Hoover A 089 Manuel utilisateur

A089

English

INDEX

Introduction

General points on delivery

Guarantee

Safety Measures

Technical Data

Setting up and Installation

Control Description

Detergent drawer

Selection

The Product

Table of Programmes

Customer Awareness/Washing

Cleaning and routine maintenance

Faults Search

CHAPTER

OUR COMPLIMENTS

With the purchase of this Hoover household appliance, you

have shown that you will not accept compromises: you want

only the best.

Hoover is happy to present their new washing machine, the

result of years of research and market experience through

direct contact with Consumers.You have chosen the quality,

durability and high performance that this washing machine

offers.

Hoover is also able to offer a vast range of other household

appliances: washing machines, dishwashers, washer-dryers,

cookers, microwave ovens. Traditional ovens and hobs,

refrigerators and freezers.

Ask your local retailer for the complete catalogue of Hoover

products.

Please read this booklet carefully as it provides important

guide lines for safe installation, use and maintenance and

some useful advise for best results when using your washing

machine.

Keep this booklet in a safe place for further consultation.

When contacting Hoover

or a Customer Services Centre always refer to the Model, No.,

and G number (if applicable of the appliance see panel).

CHAPTER 2

GUARANTEE

The appliance is supplied with a guarantee certificate which

allows free use of the Technical Assistance Service, apart from

a fixed call out charge, for a period of one year from the date

of purchase.

Remember to post part Bof the guarantee certificate within

10 days of the purchase date.

Part Ashould be filled in and kept by you to be shown if

necessary to the technician from the Technical Assistance

Service. The sales receipt should also be kept.

CHAPTER 1

GENERAL POINTS ON DELIVERY

On delivery, check that the following are included with the

machine:

A) INSTRUCTION MANUAL

B) CUSTOMER SERVICE ADDRESSES

C) GUARANTEE CERTIFICATES

D) CAP

E) BEND FOR OUTLET TUBE

F) LIQUID DETERGENT COMPARTMENT

KEEP THEM IN A SAFE PLACE

Check that the machine has not incurred damage during

transport. If this is the case, contact your nearest Hoover

Centre.



SPEDIRE TRATTENERE

EUROPE

Dovunque

tu sia.

● Do not use adaptors or multiple plugs.

● Do not allow the appliance to be used by children or the

incompetent without due supervision.

● Do not pull the mains lead or the appliance itself to

remove the plug from the socket.

● Do not leave the appliance exposed to atmospheric

agents (rain, sun etc.)

● In the case of removal, never lift the appliance by the

knobs or detersive drawer.

● During transportation

do not lean the door against the trolley.

Important!

When the appliance location is on carpet floors, attention

must be paid so as to ensure that there is no obstruction to

the bottom vents.

● Lift the appliance in pairs as illustrated in the diagram.

● In the case of failure

and/or incorrect operation, turn the washing machine off,

close the water inlet tap and do not tamper with the

appliance. Contact a Hoover Technical Assistance Centre

for any repairs and ask for original Hoover spare parts.

Avoidance of these norms may compromise the safety of

the appliance.

● Should the supply cord (mains cable) be demaged, this is

to be replaced by a specific cable available from the after

sales service centre.

CHAPTER 3

SAFETY MEASURES

IMPORTANT:

FOR ALL CLEANING AND MAINTENANCE WORK

●Remove the plug

●Turn off the water inlet tap.

●All Hoover appliances are earthed. Ensure that the main

electricity circuit is earthed. Contact a qualified electrician if

this is not the case.

This appliance complies with Directives 89/336/EEC,

73/23/EEC and following changes.

●Do not touch the appliance with wet or damp hands or

feet.

●Do not use the appliance when bare-footed.

●Extreme care should be taken if extension leads are used in

bathrooms or shower rooms. Avoid this where possible.

WARNING: DURING THE WASHING CYCLE, THE WATER

CAN REACH A TEMPERATURE OF 90°C.

●Before opening the washing machine door, ensure that

there is no water in the drum.

90° C

CHAPTER 5

SETTING UP INSTALLATION

Move the machine near its permanent position without the

packaging base.

Cut tube-holding straps.

Unscrew the central screw (A); unscrew the 4 lateral screws

(B) and remove the cross piece (C).

Lean the machine forward and remove the plastic bags

containing the two polystyrene blocks at the sides, pulling

downwards.

Press the plug (to be found in the envelope with the

instructions) into the hole.

WARNING:

DO NOT LEAVE THE PACKAGING IN THE REACH OF

CHILDREN AS IT IS A POTENTIAL SOURCE OF DANGER.

MPa

CHAPTER 4

kg 5

8˙÷15

2150

1,75

800

min. 0,05

max. 0,8

230

kWh

giri/min.

WATER PRESSURE

SUPPLY

VOLTAGE

MAXIMUM WASH

LOAD DRY

NORMAL WATER LEVEL

POWER INPUT

ENERGY CONSUMPTION

(PROG. 2)

POWER CURRENT FUSE

AMP

SPIN

r.p.m.

