Honeywell 50045947-001/011 Manuel utilisateur

lSafety Guides

lInstallation

lOperation

lMaintenance

Printed in U.S.A.

69-2379EF-02

7312212 (Rev. C 12/3/09)

50045947-001 /011

50045947-002 /012

REVERSE OSMOSIS FILTRATION SYSTEM

69-2379EF-01

TABLE OF CONTENTS

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Reverse Osmosis Filtration System . . . . . . . . . . 3

Parts Included. . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Other Requirements. . . . . . . . . . . . . . . . . . . . . . 3

Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . 3

RO System Assembly Installation. . . . . . . . . . . . 4

Plumbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

RO System with Storage Tank. . . . . . . . . . . . . 5

RO System with Pump & Storage Tank. . . . . . 6

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 9

Maintenance Parts. . . . . . . . . . . . . . . . . . . . . . 10

Specifications listed are based on average filter life of one year (one operating

season for the steam humidifier).

Water Hardness 0-25 grains per gallon (gpg)

Water Pressure 30-120 pounds per square inch (psi)

Water Temperature 40°F - 100°F

(only use on cold water supply)

Weight (RO System with water,

excluding storage tank) 7 lbs.

DIMENSIONS

3-1/2”

16”

11-3/8”

11”

17”

SPECIFICATIONS

FIG. 1

REVERSE OSMOSIS FILTRATION SYSTEM

This Reverse Osmosis (RO) filtration system

removes dissolved solids and organic matter from

water by passing it through a membrane which

separates and flushes minerals and impurities

from the water.

Install this system upstream of the steam humidi-

fier’s water inlet. It is recommended that the RO

system’s filters be replaced at least once per year

to ensure optimal humidifier performance.

SAFETY GUIDELINES

lRead, understand and follow all steps, guides

and requirements before installing the Reverse

Osmosis (RO) filtration system.

lAll water connections must comply with local

and state plumbing and sanitation codes.

Reference, understand and comply with all gov-

erning codes before installing the RO filtration

system.

lDo not install on hot water supply. Only use

cold water supply.

lDo not install outside or in unconditioned space

where there is potential for the water system to

freeze.

OTHER REQUIREMENTS

lIf the RO filtration system or the humidifier are installed in finished space or above ceilings, it is required

to install a water drip pan with a shutoff sensor under all water connections.

See steam humidifier manual, Appendix C.

TOOLS NEEDED

lCrescent wrench

lPhilips screwdriver

PARTS INCLUDED

ALL MODELS

lRO System Assembly

–RO manifold assembly

–Supply tubing (one 20 ft. long 1/4” dia.

white tube)

–Adapter elbow (3/8” x 1/4”)

–Drain line assembly (including one 6.5 ft.

long 1/4” dia. red tube, one 1 ft. long 1/4”

dia. red tube, and drain flow restrictor

assembled in drain line fitting)

–Mounting screws and washers

lWater Filters

–#1 - Sediment filter

–#2 - Reverse osmosis filter

–#3 - Staging tank

ALL MODELS

lWater Storage Tank

–Storage tank

–Storage tank tubing (one 6 ft. long 3/8” dia.

yellow tube)

–Shutoff valve

–Teflon tape

SELECT MODELS (as listed)

lPermeate Pump (Model 50045947-002 /012)

–Permeate pump

–Mounting bracket and screws

–Tee fitting

FIG. 2

RO SYSTEM ASSEMBLY INSTALLATION

1. Choose a location for the RO system

assembly capable of holding up to 7 lbs.

2. Mark screw/washer location 9 inches apart.

3. Fasten screws and hanger washers.

–Sheet metal install – use sheet metal

screws (not provided).

–Wood stud install – use provided wood

screws and hanger washers.

4. Hang the RO system assembly on the

hanger washers.

5. Connect Filter Assembly top cover.

6. Connect three filter cartridges in the order

below by turning cartridge to the right,

ensuring thread is properly engaged and

seal is tight.

lAlign #3 staging tank with RO system

assembly connection #3.

lAlign #2 RO filter with RO system

assembly connection #2.

lAlign #1 sediment filter with RO system

assembly connection #1.

7. Move water storage tank into place on the

floor surface. Use the included tank stand

and position the tank upright or on its side.

8. Apply PTFE thread seal (Teflon) tape on

the storage tank thread and install the shut-

off valve.

9”

NOTE: Be sure to allow a minimum space

of 1-1/2" under the system for removing

and replacing the filters.

Shutoff

Valve

Storage

Tank

Hanger

Washer

(2)

Screw

(2)

Top Cover

Staging Tank

RO Filter

Sediment Filter

(level)

PLUMBING

lCut 1/4” dia. tubing lines to fit your installation.

