Hotone Binary IR Manuel utilisateur

DESIGN INSPIRATION

Binary IR Cab Owner's Manual

DESIG N IN SP IRATION

Congratulations on your new Hotone Binary pedal! You have just added some serious power to your pedalboard.

The Binary series lets loose versatile pro effects in compact cases. A dual-DSP powered platform and CDCM modeling system

ensure a realistic playing experience, dual-footswitch design and variable I/Os make it easy to use, and an OLED screen offers

clear, detailed display.

Binary IR Cab is an Impulse Response based cabinet simulator delivering precise legendary vintage/modern guitar/bass cab sounds

along with CDCM powered legendary studio microphone/power amp simulations.

Welcome

DESIG N IN SP IRATION

✪ Grown out of next-gen XTOMP technology

✪ Compact, easy-to-use dual footswitch IR cabinet simulator pedal

✪ Advanced CDCM modeling system ensures realistic playing experience

✪ Dual DSP-powered platform ensures high sound quality

✪ 24-bit A/D/A conversion, up to 110dB S/N ratio

✪ 100 legendary cab models

✪ 10 CDCM based legendary studio microphone simulations

✪ Detailed mic position (X, Y, Z) and room simulations

✪ 8 CDCM based power amp simulations with presence control

✪ Supports 3 party IR files

✪ USB jack for firmware upgrading, loading/managing IRs with free PC/Mac software

✪ Aux in and headphone output for practicing and jamming

✪ 100 Presets

✪ Built-in OLED screen with clear display

✪ 5 transparent knobs with LEDs

✪ 9V DC power supply

Features

DESIG N IN SP IRATION

1-2. ▽/△: For selecting presets, bypass/mute, and other parameters.

3. +/- buttons: For selecting effects and adjusting parameters.

4. GLOBAL: For power amp and room control settings.

5. SAVE/EXIT button: For saving or canceling parameter changes.

6. OLED screen: Shows bank/patch numbers, setting values and other operation info.

7. VOL: Controls effect output level.

8-10. MIC POSITION X/Y/Z: Controls the mic position simulations.

11. MIC POSITION: Selects (or turns off) different microphone simulations.

12. INPUT: 1/4” (6.35mm) mono jack, for plugging in instruments or other effects.

13. AUX: 1/4” (6.35mm) stereo jack, for plugging in audio players.

Note: You can hear only left channel signal when using along with OUTPUT jack.

14. PHONES: 1/4” (6.35mm) stereo jack, for connecting headphones.

15. OUTPUT: 1/4” (6.35mm) mono jack, for connecting to audio interfaces, mixers or

other effects.

16. USB jack: Mini USB jack, for effects editing, firmware updates, and factory reset.

17. DC 9V: Plug in your power supply here (DC 9V, center negative).

Panel Introduction

DESIG N IN SP IRATION

Note: TURN ON FIRST, TURN OFF LAST. Always mute the mixer/audio interface before plugging or unplugging power jacks, cables, etc. When you're

using a mixer or an audio interface, please adjust the onboard knobs carefully to avoid signal clipping.

Connections

DESIG N IN SP IRATION

Display

Plugging in your power supply will turn on the device. The main display will come up as shown below:

1 - Current bank/patch number

2 - Indicates the cab model you’re using in current patch

DESIG N IN SP IRATION

Select a Patch

Tap either ▽/△ footswitch once to change patches (hold one footswitch to switch patches quickly). Tap △ footswitch repeatedly

to cycle through patches in the order 00, 01, 02,03, …, 99, then 00. Tap ▽ footswitch to change patches in the opposite order.

DESIG N IN SP IRATION

Bypass/Mute

Tap both ▽/△ footswitches at the same time.

To set the unit to bypass: release the footswitches within 2 seconds.

To set the unit to mute: hold the footswitches more than 2 seconds until “MUTE” appears on the screen.

Tap both ▽/△ footswitches again to go back to normal.

In Bypass/Mute status, all the LED knobs will go out.

Note: AUX IN will not be muted in MUTE status.

DESIG N IN SP IRATION

Edit

1. Adjust the parameters

Use the onboard knobs to adjust the effect parameters. The screen display will be shown as below when adjusting:

1 - Current parameter value you’re adjusting (shown: volume)

2 - Saved parameter value in the current patch (PREV. = Previous value)

The MIC POSITION X/Y controls the microphone horizontal/vertical position, set X=Y=0 to set the microphone on axis; Z controls

the distance between microphone and speaker cap.

The MIC TYPE lets you select a microphone type you like. Turn this knob to minimum to turn off microphone simulation.

DESIG N IN SP IRATION

Edit

2. Select a different effect

Use the +/- button to change to another cab sim (hold for fast changing):

The inverted bank/patch number indicates that the current patch has been edited.

Table des matières

Autres manuels Hotone Pédale musicale

Hotone

Hotone Skyline Wally Manuel utilisateur

Hotone

Hotone Ampero Manuel utilisateur

Hotone

Hotone AMPERO II STAGE Manuel utilisateur

Hotone

Hotone Ampero Manuel utilisateur

Hotone

Hotone Binary Eko Manuel utilisateur

Hotone

Hotone PRESS Series Guide de démarrage rapide

Hotone

Hotone OMP-6 Manuel utilisateur

Hotone

Hotone JOGG Instructions de montage

Hotone

Hotone Omni IR Manuel utilisateur

Hotone

Hotone TAPE EKO Manuel utilisateur

Hotone

Hotone Ampero Manuel utilisateur

Hotone

Hotone Binary Amp Manuel utilisateur

Hotone

Hotone Binary Mod Manuel utilisateur

Hotone

Hotone BINARY Manuel utilisateur

Hotone

Hotone A STATION Manuel utilisateur

Hotone

Hotone Soul Press II Manuel utilisateur

Manuels Pédale musicale populaires d'autres marques

Behringer

Behringer ULTRA WAH UW300 Manuel utilisateur

Whirlwind

Whirlwind oc-bass Manuel utilisateur

Strymon

Strymon Lex-rotary Manuel utilisateur

Behringer

Behringer PB600 Manuel utilisateur

Lexicon

Lexicon MX200 Manuel utilisateur

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuel utilisateur

Matthews Effects

Matthews Effects Whaler V2 Manuel utilisateur

Grid 1

Grid 1 Pedal Jeanie Manuel utilisateur

Amptweaker

Amptweaker tightboost Manuel utilisateur

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuel utilisateur

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuel utilisateur

BYOC

BYOC Analog Chorus Manuel

Dimavery

Dimavery EPVP-50 Manuel utilisateur

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuel utilisateur

Pro-MIDI

Pro-MIDI G25 Manuel utilisateur

DW 7000 Manuel utilisateur

FAMC

FAMC Liquid-Foot Jr. Series Manuel utilisateur

Dimavery

Dimavery EPOD-50 Overdrive Manuel utilisateur