52 cm

85 cm

60 cm

Stick the adhesive label supplied in the appropriate language

onto the extractable support from the detergent drawer.

Use front feet to level the machine with the floor.

a) Turn the nut clockwise to release the screw adjuster of the

foot.

b) Rotate foot to raise or lower it until it stands firmly on the

ground.

c) Lock the foot in position by turning the nut anti-clockwise

until it comes up against the bottom of the machine.

Ensure that the Off/On button (C) is not pressed.

Ensure that all the knobs are on the “0” position and that the

door is closed.

Insert the plug.

Press the START (C) button. The power on (G) light will light up.

If this does not light up see faults search.

Fix the sheet of corrugated material on the bottom as shown

in picture.

WATER CONNECTION

Your machine may either be plumbed in or connected to

existing taps, using a tap adaptor with a 3/4 B.S.P.threaded

end connection. The water supply hoses to be found inside

the drum are terminated in two different ways. One end

which has a 90° elbow is to be connected to the appliance

water connection Ewhile the straight end is to be

connected to the domestic supply tap. The hose with the

white collar should be connected to the cold tap, and the

hose with the red collar to the hot tap. The appliance is not

suitable for use with mixer taps.

Hook the end of the outlet hose over the rim of the sink or

outlet pipe, making sure that it is not kinked. For better

positioning of the outlet hose make use of the plastic bend

provided.

Where possible, use a fixed discharge pipe with a diameter

greater than that of the outlet hose this allows the air to

escape.

The minimum height of the top of the outlet hose should be

50 cm.

Extending the outlet hose, especially if the extension is more

than 1 metre, could lead to malfunctioning of the discharge.

The appliance outlet hose should discharge into the foul

water drainage system and not into the surface water

drainage system. Should you require further advice please

contact your local water authority.

50 cm.

HOT

WATER

COLD

WATER

DESCRIPTION OF CONTROL

DOOR OPEN BUTTON

IMPORTANT:

A SPECIAL SAFETY DEVICE PREVENTS THE DOOR FROM

OPENING AT THE END OF THE WASH/SPIN CYCLE. AT

THE END OF THE SPIN PHASE WAIT UP TO 2 MINUTES

BEFORE OPENING THE DOOR.

OFF/ON BUTTON

EXTRA RINSE BUTTON

By pressing the “EXTRA RINSE” button, even the slightest

residue of detersive is removed from fabrics. This is particularly

important for people with delicate skins.

2 min.

CHAPTER 6

CONTROLS

Detergent drawer

Door open button

Off/On button

Super rinse button

Rinse hold button

Off/On indicator light

Spin speed control

Wash control temperature knob

Timer knob for wash programme

A B C D E H I L

SPIN SPEED CONTROL

ROTATES IN BOTH DIRECTIONS

The spin cycle is very important to remove as much water as

possible from the laundry without damaging the fabrics. You

can adjust the spin speed of the machine to suit your needs.

By adjusting the control, it is possible to reduce the maximum

speed, and if you wish, the spin cycle can be cancelled

altogether-position .

NOTE:

THE MACHINE IS FITTED WITH A SPECIAL ELECTRONIC

DEVICE, WHICH PREVENTS THE SPIN CYCLE SHOULD

THE LOAD BE UNBALANCED.

THIS REDUCES THE NOISE AND VIBRATION IN THE

MACHINE AND SO PROLONGS THE LIFE OF YOUR

MACHINE.

RINSE HOLD BUTTON

When this button is selected, the machine stops with the final

rinse water in the drum for mixed fabrics and wool. In this

way, the fabrics are left immersed in the water, preventing

them from creasing, should you be unavailable to remove

them after spinning. When the button is released, the

programme finishes by emptying the water and giving a

delicate spin.If you just want to empty the water (i.e. without

the spin), release the On/Off button, select “Z” and release

the Rinse Hold Button. Press the On/Off button again to drain

the water.

ON/OFF INDICATOR LIGHT

CHAPTER 7

DETERGENT DRAWER

The detergent drawer is divided into 4 compartments:

-The first Ifor the LIGHT WASH CYCLE detergent

-The second II for the main wash detergent

A special container is supplied for use with liquid detergent.

This can be placed inside the draw as shown in fig.

IMPORTANT:

REMEMBER THAT SOME DETERGENT ARE DIFFICULT TO

REMOVE. IN THIS CASE WE ADVISE THE USE OF THE

SPECIAL CONTAINER TO BE USED INSIDE THE DRUM.

-The third bleach compartment

IMPORTANT:

ONLY INTRODUCE LIQUID PRODUCTS IN THE THIRD AND

FOURTH COMPARTMENTS.

-The fourth ✿✿is for special additives, softeners, perfumes,

starches, whiteners, etc.a

WASH TEMPERATURE CONTROL KNOB

ROTATES IN BOTH DIRECTIONS

With this device it is possible to reduce, but no increase

washing cycle temperature.

The table of programmes indicate the maximum temperature

advised for each type of wash.

WARNING: THIS TEMPERATURE MUST NEVER BE

EXCEEDED

TIMER KNOB FOR WASH PROGRAMMES

IMPORTANT:

ALWAYS ROTATE THE KNOB IN A CLOCKWISE

DIRECTION, NEVER IN AN ANTI-CLOCKWISE

DIRECTION. DO NOT PRESS THE “ON” BUTTON (C)

BEFORE SELECTING THE PROGRAMME

The tables describe the washing programme on the basis of

the number or symbol chosen.

CHAPTER 9

THE PRODUCT

IMPORTANT:

When washing heavy rugs, bed spreads and other heavy

articles, it is advisable not to spin.

To be machine-washed, woollen garments and other articles

in wool must bear the “Machine Washable Label”.

IMPORTANT:

When sorting articles ensure that:

-there are no metal objects in the washing (e.g.

brooches, safety pins, pins, coins etc.).

-cushion covers are buttoned, zips and hooks are closed,

loose belts and long tapes on dressing gowns are

knotted.

-runners from curtains are removed.

attention is paid to garment labels.

-when sorting, any tough stains should be removed prior

to washing using stain removers only recommended on

label.

CHAPTER 8

SELECTION

For the various types of fabrics and various degrees of dirt the

washing machine has 3 different programme bands according

to: wash cycle, temperature and lenght of cycle (see table of

washing cycle programmes).

1 Resistants Fabrics

The programmes have been designed for a maximum wash

and the rinses, with spin intervals, ensure perfect rinsing.

The final spin gives more efficient removal of water.

2 Mixed and Synthetic Fabrics

The main wash and the rinse gives best results thanks to the

rotation rhythms of the drum and to the water levels.

A gentle spin will mean that the fabrics become less creased.

3 Special Delicate Fibres

This is a new wash cycle which alternates washing and

soaking and is particularly recommended for very delicate

fabrics such as Pure Machine Washable Wool. The wash cycle

and rinses are carried out with high water levels to ensure

best results.

Table des matières

Autres manuels Hoover Rondelle

Hoover

Hoover H-WASH 700 Manuel utilisateur

Hoover

Hoover Dynamic Next Premium DXP 410AIB3 Manuel utilisateur

Hoover

Hoover AM 1243 S Manuel utilisateur

Hoover

Hoover ACM16 Manuel utilisateur

Hoover

Hoover DXC 27/1-AUS Manuel utilisateur

Hoover

Hoover WDYN9666 G Manuel utilisateur

Hoover

Hoover UMS02 Manuel utilisateur

Hoover

Hoover VT D2 Manuel utilisateur

Hoover

Hoover AS116 Manuel utilisateur

Hoover

Hoover H 120 E Manuel utilisateur

Hoover

Hoover HV-LFL8 Manuel utilisateur

Hoover

Hoover DXA 47/1-AUS Manuel utilisateur

Hoover

Hoover HNL 642 Manuel utilisateur

Hoover

Hoover OPH 716 DF Manuel utilisateur

Hoover

Hoover Washing machine Manuel utilisateur

Hoover

Hoover H-WASH 500 HW 48AMC/1-S Manuel utilisateur

Hoover

Hoover OH100 M7 VARIO Manuel utilisateur

Hoover

Hoover HWB 2DN Manuel utilisateur

Hoover

Hoover HAV-1 Manuel utilisateur

Hoover

Hoover DYN-9166P Manuel utilisateur

Hoover

Hoover HV-LFL6 Manuel utilisateur

Hoover

Hoover SIX.AAA WHISPER 1600 AAA 160 Manuel utilisateur

Hoover

Hoover AI 1040 Instructions d'installation

Hoover

Hoover VT D11 Manuel utilisateur

Manuels Rondelle populaires d'autres marques

Tricity Bendix

Tricity Bendix AW 1000 W Guide produit

Panasonic

Panasonic NA-F60L5WRB Manuel utilisateur

GE WSLP1500 Manuel

Electrolux

Electrolux EWF1284EDW Manuel utilisateur

Bosch

Bosch WAN2829BSN Manuel utilisateur

LG TV2516DV3B Manuel utilisateur

LG TH2517DSAV Manuel utilisateur

VESTEL

VESTEL CMH-XL 7510 TE Manuel utilisateur

AEG

AEG 74335 Manuel d'utilisation

Johnson

Johnson JWF721A Manuel utilisateur

Beko

Beko WTE7604XLW0 Manuel utilisateur

Danby

Danby DTT100A1WDB Instructions de montage

Amica

Amica WA 14 Ex Manuel utilisateur

Daewoo

Daewoo DWD-F1222 Manuel utilisateur

Bosch

Bosch WAS28461AU Manuel utilisateur

Miele

Miele PW 6080 Vario Manuel utilisateur

Finlux

Finlux FLX108CF220 Manuel utilisateur

Whirlpool

Whirlpool 3LBR5132AN0 Manuel utilisateur