Honeywell RT10A Manuel utilisateur
RT10A
Rugged Tablet powered by Android™
Quick Start Guide
RT10A-EN-QS-01 Rev A
8/20
1
Out of the Box
Make sure that your shipping box contains these items:
• RT10A rugged tablet
(Model RT10AL0N or RT10AL1N)
• Power supply (power cord sold separately)
•Stylus
• USB cable
• Product documentation
If you ordered accessories for your tablet, verify that they are
also included with the order. Be sure to keep the original
packaging in case you need to return the tablet for service.
Note: RT10AL0N models do not include a WWAN radio.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC)
industrial-grade microSD™ or microSDXC™ memory cards with
RT10 tablets for maximum performance and durability. Contact
a Honeywell sales representative for additional information on
qualified memory card options.
2
Tablet Features
Microphone
Touch
Screen
Home Button
Fn1 Button Power Button
Front Camera
Kensington Lock Port
Barcode Scanner
(model dependent)
I/O
Cover
Light Sensor and
LED Indicators:
-Wi-Fi
-Link
-Battery
-Power
I/O Panel
(I/O cover open)
Power Jack
Audio Jack
USB-A Port
MicroSD Card Slot
USB-C Port
3
Warning: To avoid possible hearing damage, do not
listen at high volume levels for long periods.
Camera Flash
Micro SIM Card
Cover/Slot
Speaker
Battery
Speaker
Docking
Connector
Battery
Lock
Battery
Release
Stylus
Rear Camera
Fn2
Button
Volume
Button
Extension Port
(cover not shown)
Laser Safety Label Location
(model dependent)
4
Install a Micro SIM Card
Only RT10AL1N (WWAN) models support micro SIM card use
for cellular phone features.
6
12
34
5
5
Note: Always power off the tablet before attempting to install or
remove a card.
Install a microSD Card (Optional)
Note: Format the microSD card before initial use.
Note: Always power off the tablet before attempting to install or
remove a card.
7
12
6
Install the Battery
The tablet ships with a Li-poly 7.7 VDC, 45.43 watt-hour battery
manufactured for Honeywell International Inc.
Charge the Tablet
The RT10 rugged tablet ships with a partially charged battery.
Charge the battery for a minimum of 1.5 hours. Using the tablet
while charging the battery increases the time required to reach
a full charge.
2
4
3
1
7
Turn the Power On or Off
To turn the tablet on:
•PressandholdthePower button for approximately 3 seconds
until the blue LED power indicator lights up.
To turn the tablet off:
1. Press and hold the Power button until the options menu
appears.
2. Touch Power off.
We recommend use of Honeywell Li-poly or Li-ion
battery packs. Use of any non-Honeywell battery may
result in damage not covered by the warranty.
Ensure all components are dry prior to placing the
battery in the computer. Mating wet components may
cause damage not covered by the warranty.
We recommend the use of Honeywell accessories and
power adapters. Use of any non-Honeywell
accessories or power adapters may cause damage not
covered by the warranty.
12
8
Battery Replacement
Hot Swap
You can replace the battery on demand provided the following
conditions are met:
• The tablet has been powered on for at least 4 minutes.
AND
• You insert a new battery within 30 seconds.
Swap Battery Mode
Swap Battery mode places the tablet in a low power state so that
the battery can be removed for a short time.
To activate Swap Battery mode:
1. Press and hold the Power button until the options menu
appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.
Sleep Mode
Sleep mode automatically turns the touch panel display off and
locks the tablet to save battery power when the tablet is inactive
for a programmed period of time.
1. Press and release the Power button to wake the tablet.
2. Drag the toward the top of the display to unlock the
tablet.
9
Adjust the Display Sleep Time
To adjust the amount of time before the display sleeps after
inactivity:
1. Swipe up from the bottom of the Home screen to access all
apps.
2. Touch Settings > Display > Advanced > Sleep.
3. Select the amount of time before the display goes to sleep.
4. Touch to return to the Home screen.
About the Home Screen
Notification /
Status Bar
Search Bar
Home Screen
Panel
Favorites Tray
Navigation
Buttons
Autres manuels pour RT10A
1
Table des matières
Autres manuels Honeywell Comprimé
Honeywell
Honeywell ScanPal EDA71 Manuel utilisateur
Honeywell
Honeywell ScanPal EDA10A Manuel utilisateur
Honeywell
Honeywell ScanPal EDA71 Manuel utilisateur
Honeywell
Honeywell ScanPal EDA71 Manuel utilisateur
Honeywell
Honeywell Wireless T2 Manuel utilisateur
Honeywell
Honeywell ScanPal EDA70 Manuel utilisateur
Honeywell
Honeywell RT10W Manuel utilisateur
Honeywell
Honeywell EDA70-3 Manuel utilisateur
Honeywell
Honeywell RT10A Manuel utilisateur
Honeywell
Honeywell Genesis Touch Manuel utilisateur
