Hot Wheels Ai Manuel utilisateur
©2016 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697. Mattel U.K.
Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory
Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852)
3185-6500. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200
Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax: 03-78803867.
REQUIRES 3 X AA & 3 X AAA
BATTERIES (NOT INCLUDED).
DISPOSE OF BATTERIES SAFELY.
12
8+
service.mattel.com
ASST.FBL85
FBL86-0970-G1
CAUTION:
To prevent entanglement, keep all hair
away from the wheels.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
COLORS AND DECORATIONS MAY VARY.
Protect the environment by not disposing of this product with
household waste [2012/19/EU]. Check your local authority for recycling
advice and facilities.
In exceptional circumstances batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
•
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FOR PRODUCT SOLD IN USA
211
1
1
HOT WHEELS®Ai SMART CAR
GAMING CONTROLLER
TURBO DIESEL-
THIS STREAMLINED PICKUP IS BUILT TO HURTLE
AROUND THE TRACK AT MAXIMUM SPEED
HERE’S YOUR NEW Ai SMART CAR & CONTROLLER BATTERY SAFETY INFORMATION
310 3
1. CONNECT THE VEHICLE AND PUSH THE
BUTTON.
2. TOGGLE THE STEERING STICK LEFT OR RIGHT UNTIL YOU HEAR: “FACTORY RESET”.
3. PUSH THE BUTTON.
5. A SERIES OF ‘BEEP’S WILL PLAY TO CONFIRM YOU HAVE RESET
YOUR CONTROLLER TO ORIGINAL FACTORY STATUS.
4. AFTER YOU HEAR THE “WARNING: FACTORY RESET” VOICE PROMPT,
PRESS THE BUTTON AGAIN TO CONFIRM.
HERE’S HOW!
YOU CAN RETURN YOUR CONTROLLER TO THE ORIGINAL FACTORY SETTINGS AT ANY TIME.
• OPEN AND CLOSE THE BATTERY COVER WITH A PHILLIPS HEAD SCREWDRIVER (NOT INCLUDED).
• EACH RACE VEHICLE REQUIRES THREE 1.5V AAA BATTERIES.
• BATTERIES NOT INCLUDED. DISPOSE OF BATTERIES SAFELY.
• OPEN AND CLOSE THE BATTERY COVER
WITH A PHILLIPS HEAD SCREWDRIVER
(NOT INCLUDED)
• EACH CONTROLLER REQUIRES THREE 1.5V AA BATTERIES.
• BATTERIES NOT INCLUDED. DISPOSE OF BATTERIES SAFELY.
PREP YOUR RACE VEHICLE
PREP YOUR GAMING CONTROLLER
FACTORY RESET
“WARNING:
FACTORY RESET”
• IF CONTROLLER IS ACCIDENTALLY DROPPED IN THE WATER, REMOVE BATTERY(S) AND ALLOW
CONTROLLER TO AIR DRY. REPLACE WITH FRESH BATTERY(S) BEFORE OPERATION.
• PLAY SAFELY! – DO NOT DRIVE VEHICLE ON COARSE SURFACES, OFF-ROAD OR IN THE STREET!
HINTS AND TIPS ON HOW TO OPERATE THE TOY SAFELY
49
CONNECT YOUR GAMING CONTROLLER AND VEHICLE
NOTE: Make sure you have correctly installed the batteries in both your vehicle and controller (see page 3).
THE ACTION STARTS ONCE YOU POWER ON YOUR CAR AND CONTROLLER.
NOTE: You can reset the language at any time by powering off the controller and turning it
back on while pressing down on the button.
Use the STEERING STICK to toggle left and right
until you hear the language you want to play in.
If playing for the first time (or after loading a new set of batteries)
you will be asked to select a language.
Press the button to POWER ON your controller.
Press the button to select.
1
2
3
4
TROUBLESHOOTING
Turn the vehicle power switch to I.
