 Connecting to a Netware 3.12 Server

Windows for Workgroups

double-click the “NetWare User Login” icon.

9Login into the current server to verify connection.

(If you do not have the required information to Login, contact your system

administrator)

All manuals and user guides at all-guides.com

1 Connecting to a Netware 3.12 Server

Windows 95 SR2

Windows 95 SR2 Requirements

• HP Vectra with Windows 95SR2 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2

• Driver Name for Vectra VL8: W95SETUP.INF Size: 8K Date: 10/18/96

• Driver Name for Vectra VE7/VE8: OEMSETUP.INF Size: 65K Date: 08/05/

97.

• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card

into a PCI slot.

2Boot the machine to Windows 95, and the Token-Ring card will

automatically be recognized. Click on “Next.”

3When prompted, click on “Other Locations.”

4Insert drivers CD, set the path to “D:\WIN95\” (Where “D” is the drive

letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

5Click on “OK” to continue the installation.

6Verify that “IBM PCI Token-Ring Adapter, NDIS2/3” is listed and click on

“Finish.”

7Click “OK” to provide your Computer and Workgroup names.

8Enter your Computer Name, Workgroup Name, Computer Description,

and click on “Close.”

Vectra VL8 Vectra VE7/VE8

Card State - Enabled

Interrupt 11 10(5)

I/O Address C800-h DC00-h

All manuals and user guides at all-guides.com

1 Connecting to a Netware 3.12 Server

Windows 95 SR2

9When prompted for the “IBM PCI Token-Ring Option Diskette” click on

“OK.”

10 In the “Copying Files…” dialogue box, set the path to “D:\DOS\” (Where

“D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\DOS\”)

11 When prompted for the file “IBMTRP.VXD”, set the path to “D:\WIN95\”

(Where “D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

12 When prompted to insert the Windows 95 CD-ROM, click on “OK.”

13 Set the path to your Windows 95 files and click on “OK.”

(If you have an HP pre-loaded HDD, set the path statement

C:\MASTERS\WIN95\SYSTEM\CABS\”).

14 Click on “Yes” to restart your computer and finish the installation.

All manuals and user guides at all-guides.com

all-guides.com

2 Connecting to a Netware 4.11 Server

Windows for Workgroups

2 Connecting to a Netware 4.11 Server

Windows for

Workgroups

Requirements

• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.

• Driver Name: IBMTRPO.LAN Size: 65KB Date: 7/26/96

• Novell Netware server 4.1 that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1Boot the Vectra to a DOS prompt, and insert the IBM Token-Ring 16/4 PCI

adapter and drivers CD ver 1.

2From the “IBMWOL\IBMTRPCI\LANAID\” directory on your CD-ROM run

“LANAID.EXE.”

3Hit enter for “Software Installation” and verify the following options:

4DOS with Windows v3.1x

5Express Install LAN Client’s NetWare Client & 802.2

6Hit enter to continue, and at the “Express Install of IBM LAN Client”

window, hit enter to install.

7After file copy is complete, remove any diskettes, hit enter four times to

exit, then reboot the computer.

8After Windows loads, open the “Netware User Applications” window, and

double-click the “NetWare User Login” icon.

9Login into the current server to verify connection.

Vectra VL8 Vectra VE7/VE8

Card State - Enabled

Interrupt 11 10(11)

I/O Address C800-h DC00-h

All manuals and user guides at all-guides.com

2 Connecting to a Netware 4.11 Server

Windows for Workgroups

(If you do not have the required information to Login, contact your system

administrator)

All manuals and user guides at all-guides.com

2 Connecting to a Netware 4.11 Server

Windows 95 SR2

Windows 95 SR2 Requirements

• HP Vectra with Windows 95SR2 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2

• Driver Name: W95SETUP.INF Size: 8K Date: 10/18/96

• Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card

into a PCI slot.

2Boot the machine to Windows 95, and the Token-Ring card will

automatically be recognized. Click on “Next.”

3When prompted, click on “Other Locations.”

4Insert drivers CD, set the path to “D:\WIN95\” (Where “D” is the drive

letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

5Click on “OK” to continue the installation.

6Verify that “IBM PCI Token-Ring Adapter, (NDIS2/3)” is listed and click

on “Finish.”

7Click “OK” to provide your Computer and Workgroup names.

8Enter your Computer Name, Workgroup Name, Computer Description,

and click on “Close.”

9When prompted for the “IBM PCI Token-Ring Option Diskette” click on

“OK.”

Vectra VL8 Vectra VE7/VE8

Card State - Enabled

Interrupt 11 10(5)

I/O Address C800-h DC00-h

All manuals and user guides at all-guides.com

2 Connecting to a Netware 4.11 Server

Windows 95 SR2

10 In the “Copying Files…” dialogue box, set the path to “D:\DOS\” (Where

“D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\DOS\”)

11 When prompted for the file “IBMTRP.VXD”, set the path to “D:\WIN95\”

(Where “D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

12 When prompted to insert the Windows 95 CD-ROM, click on “OK.”

13 Set the path to your Windows 95 files and click on “OK.”

(If you have an HP pre-loaded HDD, set the path statement

C:\MASTERS\WIN95\SYSTEM\CABS\”).

14 Click on “Yes” to restart your computer and finish the installation.

All manuals and user guides at all-guides.com

Table des matières

Autres manuels HP Adaptateur

HP NC310F Instructions d'utilisation

HP NC550m Instructions d'utilisation

HP 562FLR-SFP+ Instructions d'utilisation

HP Nc551m Instructions d'utilisation

HP 652503-B21 Manuel utilisateur

HP D5970A - NetServer - LCII Manuel utilisateur

HP hn210p Manuel utilisateur

HP NC552SFP Manuel utilisateur

HP 570M Instructions d'utilisation

HP 3COM ETHERLINK III 3C900-B Manuel utilisateur

HP 331FLR Manuel utilisateur

HP NC6170 Manuel utilisateur

HP P3410A - NetRAID 1M RAID Controller Feuille d'instructions

HP 647590-B21 Manuel utilisateur

HP 90W Manuel utilisateur

HP 530SFP+ Manuel utilisateur

HP Flex-10 10Gb 2-port 552M Instructions d'utilisation

HP 728987-B21 Manuel utilisateur

HP NC7771 Manuel utilisateur

HP Ethernet 10Gb 2-port 530T Adapter Manuel utilisateur

HP BladeSystem Dual NC370i - Multifunction Network... Manuel utilisateur

HP BT400 Manuel utilisateur

HP J3420B HP-HSC ATM/155 Manuel utilisateur

HP 560FLB Instructions d'utilisation

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur