Howard Miller 615010 Manuel utilisateur

4- SHORT

SCREWS

HOWARD MILLER

MODEL 615010

ASSEMBLY INSTRUCTIONS

PARTS LIST:

8- LONG

SCREWS 1- CLOCK DIAL

ASSEMBLY

1- LARGE BASE RING

1- SMALL BASE RING

7. Hook the large curl of the third leg

around the small base ring.

4. Using the same procedure as in

steps 2 and 3, attach the second

leg, adjacent to the first leg.

5. Place the large base ring over the

outside of the legs, inside of the

small curls of the legs.

LARGE BASE RING

6. Place the small base ring inside of

the large curls of the two legs.

SMALL BASE RING

8. Lift the large base ring and slide

the small curl of the leg under the

ring.

9. Using a short screw attach the

third leg to the clock dial assembly.

1. Place the clock dial assembly

upside down on a soft clean

surface.

3. Using a short screw attach the leg

to the clock dial assembly.

2. Align the hole in the top (small curl

end) of of the legs with one of

the four holes in the outside ring of

the clock dial assembly.

one

ALIGN

HOLES

4- RUBBER

PADS

1- GLASS TOP

(NOT SHOWN)

4- LEGS

NOTE: Do not completely tighten screws until all parts have been assembled, step 13.

Do not push or lean on the back of the dial when assembling.

13.Tighten all 12 screws used to

attach the legs, clock dial

assembly, and base rings.

15.Place the glass top on the rubber

pads, centered on the base.

10.Use the same procedure in steps

7, 8, and 9 to attach the fourth leg.

11.Align the holes in large base ring

with the holes in the legs. Using

the long screws attach the ring to

the legs.

12.Align the holes in small base ring

with the holes in the legs. Using

the long screws attach the ring to

the legs.

Note: The holes in the ring may not align perfectly with the holes in the legs and you

may need to apply moderate force to the ring or leg in order to start the screws.

PD10063-R2

10/10

14.Turn the assembled base over so

that the dial is facing up. Attach

the rubber pads over the screw

holes in the outer ring of the base.

RUBBER PAD

Autres manuels Howard Miller Horloge

Howard Miller

Howard Miller 615-052 Manuel utilisateur

Howard Miller

Howard Miller 615116 Manuel d'installation

Howard Miller

Howard Miller Seville Manuel utilisateur

Howard Miller

Howard Miller 611274 Manuel d'installation

Howard Miller

Howard Miller MYDay 625-488 Manuel utilisateur

Howard Miller

Howard Miller 615096 Manuel d'installation

Howard Miller

Howard Miller 615088 Manuel d'installation

Howard Miller

Howard Miller 615-069 Manuel utilisateur

Howard Miller

Howard Miller 611319 Manuel d'installation

Howard Miller

Howard Miller 615100 Manuel d'installation

Howard Miller

Howard Miller LEWISBURG Manuel utilisateur

Howard Miller

Howard Miller 61123 Manuel utilisateur

Howard Miller

Howard Miller 615114 Manuel d'installation

Howard Miller

Howard Miller BEDFORD PARK Manuel d'installation

Howard Miller

Howard Miller WALL AND MANTEL CLOCK Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur