1
OPERATING MANUAL
HÖT-STEAM® SGB Series-Model No. SGB300, SGB600, SGB700, SGB800 & SGB900
-Problem: The Power is ON but the HEATING INDICATOR LIGHT OFF
and the iron does not heat.
=Solution: “ You may have 2 different situations.”
1. There is no Clack of SOLENOID VALVE when you press STEAM BUTTON.
a. Make sure your electric outlet has electric current.
b. Make sure your POWER SWITCH is upward position.
c. Try to plug the iron to another electric outlet.
d. Make sure your electric circuit breaker is on.
e. Increase the TEMPERATURE DIAL to higher number.
(If this is the case, the light in the POWER SWITCH will be turned on.)
2. There is Clack of SOLENOID VALVE when you press STEAM BUTTON.
a. The THERMAL FUSE is blown due to overheating.
b. Replace the FUSE with genuine HÖT-STEAM® replacement parts.
** Unplug the iron when attempting this repair. **
D. MAINTENANCE
• Once nished operating the iron, close the WATER CONTROL VALVE and
press the STEAM BUTTON couple of times until all remaining water inside the
iron gets released.
• Avoid using the iron without resin, as mineral deposits tend to collect and hard-
en inside the iron. Although the use of regular tap water is allowed, it is highly
recommended to use soft or distilled water for best results.
• Follow up the iron Basic Maintenance Schedule regularly noted on last page of
this manual to ensure its longest possible life.
• If you need replacement parts for this iron, contact your local Authorized Deal-
er or HÖT-STEAM® at www.hot-steam.com.
• Use genuine HÖT-STEAM® replacement parts for optimum results.
E. WARRANTY COVERAGE
• Contact your local Authorized Dealer or Distributor from whom the HÖT-
STEAM® SGBnSeries Gravity-Fed Iron was purchased for warranty coverage.
• Warranty can be a form of Replacement or Repair Service of the product.
• You need a Sales Receipt issued by an Authorized Dealer where you iron was
purchased. The Receipt must show Date of Purchase, Model Number and
Serial Number.
• You must obtain a RAN (Return Authorization No.) from HÖT-STEAM® prior to
returning the iron. Contact your Dealer or Distributor for assistance.
• Altered irons with other replacement parts which are not HÖT-STEAM® gen-
uine, may not be covered by this warranty.
• HÖT-STEAM® is not responsible for any freight charges.
“ Technicians will perform thorough examination of the
returned iron to nalize whether the causes are defects
or misuse of the product. ”