Listen for the voice prompt from the
controller to confirm:
5 6
“VEHICLE AND
CONTROLLER
CONNECTED”
I O
Symptom Cause Solution
Batteries are low or faulty Replace old batteries with high quality
alkaline batteries
Vehicle and/or controller
continually switches off or
restarts
Vehicle batteries are low Replace old batteries with high quality
alkaline batteries
Vehicle running slowly/controller
says "Vehicle Batteries Low"
Vehicle batteries low (likely) or
controller batteries low (possible) Replace vehicle batteries, if the
problem persists, replace controller batteries
Controller says
"Connection Lost"
Vehicle will not pair
with the controller Batteries in the vehicle or
controller are low on power Replace old batteries with high quality
alkaline batteries
Incorrect language set at
startup Switch on the controller while holding
down the 'X' button
The controller is not speaking
the language I require
Controller may be set to low
volume Increase volume in the system
settings menu (see page 5)
Controller volume is low
Steering out of alignment Adjust steering alignment (see page 8)Vehicle does not drive straight
in Freeplay mode
Vehicle tires/body not fitting correctly Check tires are securely on the wheel
covers/Check body shell is properly
attached to the chassis
Vehicle does not steer properly
Controller frequently says
“Connection Lost”
after replacing all batteries
Interference from other 2.4GHz
equipment including WiFi Turn off or move away from other sources
of 2.4GHz transmissions
58
USE YOUR GAMING CONTROLLER
Ai SYSTEM CARE
The
GAMING CONTROLLER
gives you the power to control your vehicle and set up the race!
Your
GAMING CONTROLLER
and
SMART CAR
come ready to race right out
of the box — use it the way it is or tweak its performance.
ADJUST STEERING
See page 8
FACTORY RESET
See page 10
SPEAKER VOLUME
o
o
o
o
• Press the
button.
• Use the STEERING STICK to toggle left and right through the editable settings.
POWER
STEERING STICK /
TOGGLE SETTINGS
AUTODRIVE MODE*
*
*
*
*
SETTINGS
CHOOSE SKILL LEVEL
FREEPLAY MODE
PRACTICE MODE
*
CHAMPIONSHIP MODE
These controls can only be used when racing on HOT WHEELS
®
SMART TRACK
TM
.
HAZARD TRIGGER
EXIT /
RETURN SELECTION CONFIRM SELECTION
THROTTLE
§
§
§
§
§
§
§
ENGINE SOUNDS
Toggle left and right to turn engine sounds ON and OFF.
Then press the button.
Toggle left and right to adjust the controller volume from 1 to 5.
Then press the button.
CUSTOMIZE GAMING CONTROLLER SETTINGS
For the best Hot Wheels®Ai performance, always keep your Ai Race System in prime operating condition.
— Use a clean damp cloth when cleaning the vehicle body and tires.
• Keep your SMART CARS tires and chassis clean.
VEHICLE CARE
— Use a clean dry cloth when wiping down your chassis and track sensors.
DAMP CLOTH
DRY CLOTH
ADJUST STEERING ALIGNMENT
FROM TIME TO TIME (ESPECIALLY AFTER YOU CRASH), YOU MAY NEED TO ADJUST THE STEERING
ON YOUR HOT WHEELS®Ai VEHICLES. IT’S EASY!
• Once you are done, press the button to return to the main menu.
1. CONNECT THE VEHICLE AND PUSH THE BUTTON.
2. TOGGLE THE STEERING STICK LEFT OR RIGHT UNTIL YOU HEAR: "ADJUST STEERING".
3. PUSH THE BUTTON AND FOLLOW THE VOICE PROMPTS.
4. DRIVE YOUR SMART CAR SLOWLY BACKWARD AND FORWARD WITHOUT STEERING TO SEE IF
IT RUNS TOWARDS THE LEFT OR RIGHT.