Ensure all cuts are evenly made with no nicks,

scratches or rough spots on the tube end.

lLonger tubing lengths – nylon or copper – may

also be used (not provided). Ends of tubing

must be round and free of burrs and scratches

to seal properly.

lInstall 3/8” x 1/4” adapter elbow into blue outlet

port.

lInstall 3/8” dia. yellow tube between yellow inlet

port and storage tank valve.

lLocate drain line assembly (1/4” dia. red tubes

assembled to flow control coupling). Install 1 ft.

long end of 1/4” dia. red drain line into red port

in the RO system. Route the longer 1/4” dia.

red drain line to a drain. Note that the coupling

contains a flow control that is critical to the

function of the RO system. Make sure the

drain line assembly is installed correctly.

lPush tubing completely into applicable fitting by

pushing past initial resistance and then applying

light pulling force to ensure a tight fit.

–To remove tube from connection, depress

collar and pull tubing.

FIG. 4

lWater tube connections to the water supply, fil-

ter and steam humidifier must be checked for

leaks after installation and a short period of

operation.

Tube Fully Engaged with Fitting

Collar O-Ring

Tubing

Collar (depress to

remove tubing)

Tubing

FIG. 5

Storage Tank

Open

Closed

1/4” White

Tubing

3/8” x 1/4”

Adapter Elbow

Cold Water

Supply

1/4” White

Tubing

3/8”

Yellow Tubing

Drain Flow

Control

Drain Points for Reject Water

lFollow local codes for proper installation

lRefer to additional drain requirements in steam

humidifier manual when coupling RO drain and

humidifier drain

Standpipe

Sump

Laundry

Tub

Floor

Drain

air gap

air

gap

air

gap air

gap

RO System with

Storage Tank

(Model 50045947-001 /011)

#1 #2 #3

To Steam

Humidifier

Shutoff

Control Valve

1/4”

Red Tubing

Floor

Drain

Condensate

Pump

air

gap

FIG. 3

PLUMBING (continued)

FIG. 7

Connect

1/4” White

Tubing

Route tube

through hole

lInstall water pump (labeled permeate pump)

with mounting bracket and screws. Make sure

pump is level and is oriented with arrow point-

ing up.

lRemove top cover of RO system and connect a

1/4” tube to the auto shutoff assembly. Route

the tube through the hole provided and to the

permeate inlet on the pump. Snap top cover

back on RO system.

1/4” White

Tubing 3/8”

Yellow Tubing

1/4”

Red Tubing

Drain Flow

Control

Standpipe

Sump

Laundry

Tub

Floor

Drain

air gap

air

gap

air

gap air

gap

#1 #2 #3

1/4”

Red Tubing

1/4” White

Tubing

brine

out permeate

out

brine

in permeate

Water

Pump

(must be installed with

arrow pointing up)

1/4” White

Tubing

Connect

1/4” White

Tubing

RO System with

Water Pump &

Storage Tank

(Model 50045947-002 /012)

Drain Points for Reject Water

lFollow local codes for proper installation

lRefer to additional drain requirements in steam

humidifier manual when coupling RO drain and

humidifier drain

1/4” White

Tubing

3/8” x 1/4”

Adapter Elbow

Storage Tank

Open

Closed

Floor

Drain

Condensate

Pump

air

gap

Cold Water

Supply

To Steam

Humidifier

Shutoff

Control Valve

FIG. 6

OPERATION

RO System Assembly

The RO System Assembly directs the flow of

water into the filters in numeric order, and out to

the steam humidifier. Abuilt-in backflow preven-

tion valve prevents the backward flow of water

from the storage tank. The shutoff/check valve

provided with the steam humidifier must still be

installed between the RO system and the steam

humidifier.

#1 Sediment Filter

Cold water enters the sediment filter, reducing

chlorine, sand, silt, dirt and other sediment. This

filters the feed water before entering the RO filter.

#2 Reverse Osmosis (RO) Cartridge

Filtered water enters the RO filter where dis-

solved minerals are removed, effectively ‘soften-

ing’ the hardness of the water. This reduces the

amount of solid mineral (scale/sediment) fallout

inside the steam humidifier’s tank. Reducing the

amount of scale and sediment increases the time

between manual cleanings of the steam humidifi-

er.

#3 Staging Tank Canister

After leaving the storage tank, but before going to

the steam humidifier, water enters the #3 staging

tank canister. This canister holds the initial water

that enters steam humidifier when the solenoid fill

valve opens.

Storage Tank

The storage tank holds filtered water. A

diaphragm inside the tank keeps water pressur-

ized when the tank is full, to provide fast flow

from the RO outlet. The tank is charged with 5-7

psi air. The automatic shutoff valve fills and pres-

surizes the tank when low, and stops the flow of

water when the tank is full.

NOTE: It is normal to hear the RO System oper-

ating the first few days after the initial

installation. This will dissipate as air is

purged from the system.

MAINTENANCE

Replacement Steps - Water Filters

lIt is recommended that the #1 sediment filter

and #2 RO filter be replaced at least once per

season or as needed.

lWhen installing new filters, install #2 RO filter

first, followed by the #1 sediment filter.

Flow Control

1. Disconnect the red tube at the connector that is

in the drain line approx. 12” from RO assembly,

leaving the connector attached to the RO sys-

tem.

