Honeywell FBII OMNI 600 Manuel utilisateur

FBII Security System

FBII Security SystemFBII Security System

FBII Security System

I®

®4

I®

®6

I®

®6

I®

®8

User Guide

N9939V5 4/04 Rev. A

- 2 -

Table Of Contents

QUICK REFERENCE .................................................................................................................... 3

INTRODUCTION ........................................................................................................................... 6

SYSTEM REFERENCE ................................................................................................................7

ARMING THE SYSTEM.............................................................................................................. 10

DISARMING THE SYSTEM ....................................................................................................... 14

USER CODES ............................................................................................................................. 15

MISCELLANEOUS COMMANDS.............................................................................................. 16

USING A PAGER ........................................................................................................................ 22

TESTING THE SYSTEM ............................................................................................................. 24

RECOMMENDATIONS ON SMOKE DETECTORS.................................................................. 25

EMERGENCY EVACUATION .................................................................................................... 26

GLOSSARY ................................................................................................................................. 27

RADIO FREQUENCY EMISSIONS STATEMENTS.................................................................. 29

TELEPHONE/MODEM INTERFACE STATEMENTS ............................................................... 29

TELEPHONE OPERATIONAL PROBLEMS ............................................................................. 30

0560 DECLARATION OF CONFORMITY ............................................................................ 30

LIMITATIONS OF THIS ALARM SYSTEM................................................................................ 31

ONE YEAR LIMITED WARRANTY ............................................................................................ 32

- 3 -

Quick Reference

TO ARM THE SYSTEM

1. Check to make sure the system is ready. (The Green READY light is lit.)

2. Enter your 4-digit (or 6-digit) user code.

The ARMED/light will light.

3. Exit through a door designated by your installer as an exit/entry door.

NOTE: If you DO NOT EXIT during the exit time and your system installer has

programmed your system for Auto-Stay, the system will arm in the Auto-Stay

mode.

TO DISARM THE SYSTEM

1. Enter through a door designated by your installer as an exit/entry door.

2. Enter your 4-digit (or 6-digit) user code.

The ARMED/ light will go out.

TO ARM THE SYSTEM AND STAY INSIDE

1. Check to make sure the system is ready. (The Green READY light is lit.)

2. Press

STAY

/ .

3. Enter your 4-digit (or 6-digit) user code.

The ARMED/ light and STAY/ light will both light.

REMEMBER: Unless the Quick Exit feature is enabled, you must disarm the

system if you want to open the door or leave the premises after the exit time has

passed.

TO ARM THE SYSTEM IN INSTANT MODE, AND STAY INSIDE

1. Check to make sure the system is ready. (The Green READY light is lit.)

2. Press

INSTANT

/ .

3. Press

STAY

/ .

4. Enter your 4-digit (or 6-digit) user code.

The ARMED/ light, the INSTANT/ light, and the STAY/ light will all be

lit.

TO RESET SMOKE DETECTOR

1. Enter your 4-digit (or 6-digit) user code twice.

- 4 -

Quick Reference (cont)

The following table lists the “Quick Commands” available with this control.

Key Description Keypads Comments

#1Quick Arm – if system is ready All keypads Allows you to arm the system without requiring your

user code. User code is always needed to disarm

the system.

#2Force Arm – bypasses faulted

zones

All keypads Allows you to arm the system even if some zones

are faulted. These zones will be automatically

bypassed and will be unprotected.

BYPASS

nn (zone no.)

Quick Bypass All keypads If not enabled, requires user code with authority 1,

2, or 3.

#3Set Time and Date All keypads May require user code.

#4Zone Directory LCD* only Lists each zone with its descriptors. Mode

terminates after last enabled zone.

#50 Quick Help (OMNI624/848 only) LCD* only Provides a listing of all quick commands available in

the system.

#51 Show Time and Date LCD* only May also require code.

#52 Show Auto Arm Time LCD* only May also require code.

#53 User Event Log View LCD* only Also needs user code with authority level 1 or 2.

#54 Set Auto Arm Time of Current

Partition (OMNI624/848) or

System (OMNI400/600)

All keypads By partition (OMNI624/848) or system

(OMNI400/600), may also require code.

#55 Display Firmware Version LCD* only Displays panel’s revision.

#56 Display Key Fob Low Batteries

(OMNI624/848 only)

All keypads Wireless Key Fob battery test.

#57 Door Strike All keypads Activate doorstrike or trigger. May require certain

user code.

#58 Change/View Pager Number All keypads For keypad partition (OMNI624/848) or system

(OMNI400/600), only LCD* shows phone number.

#6Display/Toggle Chime Mode All keypads LCD* displays current state first, then offers to

toggle. All others just toggle the state.

#7Assign User to Other Partition

or to Activate Paging

(OMNI624/848 only)

All keypads Need user auth. of 1 or 2. Digit 4 (P) enables user

to page.

Paging must be enabled and turned on.

#8User Page Toggle All keypads Toggles if users should send page for

Open/Close by partition (OMNI624/848) or by

system (OMNI400/600).

#9User On-line All keypads Connects to downloader while on line, disconnects

home phone.

#0Multi-Partition (OMNI624/848

only)

All keypads LCD* displays current enables, 1, 2, 3 – P = 4

NOTE: An entry of 3 is available for the OMNI848

only

* 2-line alpha display

- 5 -

Quick Reference (Cont’d)

The following table provides a summary listing of LED indications when using a LED keypad.

