Hovo 700 Manuel utilisateur
MULTI-FUNCTION ROBOTIC VACUUM CLEANER
Model NO.: Hovo 700 Series
USER MANUAL
REV. 011117
Table of Contents
Table of Contents·······················································01
Safety Instructions······················································02
Product Features····················································03-04
Product Accessories and Anatomy
Main Unit and Accessories··············································05
Anatomy of the Main Unit···············································06
Unit Display Panel·······················································07
Installing the Battery·····················································08
Product Operations and Settings
Auto Charging Dock Station and Battery Charging Methods················09
Remote Control························································10
UV Lamp and Water Seeping Speed Settings······························11
Clock and Cleaning Schedule Settings····································12
Virtual Blocker Settings·················································13
Product Maintenance
Installing/Removing/Cleaning the Dust Bin································14
Removing the Roller Brush··············································15
Installing the Roller Brush···············································16
Installing/Removing the Suction Inlet·····································17
Installing the Mop Attachment and Water Tank···························18
Error Codes and Troubleshooting··········································19
Technical Specifications·················································20
Before using this product, please read the following safety instructions
and follow all routine safety precautions!
Please read these instructions carefully.
Please store this manual properly.
Any operation not in compliance with this manual is likely to cause damage to the product.
Warning
Only authorized service
technicians may disassemble,
repair or modify the product.
Do not use any AC adapter other
than the one accompanying this
appliance. Otherwise it may cause
fire resulting from product damage,
electric shock or high voltage.
Do not over bend the power cord
or place heavy objects on it. Doing
so may damage the cord, causing
a fire or electric shock.
Keep away from cigarettes,
lighters, matches, and flammable
materials.
Turn off the power before
transporting or putting it in
prolonged storage, otherwise the
battery may be damaged.
Check the connection between the
AC adapter and the socket for
reliability. Otherwise it may result
in non-charging and fire.
Plug the power cord of the AC
adapter tight, or it may cause
electric shock, short circuit,
smoke or fire.
Before leaving vacuum cleaner in a
long idle period, fully recharge the
battery and store in a cool, dry
place. Keep the bottom of the
appliance dry.
Not intended for use by persons
(including children) with reduced
physical or mental capabilities.
Attention: Do not let the robot
vacuum water and other liquids,
otherwise product may get damaged.
Prior to use, remove all
damage-prone objects (fabrics,
glass bottles, etc.). Otherwise it
may cause damage to these
objects, or affect the
performance of the appliance.
Do not use the vacuum cleaner in
confined spaces (small table, chair)
as it may lead to product damage.
Product Features
Two-way virtual blocker (not included for Hovo 700 or Hovo 750)
The virtual blocker creates an invisible barrier that the cleaner will not cross. This can
confine the cleaner to a particular room or area.
The cleaner can control the water seeping speed of the water tank automatically. You can
select the water seeping speed through the remote control to achieve the optimal uniform
wet mopping effect. While charging, water seeping will be shut off automatically to prevent
water leakage.
Intelligent voice message for power-on, malfunction, dust bin full, improper operation,
water tank empty, etc.
One large capacity dust bin (0.9L ) used for normal vacuum cleaning, and a 0.6L capacity
water tank combined with one small dust bin (0.2L) used for vacuuming & wet mopping.
3D UV kills bacteria on floors, the suction inlet, and inside of the dust bin.
Patent V-shaped brush made of soft wool suitable for tiles, marble, and wood floors. Also
includes a rear brush made of rubber suitable for carpet deep cleaning.
The 3D conditioning level filter (effectively preventing clogging when the dustbin is close to
full) + HEPA filter prevent secondary air pollution. The dust bin and 3D filter can be
washed directly.
Hovo 780 model package includes two dust bins:
Patent intelligent programmable water tank (for Hovo 780 only)
The cleaner has an interchangeable roller brush and suction inlet designed to avoid getting
tangled on carpet. Refer to page 15-17 for details on swapping between the suction inlet
and the roller brush.
Product Features
The suction power of the cleaner is up to 40W and can pick up fine dust on turbo mode.
When the cleaner detects lots of dirt, it will adjust the suction power automatically, which
greatly improves the cleaning efficiency saves as much as 30% on electricity on normal
mode.
When detecting dirt or debris, the cleaner will automatically increase suction power. When
dust bin is full, the cleaner will give a voice alert and light up the " " icon on the display
panel.
Intelligent suction adjustment
Dirt detection
Swap between suction and sweeping (not included for Hovo 700 or Hovo 750)
Product Anatomy and Accessories
This product is for home use only and can clean a variety of household floors including: low
pile carpets, wood, and ceramic tile, etc.
