Hotpoint Ariston SD1511 Instructions d'utilisation et d'installation

Indesit Company UK Ltd

Service

Information

FREESTANDING

LARDER

FRIDGES

Model Comm.

Covered Code

Energy Band 'A' Models

SD1511 44302

SD1513 44303

SD1711 44308

SD1711V 47201

SD1712V 47203

Energy Band 'A+' Models

SD1521 44301

SD1522 47204

SD1522HA 53532

SD1721 44306

SD1721VHA 53528

SD1722J 44307

SD1722JHA 53531

SD1722VHA 53530

SD1723 44305

SD1746 44304

5407366 Issue 3 April 2011

C00196081

2 of 17

Service Manual UK

Indesit

Company

English

HEALTH AND SAFETY

For the servicing of refrigeration products, containing Isobutane R600a refrigerant.

These instructions are in addition to any other Company procedures already published.

Published primarily for Indesit Company engineers working in the UK or Southern Ireland,

for which these instructions are MANDATORY.

1. Only engineers who have been trained on the safe handling of Isobutane R600a refrigerant are

authorised to transport, store or carry out system repairs.

2. This manual is not intended as a comprehensive repair/maintenance guide to the appliance.

3. Must only be used by suitably qualified persons having technical competence, applicable

product knowledge, suitable tools and test equipment.

4. Servicing of electrical appliances must be undertaken with the appliance disconnected

(unplugged from the electrical supply).

5. Servicing must be preceded by earth continuity and insulation checks, plus refrigerant leak

detection.

6. Personal safety precautions must be taken to protect against accidents caused by sharp edges

on metal and plastic parts.

7. After servicing, the appliance must be rechecked for electrical safety.

8. Smoking, naked flames, or operating gas and/or electrical equipment (including cordless power

tools) are forbidden within the storage area, working area and vehicles used to transport

Isobutane.

9. The carrying case for the scales and refrigerant must display a red flammability label

Part Number C00247960 (8100063) that should be visible and readable at all times.

10. The vehicle and storage area must be ventilated as far as is reasonably practicable and the

aluminium case kept out of direct sunlight. The storage temperature of Isobutane should not

exceed 50°C.

11. The vehicle transporting Isobutane (R600a) refrigerant must display a Red Flammable Gas

warning sticker (Part Number C00247960 [8100063]).

12. Engineers should not wear clothes that are liable to cause static discharge ('electrostatic

sparking').

13. Avoid working in small rooms.

14. Do not work in cellars.

15. Whenever possible move the appliance into a larger open area away from possible ignition

sources.

16. Request the customer to turn off all other electrical and gas appliances in the near vicinity of the

repair and note that it is done.

Customers should be advised to restrict activity within the near vicinity for a short time.

17. Isobutane refrigerant must be vented to atmosphere, (outside of the premises e.g. via open

window through the clear plastic hose supplied).

18. Isobutane is heavier than air and must not be vented within 3 metres of the following: sewer

cover, cellar, drain or any similar construction lower than ground level, boiler air inlet/outlet, or

near any possible source of ignition.

continued...

3 of 17

Indesit Company

Service Manual UK English

HEALTH AND SAFETY

19. Working with a naked flame i.e. soldering or brazing is forbidden. Unless otherwise stated,

pipework connections must only be made using the Lokring coupling system.

20. Electronic leak detectors with high voltage tips must NOT be used with any Isobutane (R600a).

21. All equipment used for this activity must be checked regularly and maintained in a safe working

condition; parts must be replaced as required.

Information Regarding Isobutane Canisters

1. The maximum quantity of Isobutane an engineer should hold or store at any one time is two 1kg

net aluminium canisters, supplied individually as Part Number C00218421 (2602600).

2. Canisters must be stored inside the aluminium case with the weighing scales for protection from

possible damage and heat. The aluminium case must NEVER be placed next to a heat source or

in direct sunlight.

3. Isobutane must only be dispensed to the appliance from the 1kg net aluminium canister placed

in an upright position on the weighing scales provided.

4. All used canisters must be a returned as scrap and therefore, left out for the driver to collect and

return for disposal.

5. Canisters must not be punctured or the internal valve damaged.

6. Before storing the canister it must have the extraction tap valve removed and the internal valve

of the canister checked for leakage using leak detector (Leak Detector: Part Number C00222861

[5700043]).

7. All used canisters and those found to be leaking should be exhausted to atmosphere to ensure

they are emptied completely. Refer to the following paragraph.

8. Refit the extraction tap if necessary, open the tap and then invert the canister.

This must be done outside in open air away from buildings and ignition sources and complying

with Item 18 on previous page.

STABILITY BRACKET

The stability bracket MUST be fitted to the wall or floor behind every 17** fridge model.

