Feature Action Gesture Detail
LED Backlight
Voice Response
Favorites
Horizontal watch reading
Watch reading +
tap two times
Raise hand to ear
Move hand to the horizontal watch reading
position, tilting towards you for one second.
Move the hand to the horizontal watch reading
position, tilting towards you for one second.
After the backlight is On, move your hand to ear
Move the hand to the horizontal watch reading
position, tilting towards you for one second.
After the backlight is On, rotate your hand so
that the audio module is facing you.
Miscellaneous
● To make a call, dial the number on the
dial screen and tap on the dialed
number to activate call.
● The text typing screen for SMS text
reply or Facebook comment reply uses
a T9 style keyboard. Type the desired
text using the keyboard touch the text to
send out. (Only Android and Windows users
can respond to texts using keypad, iOS
users can use Siri to respond to texts)
● The charger has a magnetic connector
and is attracted to steel surfaces.
When the charger cable is connected
to a power source, make sure that the magnetic
side is not close to any metal surfaces. While teeth
are provided to prevent a short circuit on the
connector, the angular contact of the connector can
still create a short circuit.
● At Midnight 12 , HOTWatch
connections are cleaned up.
Phone Switching
When making or receiving a call from the watch, the
call stays on the watch. It can be transferred to the
phone by tapping on the headset button on the
phone. When making a call from the phone, the
default behavior of the phone is to push the call to a
Bluetooth device (HOT Watch in this case), but the
watch pushes the call back to phone (as user is not
using watch to dial-out). This will make sure that the
call will stay on the phone when the call is made
from or received from the phone. However, some
Android phones do not work well with this call
pushback. They tend to push the call back to watch.
This can cause automatic call switch to watch
during a normal phone call. To overcome this
problem, a special setting “EnbleBtOff” is provided
on the watch’s Settings screen to switch off the
Bluetooth (only call audio - HFP) when a call is
made from the phone. The HFP is enabled again
when the call is made from the watch or when a
new call comes in. Make this setting On to
prevent call switching. When this option is
enabled, the HFP Bluetooth icon is changed from
signal level to BT icon when HFP is kept in
disconnected state.
Bluetooth Icons
The HOT Smart Watch uses a dual mode
Bluetooth device with Bluetooth Classic (2.1) and
Bluetooth Low Energy (BLE, 4.0) in one device.
The Classic Bluetooth is used for call audio, data
connection, and phonebook access and music
control. BLE is used for data connection on the
supported iOS phones (available only with iPhone
4S, iOS 7 and above). The table below lists the
Bluetooth profiles supported by the watch.
