Hoymiles HM-1000NT Manuel utilisateur

Quick Installation Guide

HM-1000NT/HM-1200NT/HM-1500NT AP040239 REV1.1 1 / 2

1. Accessories

Item

Description

AC Bus Cable, 12/10 AWG Cable

DC Extension Cable, 1m

M8*25 screws

AC Connector Unlock Tool

Bus Connector Unlock Tool

AC Sub Cap

AC Bus End Cap, IP67

*Note: All accessories above are not included in the package, and need to be purchased

separately. Please contact our sales representative for the price. (M8 screws need to be

prepared by installer-self.)

2. Installation Steps

Please make sure the microinverter is installed under the required environment.

(Please refer to product user manual for more details.)

2.1 Pre-installation

A) Plan the cable length to make the bus cable aligned with each PV module.

B) Install the AC bus end cap:

- Uses the bus connector unlock tool to unlock the port upper cover;

- Loose the three screws with the screwdriver. Untighten the cap as circled below,

and remove the extra cable.

- Screw the cap back to port, and plug in the AC bus end cap.

- Plug the upper cover back to the bus connector.

2.2 Installation Steps

Step 1. Fix Microinverter on the Rail

A) Mark the approximate center of each panel on the frame.

B) Fix the screw on the rail.

C) Hang the microinverter on the screw (shown as picture below), and tighten the

screw. The silver cover side of the microinverter should be facing the panel.

*Note: Please install the microinverter at least 50cm above the ground/roof for better

communication with Hoymiles DTU.

Step 2. Complete the AC Connection

A) Attach the AC bus cable to the mounting rail, and fix the cable with tie wraps.

Quick Installation Guide

HM-1000NT/HM-1200NT/HM-1500NT AP040239 REV1.1 2 / 2

B) Push the AC connector of microinverter to the trunk cable connector until you hear

“click”.

C) If there is any vacant bus port, please plug the AC sub cap on the vacant plug to

ensure waterproof and dustproof

*Note: Under the circumstances that need to remove the inverter AC cable from bus port,

please use the AC connector unlock tool and insert the tool into the side of AC port.

Step 3. Install AC End Cable

A) Prepare the AC end cable with the proper length, and insert one side of the cable

into the cap. Match the L, N and Ground line into the slot accordingly. Tighten

the screws, and then tighten the cap back to the port. Plug the upper cover back

to the bus connector.

B) Connect the other side of the AC end cable to the distribution box, and wire it to

the local grid network.

Step 4. Create an Installation Map

A) Peel the removable serial number label from each microinverter (The position of

the label is shown as below.)

B) Affix the serial number label to the respective location on the installation map.

Step 5. Connect PV Modules

A) Mount the PV modules above the microinverter.

B) Connect the PV modules’ DC cables to the DC input side of the microinverter.

Step 6. Energize the System

A) Turn on the AC breaker of the branch circuit.

B) Turn on the main AC breaker of the house. Your system will start to generate

power after about two-minute wait time.

Step 7. Set Up the Monitoring System

Refer to the DTU User Manual or DTU Quick Install Guide, and Quick Installation

Guide for HMP Online Registration to install the DTU and set up your monitoring

system.

Product information is subject to change without notice. (Please download reference

manuals at www.hoymiles.com.)

Ce manuel convient aux modèles suivants

Autres manuels Hoymiles Onduleur

Hoymiles

Hoymiles MI-250 Manuel utilisateur

Hoymiles

Hoymiles HM-1000 Manuel utilisateur

Hoymiles

Hoymiles HY3 Series Manuel utilisateur

Hoymiles

Hoymiles HYT-5.0HV-AUG1 Manuel utilisateur

Hoymiles

Hoymiles MI-600N Manuel utilisateur

Hoymiles

Hoymiles MI-600 Manuel utilisateur

Hoymiles

Hoymiles HM-800 Manuel utilisateur

Hoymiles

Hoymiles MI-500 Manuel utilisateur

Hoymiles

Hoymiles MI-300T Manuel utilisateur

Hoymiles

Hoymiles HM-600T Manuel utilisateur

Hoymiles

Hoymiles HM-1000 Manuel utilisateur

Hoymiles

Hoymiles HMS-350-1T Manuel utilisateur

Hoymiles

Hoymiles HYT-5.0HV-EUG1 Manuel utilisateur

Hoymiles

Hoymiles HMS-500-1T Manuel utilisateur

Hoymiles

Hoymiles MI-1000 Guide d'installation

Hoymiles

Hoymiles HA S-3.0LV-EUG1 Manuel utilisateur

Hoymiles

Hoymiles HM-600NT Manuel utilisateur

Hoymiles

Hoymiles HMT-2000-4T Series Manuel utilisateur

Hoymiles

Hoymiles HYS-8.0LV-EUG2 Manuel utilisateur

Hoymiles

Hoymiles MI-1000NT Manuel utilisateur

Hoymiles

Hoymiles HYS-7.6LV-USG1 Manuel utilisateur

Hoymiles

Hoymiles HMS-1600C-4T Manuel utilisateur

Hoymiles

Hoymiles MI-600NT Manuel utilisateur

Hoymiles

Hoymiles MI-300T Manuel utilisateur

Manuels Onduleur populaires d'autres marques

Fourgroup

Fourgroup Easy Manuel utilisateur

Velleman

Velleman PI300M Manuel utilisateur

Sungrow

Sungrow SG350HX-US Manuel utilisateur

WilTec

WilTec 61897 Manuel utilisateur

SMA

SMA SUNNY BOY STORAGE 2.5 Manuel utilisateur

Simplicity

Simplicity LANDLORD 316 Manuel utilisateur

Santak

Santak SMAX 3000 Manuel utilisateur

ATON

ATON RA.Store-3 Manuel utilisateur

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuel utilisateur

Tektronix

Tektronix CFG250 Manuel utilisateur

Champion

Champion 200989 Manuel utilisateur

Vanner

Vanner 20-500 Series Manuel utilisateur

GE GEP Manuel utilisateur

Astrel Group

Astrel Group Power Reducer Guide rapide

MULTIQUIP

MULTIQUIP GDP-5H Mode d’emploi

GoWISE

GoWISE PS1007 Manuel utilisateur

Promate

Promate PM13500D ES Manuel utilisateur

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuel utilisateur