Full instructions are published in the customer instruction book.

THERMOSTAT REPLACEMENT

All replacement thermostats must have the capillary phial taped/insulated where it is routed past any

electrical terminations, in the same way as the original one fitted to the appliance.

Replacement thermostats will not have the insulating tape already fitted and this MUST be done

before the work is completed.

4 of 17

Service Manual UK

Indesit

Company

English

CONTENTS

Health & Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3

Index & Serial Number / Product Identity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7

Product Description with Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Door Reversal Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 11

'J' Models ~ Joining Kit Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 - 13

Wiring Connection Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3 Terminal Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Theoretical Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

PRODUCT IDENTITY

Mod. - - - - - -

Cod.

93139180000 S/N 704211801

220 - 240 V- 50 Hz 150 W W

Fuse AMax 15 w

Total

Gross

Bruto

Brut

Compr.

Kompr.

Syst. R134a

kg 0,090

Gross

Bruto

Brut

340

Net

Util

Utile

Gross

Bruto

Brut

Freez. Capac

Poder de Cong

Made in - - - - 13918

Test

P.S-I.

Pressure

HIGH-235

LOW 140

kg/24 h

4,0

Class

Clase

Classe

Example

1Industrial Code:

93 13918 0000

0000 original production

Commercial Code*

Factory of origin

2Serial Number:

704 1801

Build number that day, e.g. 1801th built

Day of manufacture, e.g. 21st of month

Month of manufacture, e.g. April

Year of manufacture, e.g. 2007

*Vital for correct model information and system identification

Other numbers denote major production changes

5 of 17

Indesit Company

Service Manual UK English

MODEL INTRODUCTION

The models included in this publication are 1500 and 1700 mm high larder fridges, introduced in

March 2007. All models are similar with regard to the furniture design, but there are variations for

energy-banding (A and A+), exterior colour and 'V' models that have an air circulation fan in the

fridge compartment.

For banding and colour information, refer to the Front Cover and/or Specifications page.

The appliance is 'wet wall' design so defrosting is automatic, with the water draining into a gutter and

a dissipator. Doors are reversible but do require a T20 Torx key to remove the plinth/kick strip.

A thermostat mounted behind the control panel/top facia controls the temperature; the door switch is

also mounted in the same area.

JOINING MODELS & JOINING KIT OVERVIEW

Model numbers with the suffix 'J' (= JOINING) at the end, signify that the model can be joined/linked

to the freezer. Example: SD1722J joined to UP1722J.

A joining kit is available and full instructions will be included with the kit. Similar instructions are also

published in this manual.

When installing and joining these models together, the larder fridge must always be on the right

hand side with the matching freezer on the left hand side. The fridge is supplied with the door hinged

on the right hand side whereas the freezer door will be on the left hand side, i.e. both grab handles

positioned in the middle.

The reason for the positioning is that the freezer has extra system pipework routed up and down,

close to its right hand side panel. The affect of this, is to warm the side panel and in doing so,

removing the risk of cross-ambient temperatures between the fridge and freezer, which would

otherwise cause condensation.

ANTI-BACTERIA (Hygiene Control)

Some models have anti-bacteria protection (hygiene control) - built in protection for life of the

product. Food safety is becoming increasingly important to consumers with more and more cases of

food poisoning.

The hygiene control is built into the plastic of the fridge interior during manufacture so it cannot wash

or wear out. It provides permanent protection against bacteria as it reduces on contact the spread of

food poisoning bacteria, which can cause contamination and odour.

It gives extra hygiene reassurance as it kills or inhibits the growth of any bacteria, which may come

into contact with the interior surfaces of the fridge.

The anti-bacteria protection is approved safe for use in food contact applications by the European

Scientific Committee for Food and has proven safe over many in personal care and household

cleaning products.products.

6 of 17

Service Manual UK

Indesit

Company

English

SPECIFICATIONS

GENERAL:

Manufactured in Great Britain:

Appliance Type Larder Fridges

Static / Frost Free Static

Door Reversibility Yes

Plug/Cable EU / 1.6M

Noise Level ’A’ band models ~ 42dB - ’A+’ band models 40dB

Climate Class (Rating Plate) ’A’ band models ~ SN.N.ST = 10°C to 38°C

’A+’ band models ~ SN.N.ST.T. = 10°C to 43°C

Refrigeration Type Static / Wet Wall (V models = Include a ventilation fan)

DIMENSIONS & WEIGHT:

Models: SD15** SD17**

Height: 1500 mm 1750 mm

Width: 600 mm 600 mm

Depth: 655 mm 655 mm

Weight Gross: 54.4 kg 60.1 kg

Weight Net: 51.4 kg 57.3 kg

CAPACITIES / VOLUME:

Gross Volume Net Volume

Fridge: SD15** 290 litre 288 litre

Fridge: SD17** 350 litre 348 litre

Colours Introduction Date - March 2007

Polar White

SD1511 SD1521 SD1711 SD1711V

SD1721

SD1721VHA SD1746

Argento Vivo SD1513 SD1723

Inox SD1522

SD1522HA SD1712V SD1722J SD1722JHA SD1722VHA

'V' = Ventilation Fan 'J' = Joining models – SD & UP1722J

'HA’ = Hotpoint / Ariston brand - Introduction April 2008.

