Hoymiles HM-600N Manuel utilisateur

Quick Installation Guide

HM-600N/HM-700N/HM-800N AP040240 REV1.2 1 / 2

1. Accessories

Item

Description

AC End Cable (Female), 2m 12AWG Cable

M8*25 screws

DC Extension Cable, 1m

AC Female End Cap, IP67

*Note: All accessories above are not included in the package, and need to be purchased

separately. Please contact our sales representative for the price. (M8 screws need to be

prepared by installer-self.)

2. Installation Steps

Please make sure the microinverter install under the required environment.

(Please refer to product user manual for more details.)

Step 1. Fix Microinverter on the Rail

A) Mark the approximate center of each panel on the frame.

B) Fix the screw on the rail.

C) Hang the microinverter on the screw (shown as picture below), and tighten the screw.

The silver cover side of the microinverter should be facing the panel.

*Note: Please install the microinverter at least 50cm above the ground/roof for better

communication with Hoymiles DTU.

Step 2. Connect AC Cables of Microinverter

A) Plug the AC connector of the first microinverter with the connector of the second

microinverter, to form a continuous AC branch circuit.

*Note: The length of AC cable on microinverter is around 2.06m. If the distance between two

microinverters is more than 2.04m, please use the AC extension cable between two inverters

(As picture indicated below).

B) Install the AC end cap on the open AC connector of the last microinverter in the AC

branch circuit.

Step 3. Connect AC End Cable

A) Make the AC end cable.

1. Take the AC port apart into 3 parts:

Quick Installation Guide

HM-600N/HM-700N/HM-800N AP040240 REV1.2 2 / 2

2. Insert the AC cable from Part 3 to Part 2, and complete the wiring for the L, N and Ground

inside Part 1 AC port accordingly:

*Note: L: Brown wire N: Blue wire G: Yellow/Green wire

Please use 12 AWG cable as AC end cable

3. Plug the AC port Part 2 into Part 1 once complete the wiring, and screw the Part 3 on

and complete the AC extension cable:

B) Connect the AC end cable to the AC male connector of the first microinverter to complete

the circuit.

C) Connect the other side of the AC end cable to the distribution box, and wire it to the local

grid network.

Step 4. Create an Installation Map

A) Peel the removable serial number label from each microinverter (The position of the label

is shown as below.)

B) Affix the serial number label to the respective location on the installation map.

Step 5. Connect PV Modules

A) Mount the PV modules above the microinverter.

B) Connect the PV modules’ DC cables to the DC input side of the microinverter.

Step 6. Energize the System

A) Turn on the AC breaker of the branch circuit.

B) Turn on the main AC breaker of the house. Your system will start to generate power after

about two-minute wait time.

Step 7. Set Up the Monitoring System

Refer to the DTU User Manual or DTU Quick Install Guide, and Quick Installation Guide for

HMP Online Registration to install the DTU and set up your monitoring system.

Product information is subject to change without notice. (Please download reference manuals

at www.hoymiles.com.)

Ce manuel convient aux modèles suivants

Autres manuels Hoymiles Onduleur

Hoymiles

Hoymiles HMS-600-2T Manuel utilisateur

Hoymiles

Hoymiles HM-1500NT Manuel utilisateur

Hoymiles

Hoymiles HMS-1600-4T-NA Manuel utilisateur

Hoymiles

Hoymiles HMS-1800 Manuel utilisateur

Hoymiles

Hoymiles MI-300T Manuel utilisateur

Hoymiles

Hoymiles MI-600 Manuel utilisateur

Hoymiles

Hoymiles HM-800 Manuel utilisateur

Hoymiles

Hoymiles HYT-5.0HV-EUG1 Manuel utilisateur

Hoymiles

Hoymiles HME-1000-AU Manuel utilisateur

Hoymiles

Hoymiles HMS-500-1A Manuel utilisateur

Hoymiles

Hoymiles HM-300T Manuel utilisateur

Hoymiles

Hoymiles MI-300NT Manuel utilisateur

Hoymiles

Hoymiles MI-1000T Manuel utilisateur

Hoymiles

Hoymiles MI-600N Manuel utilisateur

Hoymiles

Hoymiles HM-300N Manuel utilisateur

Hoymiles

Hoymiles HM-300T Manuel utilisateur

Hoymiles

Hoymiles MI-1000 Manuel utilisateur

Hoymiles

Hoymiles HMS-700-2T-NA Manuel utilisateur

Hoymiles

Hoymiles HM-600 Manuel utilisateur

Hoymiles

Hoymiles HMS-2000-4T Manuel utilisateur

Hoymiles

Hoymiles MI-300 Manuel utilisateur

Hoymiles

Hoymiles DTU-G100 3rd Gen Manuel utilisateur

Hoymiles

Hoymiles MI-1000 Guide d'installation

Hoymiles

Hoymiles HM-1000N Manuel utilisateur

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur