HongYu Technology KN300 Manuel utilisateur
1
Wireless Repeater KN300
User Guide
Wireless Repeater KN300 User Guide
I
table of Contents
1 INTRODUCTION........................................................................................................................1
1.1 Brief Introduction................................................................................................................1
1.2 Features...............................................................................................................................1
1.3 Appearance..........................................................................................................................1
1.3.1 LED..........................................................................................................................1
1.3.2 Button.......................................................................................................................2
1.4 Stickers................................................................................................................................3
2 USE YOUR MOBILE PHONE TO CONFIGURE REPEATER ............................................3
2.1 Repeater settings .................................................................................................................3
3 SET UPA REPEATER USING A PC....................................................................................... 11
3.1 First Repeater settings.......................................................................................................11
3.2 Log in to the repeater management page...........................................................................14
3.2.1 Status......................................................................................................................16
3.2.2 Repeater .................................................................................................................16
3.2.3 LAN .......................................................................................................................16
3.2.4 Wireless..................................................................................................................17
3.2.5 Advance..................................................................................................................17
Wireless Repeater KN300 User Guide
1
1 Introduction
1.1 Brief Introduction
KN300 is a wireless repeater specially designed for large houses by HongYu Technology Co.,
Ltd. It works in the 2.4GHz frequency band and provides a wireless rate of up to 300Mbps. It is
your first choice for enhancing wireless signals and enjoying high-speed WiFi.
1.2 Features
⚫Working at 2.4GHz, compatible with 11b/g/n mode, the highest rate can reach 300Mbps;
⚫The page can be configured to repeater to extend the main WiFi signal, and the configuration
is simple;
⚫Indicators visualize the Extend effect.
⚫Provide Power, Ethernet, Repeater and Wi-Fi LED.
1.3 Appearance
1.3.1 LED
Corresponding to Power LED, LAN LED, Repeater LED, Wi-Fi LED lights from top to
bottom.
Wireless Repeater KN300 User Guide
2
1.3.2 Button
WPS button on the front
Rset button on the side
Reset
Button
After pressing and holding the Reset button for more than 5 seconds, when the
Repeater LED blink quickly, the repeater will be restored to the factory settings. At
this time, you can release the button and the repeater will automatically reboot.
WPS
Button
Press the WPS button, and then press the WPS button of the main router, the
repeater will automatically connect to the main router via WPS. After the
connection is successful, the repeater LED will be on.
Wireless Repeater KN300 User Guide
3
1.4 Stickers
2 Use your mobile phone to configure repeater
2.1 Repeater settings
Step 1 Plug the repeater into the power socket and wait for the WiFi LED to blink and the
repeater is started.
Step 2 Use your mobile phone to search for and connect to the wireless network of the
repeater: KN300_XXXXXX.
Wireless Repeater KN300 User Guide
4
Step 3 After a while, the phone will automatically jump to the management page of the
repeater; if not, please open the browser and enter "192.168.19.1" in the address bar to log in
manually.
Wireless Repeater KN300 User Guide
5
Step 4 After entering the management page, we click [START] to configure.
Wireless Repeater KN300 User Guide
6
Step 5 After the repeater automatically searches for the surrounding WiFi, select the wireless
network that needs to be extended. Such as HYLink_MK600_2.4G.
Wireless Repeater KN300 User Guide
7
Tips: If the WiFi Name of the router to be extended is not in the list, please click [Refresh].
Step 6 If the WiFi to be extended is encrypted, please enter its wireless password. You can
check [Set Repeater WiFi] to modify the wireless name of the repeater and set the password of the
repeater. If not checked, the name and password of the repeater will be the same as the main WiFi.
After inputting, click [Next].
⚫Scenario 1: Uncheck [Set Repeater WiFi]
Wireless Repeater KN300 User Guide
8
⚫Scenario 2: Check [Set Repeater WiFi]
Table des matières