7 of 17

Indesit Company

Service Manual UK English

TECHNICAL DATA:

Power Supply Voltage: 220/240 V

Power Supply Frequency: 50 Hz

Absorption Current: Normal Operation 0.8 Amps

COMPRESSOR WINDING :

Manufacturer: ACC/ZEM TECUMSEH

Type I/D: HTK55AA-2 THG1340MKS

Winding Resistance :

Start: 30.3 28.4

Run: 31.9 25.9

Refrigerant/ Grams: R600a - Refer to the appliance rating plate

ENERGY:

Model: SD15** SD15** SD17** SD17**

Energy Class: A A+ A A+

Power Consumption kWh/24hr: 0.46 0.37 0.48 0.39

Annual Consumption kWh/yr: 170 135 175 142

FRIDGE FAN MOTOR (SD1722V and SD1722VHA MODELS ONLY

Voltage: 220/240 V

Frequency: 50 Hz

Power 3.5 W

8 of 17

Service Manual UK

Indesit

Company

English

DESCRIPTION OF APPLIANCE:

Temperature

Control

Removable Lidded

Shelf with Egg Tray

Bottle Shelf

Removable

Multipurpose

Shelves

Levelling Feet

Fruit and

Vegetable Bin

9 of 17

Indesit Company

Service Manual UK English

NOTES

10 of 17

Service Manual UK

Indesit

Company

English

DOOR REVERSAL (All models except SD1722J and SD1722JHA)

OLD AESTHETIC DOOR (ORIGINAL) & NEW AESTHETIC DOOR (STANDARD)

All the images below refer to the door with new aesthetics unless otherwise stated.

Important Notes for Guidance:

Before commencing any work refer to the Safety Notes at the beginning of this manual. Read the

instructions on the next page fully and refer to the diagrams below before carrying out the door

reversal. Also, before commencing the door reversal, you will require the left door closure aid

normally supplied loose with the literature pack that comes with the appliance. If the closure aid is not

available then it will need to be ordered before proceeding.

OLD AESTHETICS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hotpoint Ariston Réfrigérateur

Hotpoint Ariston

Hotpoint Ariston SDS 17xx J Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston HAQ9 E1L Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston E4D series Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston MBL 2011 CS Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston NMTL 1912 FW Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston NMBL 1922 CVW/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston BDR 190 AAI/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston EBD 18 F Series Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston MTM 1901 F/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston E2BYH 19 F O3 Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston W4D7 Series Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston MBZE 45 NF BAR/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston SBLxxxxNF Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston RMBH 1200F Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston BDZ L 330 IX/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston RMBA 1167 Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston MTM 1911 F Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston XH8 series Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston NMTM 1911 V HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston EBM 1 Series Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston MBL 2011 CS/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston NMBL 1920 FW/HA Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston BMTM 1721 V Manuel utilisateur

Hotpoint Ariston

Hotpoint Ariston 4D X T (TVZ)/HA Manuel utilisateur

Manuels Réfrigérateur populaires d'autres marques

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuel utilisateur

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuel utilisateur

Sharp

Sharp SJ-BA31IEXW2-EU Manuel utilisateur

CORBERO

CORBERO CC2300MCW Manuel utilisateur

KitchenAid

KitchenAid 2205264 Manuel utilisateur

Stengel

Stengel KU 1101 A++ Manuel utilisateur

NEFF

NEFF KI181 Series Manuel utilisateur

Hoshizaki

Hoshizaki Reach-In Manuel utilisateur

Amana

Amana ASD2524VES00 Manuel utilisateur

BOMANN

BOMANN KGC 213 Manuel utilisateur

Danby

Danby DAR044A1SLDD Instructions de montage

Samsung

Samsung RF323TE Manuel utilisateur

Beko

Beko CSA31022 Manuel utilisateur

IKEA

IKEA FROSTIG C 185 E Manuel utilisateur

Electrolux

Electrolux ER 6821 D Manuel utilisateur

True

True TS-28 Manuel utilisateur

Frigidaire

Frigidaire FSC23R5DW9 Manuel utilisateur

Beko

Beko LSP4579W Manuel utilisateur