5. CORRECT THE STEERING BY PUSHING THE STEERING STICK IN THE OPPOSITE DIRECTION OF
THE WAY THE SMART CAR RUNS TOWARDS.
6. EACH TIME YOU TURN THE STEERING STICK LEFT OR RIGHT, YOU WILL HEAR A ‘BEEP’ THAT
CONFIRMS YOU HAVE ADJUSTED THE STEERING ONE NOTCH IN THAT DIRECTION.
6 7
UNLOCK NEW RACES! USE YOUR Ai SMART CAR WITH THE HOT WHEELS®
Ai SMART TRACKTM (SOLD SEPARATELY)
TO EXPLORE 3 DIFFERENT RACE MODES!
MORE WAYS TO RACE
AUTODRIVE MODE
Ai SMART CARS race around the track entirely on their own!
PRACTICE MODE
Hit the track with your fastest lap time!
CHAMPIONSHIP MODE
Compete against friends or challenge Hot Wheels®Ai-controlled vehicles to an EPIC race!
FREEPLAY MODE
With
Hot Wheels®Ai
you can race how YOU want, on-track or off. You’re in control!
•
Press the RC button to engage Freeplay mode.
• You can exit Freeplay mode at ANY time, simply press the button to Exit.
When asked if you want to EXIT mode, press the button.
• Race wherever you like without the Ai track assistance.
NOTE: Hot Wheels
®
Ai vehicles contain advanced sensors that read the SMART TRACK
™
pieces.
Vehicles are not recommended for rough terrain or outdoor play.
RACE ON WOODEN FLOORS!
RACE ON TILE FLOORS!
VEHICLE CUSTOMIZATION
DETACH ATTACH
CHANGING VEHICLE WHEEL COVERS
DETACH ATTACH
Hot Wheels
®
Ai lets you customize your race vehicle by swapping SMART CAR frames and wheel covers.
0678
1
2
3
4
Autres manuels pour Ai
1
Table des matières
Autres manuels Hot Wheels Jouet
Hot Wheels
Hot Wheels CONSTRUCTION ZONE CHAOS Manuel utilisateur
Hot Wheels
Hot Wheels Star Wars Death Star Battle Blast Manuel utilisateur
Hot Wheels
Hot Wheels TURBO RACE Manuel utilisateur
Hot Wheels
Hot Wheels PIT STOP STATION Manuel utilisateur
Hot Wheels
Hot Wheels Color Shifters Ultimate Gator Carwash Manuel utilisateur
Hot Wheels
Hot Wheels Centriforce Launcher X0163 Manuel utilisateur
Hot Wheels
Hot Wheels Jumbo Stunt Box Manuel utilisateur
Hot Wheels
Hot Wheels City GKT86 Manuel utilisateur
Hot Wheels
Hot Wheels Scorpion sting Manuel utilisateur
Hot Wheels
Hot Wheels PIRATE TAKEDOWN Manuel utilisateur
Hot Wheels
Hot Wheels SPIRAL SPIN-OUT M2606-0920 Manuel utilisateur
Hot Wheels
Hot Wheels TRACK BUILDER SYSTEM POWER BOOSTER KIT Manuel utilisateur
Hot Wheels
Hot Wheels Color Shifters City Flame Fighters Manuel utilisateur
Hot Wheels
Hot Wheels DWM85 Manuel utilisateur
Hot Wheels
Hot Wheels STUNT & GO Manuel utilisateur
Hot Wheels
Hot Wheels SUPER SPEED BLASTWAY Manuel utilisateur
Hot Wheels
Hot Wheels MINECRAFT GHAST ATTACK TRACK Manuel utilisateur
Hot Wheels
Hot Wheels TRACK BUILDER SYSTEM DJD68 Manuel utilisateur
Hot Wheels
Hot Wheels 47570 Manuel utilisateur
Hot Wheels
Hot Wheels ENERGY TRACK Manuel utilisateur