2. Remove and replace the cylindrical plastic flow

control that is inserted in the end of the red

tube removed from the connector. If the plastic

flow control does not appear to be in the end of

the red tubing, it may have stayed in the con-

nector when the tube was removed. Remove

the old flow control from the connector before

installing the new one in the end of the tubing.

Replace

FIG. 8

Turn cartridges in the direction of

the arrow to remove. Turn them

in the opposite direction to install.

Staging Tank

RO Filter

Sediment Filter

Replace

Remove,

empty and

reconnect

NOTE: Refer to the steam humidifer’s manual for

more detailed maintenance steps.

TROUBLESHOOTING

Number of

“Service” red

light blinks

Description Possible Cause Corrective Action

2 Water level sensors

failed to detect tank

water

Scaling on the sensor Replace #1 sediment filter and

#2 RO filter. See steam

humidifier manual trouble-

shooting section for specific

humidifier steps

3Failed to fill steam

humidifier tank

Expired #1 and #2 water fil-

ters

Missing flow control in drain

line

Replace flow control (provided

with 50046086-001 /011)

Storage tank air charge is

less than 5-7 psi

Drain the storage tank. Check

tank air pressure and, if low,

pressurize to 6 psi

4Heating element

overheated

Scaling on element See steam humidifier manual

for cleaning steps

6 Water overflow

sensed in tank

Heavy sediment in tank

13 Tank failed to drain

Blinking “Cleaning

required” light on

steam humidifier

“Water hammer” or

leaks at initial instal-

lation (Model

50045947-002 /012

only)

Dry filters may have higher

potential for this as water

works through the dry filter

initially

Fill the filters with water before

connecting the RO outlet to

the humidifier, letting the water

run into the drain or a bucket.

Once air is out of the RO out-

let line, turn off the water and

connect RO outlet to humidifi-

er. Turn water back on

The following table refers to the steam humidifier’s fault detection feature.

MAINTENANCE PARTS

Key

No. Part Number Description

150046083-001 One #1 sediment filter

250046084-001 One #2 reverse osmosis (RO) filter

350046089-001 One #3 staging tank

450046086-001 Filter kit, including one #1 sediment filter,

one #2 RO filter, and one flow control

21 FIG. 9

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Honeywell Système de filtration d'eau

Honeywell

Honeywell miniplus FK06 Manuel utilisateur

Honeywell

Honeywell HF49 Manuel utilisateur

Honeywell

Honeywell HU-20 Manuel utilisateur

Honeywell

Honeywell FF40 Manuel utilisateur

Honeywell

Honeywell FK09S Manuel utilisateur

Honeywell

Honeywell 50045947 Manuel utilisateur

Honeywell

Honeywell HU-30 Manuel utilisateur

Honeywell

Honeywell Braukmann F76S Manuel utilisateur

Honeywell

Honeywell kaltecpro PW 12-A Manuel utilisateur

Honeywell

Honeywell MHF49 Manuel utilisateur

Honeywell

Honeywell FF40 Manuel utilisateur

Honeywell

Honeywell HRO-50 Manuel utilisateur

Honeywell

Honeywell F78TS Manuel utilisateur

Honeywell

Honeywell NK300SE-VE Manuel utilisateur

Honeywell

Honeywell MiniPlus FF06 Manuel utilisateur

Honeywell

Honeywell F74CS Manuel utilisateur

Honeywell

Honeywell F74CS Manuel utilisateur

Honeywell

Honeywell FF60 Manuel utilisateur

Honeywell

Honeywell kaltecSoft PW52-AS Manuel utilisateur

Honeywell

Honeywell F74C Series Manuel utilisateur

Honeywell

Honeywell miniplus FK06 Manuel utilisateur

Honeywell

Honeywell WTE-G-D-3.6-PT01 Manuel utilisateur

Honeywell

Honeywell BRAUKMANN F74C Manuel utilisateur

Honeywell

Honeywell DialSet FK06 Manuel utilisateur

Manuels Système de filtration d'eau populaires d'autres marques

Wisy

Wisy LineAir 100 Manuel utilisateur

Schaffner

Schaffner Ecosine FN3446 Series Manuel d'utilisation

Pentair

Pentair FLECK 4600 SXT Guide de l'utilisateur

H2O International

H2O International H20-500 Manuel utilisateur

Renkforce

Renkforce 2306241 Manuel utilisateur

Neo-Pure

Neo-Pure TL3-A502 Manuel utilisateur

FLTR

FLTR OBF Manuel utilisateur

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manuel utilisateur

Applied Membranes

Applied Membranes W-G844EM Manuel utilisateur

BEGA

BEGA 116 Manuel utilisateur

WATA

WATA Standard Manuel utilisateur

Price

Price FFU series Manuel

Gaggenau

Gaggenau BRITA INTENZA 467873 Manuel utilisateur

Brita

Brita SAFF-100 Manuel utilisateur

HEISSNER

HEISSNER FPU24000-00 Manuel utilisateur

BGS technic

BGS technic 1518 Manuel utilisateur

Reverse Osmosis

Reverse Osmosis RF Series Manuel utilisateur

ubbink

ubbink Filtramax Series Manuel utilisateur