Virtual blocker x 1
(not included for Hovo 700
or Hovo 750)
Mop attachment x 1
(not included for Hovo 700
or Hovo 750)
AC adapter x 1 Mop pad x 2
(not included for Hovo 700
or Hovo 750)
Suction inlet x 1
(not included for Hovo 700)
User manual x 1
Main Unit and Accessories
HEPA filter x 1
Side brush x 4
(Please install two
on the cleaner before use)
Small dust bin x 1
(for Hovo 780 only)
Water tank x 1
(for Hovo 780 only)
Cleaning brush x 1
(Mounted on the dust bin)
The unit works on a rechargeable lithium-ion battery and microcomputer control. It is an
intelligent vacuum cleaner that features UV sterilization, various automatic cleaning modes,
vacuuming, wet mopping with water seeping speed control, scheduled cleaning, remote control,
and automatic recharging.
Top View
Bottom View
Dustbin cover
Exhaust outlet
Manual charging port
Signal Receiver
Cliff sensor
Front wheel
Charging contact
Charging contact
Right side brush
Left side brush
Cliff sensor
UV lamp
Mop attachment with
mop pad
Cliff sensor
Lifting bracket
Roller brush
Product Anatomy and Accessories
Anatomy of the Main Unit
Unit Display Panel
Press this button and the cleaner will start automatic cleaning until the power is low, at
which point it will automatically return to the auto charging dock station. During the
course of cleaning, touch this button and the cleaner will stop.
When this indicator is on, the unit is in Spot cleaning mode with a 10 square foot spiral
pattern for approximately 2-3 minutes; during the cleaning process, press any button
on the remote control to stop.
Press the " " on the remote control and the cleaner will seek the docking station for
charging.
Press the TIMER " "button and SPOT " " button on the remote control. The " "
icon on the display panel will light up, and the cleaner will enter into the current day/
hour/minute setting and schedule day/hour/minute setting (see page 12 for the clock
and schedule cleaning settings).
When the cleaner is on standing by, press the " " + " " button on the remote
control to turn off/turn on the UV lamp. (For details, see page 11.)
Attention: By default, UV sterilization is turned on.
Before charging be sure to turn the power switch to ON.
Before cleaning, tidy up any small items or obstacles in the area, especially any
power cords or other clutter.
When the battery is low during cleaning, the cleaner will stop, beep five times, light
up the recharging icon, and automatically return to the auto charging dock
station.
Attention
When the cleaner is on standby, press the " XXL " button on the remote control and the
cleaner will enter FULL GO mode. In this mode, the cleaner will automatically clean one
more time after the battery is fully charged and cleaning schedule is set.
When the cleaner is on standby, press the " " button on the remote control and the
cleaner will enter wall follow cleaning mode.
Unit Display Panel
Installing the Battery
FULL GO indicator
Dust bin full indicator
When the " " icon lights up, it indicates that either the dust bin is full, the suction
inlet is clogged, or the dirt sensors are covered with dust.
Wall follow cleaning indicator
Water seeping speed indicator (for Hovo 780 only)
First, install the small dustbin with the water tank (refer to page 18 to install). The
cleaner will automatically enter into wet mopping mode. Press the " " button to
start auto cleaning & mopping and the " " will light up or blink.
When the water tank runs out of water, this icon will turn off, display error code E012
and announce: “inject water, please”. To continue this function during cleaning, take
out the water tank and refill with water or cleaning solution. The indicator is normally
steady on in the default mode, blinking indicates it is in fast water seeping speed
mode (See page 11 for more).
Attention
It is recommended to clean dust off of the suction inlet and dirt sensor when
emptying the dust bin.
When the unit is cleaning, its path follows the default settings until it detects any
dirt, then it will automatically switch to Spot cleaning.
To maximize the wet mopping effect, please fill the water tank to the fullest.
1. To install the battery, use a screwdriver to loosen the four screws on the half-moon shaped
bottom shell, and remove the battery cover (see Fig.1).
2. When installing the battery, connect the snap joints of the two terminals (see Fig. 2).
3. If the cleaner is left unused for a long time, recharge it once a month on a regular basis to
maintain the battery for optimal use.
4. The battery can only be replaced with a battery from the original manufacturer, otherwise it
may cause damage to the main unit and void warranty.
Negative
recharging contact
Product Operations and Settings
Auto Charging Dock Station
Positive recharging contact
1. Securely mount the charging station on flat ground
and a wall near and perpendicular to the ground.
2. Avoid obstacles and uneven areas within 6 ft in front
of the docking station and 3 ft on both sides.
3. If the infrared signal emission window of the
charging station is blocked, the cleaner will be
unable to find the charging station for charging.
4. Plug power cord to power adapter jack first and then plug AC adapter to wall outlet (see
Fig 1 and 2).
5. Keep the power cord clear of the charging station and do not leave the power cord on the
ground (see Fig 3).
6. Press HOME on the remote control, then the cleaner will return to the charging station to
recharge the battery.
＊＊After battery is fully charged, cleaner will move out from charging dock recharging contacts＊＊
3 ft 3 ft
6 ft
A. Auto charging via charging dock station
Plug AC adapter power cord to the manual charging port on unit first, then plug AC adapter
to wall outlet next. Make sure to turn on cleaner power switch to recharge battery. It takes
about 3 hours to fully charge a low power battery.
B. Manual charging battery
Ce manuel convient aux modèles suivants
2
Table des matières