INDICATOR ON

SLOW PULSE

(approx. 600mS ON

–600mS OFF)

FAST BLINK

(approx. 150mS ON

–150mS OFF)

SLOW BLINK

(approx. 100mS ON

–900mS OFF)

ARM / Armed Comm. Fail Alarm –

AC/LB / AC good Syst Batt Trbl ––

READY /

✔

Ready Program Mode Alarm memory –

1 Zone Fault Zone Trouble Zone Alarm Zone Bypass

2 Zone Fault Zone Trouble Zone Alarm Zone Bypass

3 Zone Fault Zone Trouble Zone Alarm Zone Bypass

4 Zone Fault Zone Trouble Zone Alarm Zone Bypass

5 Zone Fault Zone Trouble Zone Alarm Zone Bypass

6 Zone Fault Zone Trouble Zone Alarm Zone Bypass

7 Zone Fault Zone Trouble Zone Alarm Zone Bypass

8 Zone Fault Zone Trouble Zone Alarm Zone Bypass

STAY / Stay Armed –––

INST / Instant Armed Arm disabled ––

TRBL / –––Phone Fail

SUPER / –Bell Supr Zone Tamper –

Other LED display combinations:

•Slow Pulse of ARM/ , AC/LB/ , and READY/

✔

LEDs indicate the system is in Walk

Test Mode.

•Fast Blink of Zone and SUPER / LEDs indicate a tamper condition for the blinking

zone.

- 6 -

Introduction

Congratulations on your decision to protect your home or business with the OMNI®

security system. You have chosen a reliable, state-of-the-art security system that is

remarkably easy to operate. Your system has been professionally installed by your

local Security Company whose representative can explain the specifics of your

system.

The keypad is the input and display device for your security system. Your Security

Company representative will suggest the model most appropriate for your premises

and your needs. There are three types of keypads that can be used with this system:

LCD keypad (alpha display), Fixed-Word keypad (2-digit display), or LED keypad.

Since your system may use any of these keypads, the displays of all keypads are

described in this manual.

The OMNI400, OMNI600, OMNI624, and OMNI848 are listed by Underwriters

Laboratories for Household Fire and Burglary applications.

Throughout this manual, the following conventions are used to represent the

keystrokes required to perform the following functions.

STAY

/ Press Button labeled STAY or .

BYPASS

/ Press Button labeled BYPASS or .

INSTANT

/ Press Button labeled INSTANT or .

CODE

/ Press Button labeled CODE or .

Enter 4-digit (or 6-digit) user code.

Please keep your manual in a convenient location so you can refer to it if

needed.

- 7 -

System Reference

ZONE DESCRIPTIONS

In the following table, enter a description of the area of protection for each zone.

Example: Zone 1 Windows on North side of building.

Zone 4 Main entrance to building.

Zone Description Zone Description

1 25*

2 26*

3 27*

4 28*

5 29*

6 30*

7 31*

8 32*

9* 33*

10* 34*

11* 35*

12* 36*

13* 37*

14* 38*

15* 39*

16* 40*

17* 41*

18* 42*

19* 43*

20* 44*

21* 45*

22* 46*

23* 47*

24* 48*

* Zones 9 through 48 are not used with the OMNI400.

Zones 13 through 48 are not used with the OMNI600.

Zones 25 through 48 are not used with the OMNI624.

Entry time ________ Door __________ Exit time ________

Entry time ________ Door __________

Exit time is the same for all designated entry/exit doors.

- 8 -

System Reference (cont)

SEND-HELP ALERT

All keypads are equipped with emergency-pair keys. In order to activate

the alert, both keys must be pressed at the same time. The type of keypad

you have installed dictates which keys you press. Your installer will show you how

to activate these emergency keys. The emergency keys used for all keypads are

shown below.

The following SEND - HELP ALERT is programmed into my system:

KEYS DESCRIPTION

NOTE: These key combinations may also be programmed for other system

functions.

PAGER ALERT

If programmed, a button on a designated keyfob may also be used to send an alert

message to a pager. Ask your installer if this was done.

MONITORING STATION INFORMATION

Account #

Telephone #

- 9 -

System Reference (cont)

USER CODE ASSIGNMENTS

In the following table, enter the names of the individuals assigned to each user

number.

User Assigned To… User Assigned To…

1 33*

2 34*

3 35*

4 36*

5 37*

6 38*

7 39*

8 40*

9 41*

10 42*

11 43*

12 44*

13 45*

14 46*

15 47*

16* 48*

17* 49*

18* 50*

19* 51*

20* 52*

21* 53*

22* 54*

23* 55*

24* 56*

25* 57*

26* 58*

27* 59*

28* 60*

29* 61*

30* 62*

31* 63*

32* 64*

* User Codes 16 through 64 are not used with the OMNI400 or OMNI600.

User Codes 33 through 64 are not used with the OMNI624.

____ ____ USER CODE NOTE: User codes can be either 4 digits or 6 digits, depending on installer

4-digit 6-digit programming. Ask your installer what type of user codes (4 or 6 digits) are being used in

your system. When performing system functions, you must use the appropriate 4- or 6-

digit user codes.

- 10 -

Arming the System

IS THE SYSTEM READY?

You can arm and disarm the burglar portion of your security system. Before you

can arm the system, it must be “ready.” If you have a protected door open, or

someone is moving in view of a motion detector, the system will not display the

“READY” message.

The system is ready if the READY/

✔

light is lit and the display shows:

LCD Keypad:

SYSTEM READY

Fixed-Word Keypad:

READY/

✔

LED lit

LED Keypad:

READY/

✔

LED lit

NOTE: If programmed by your installer, you may arm the system if a delay or

interior zone is faulted. However, faulted zones must be restored before your exit

time expires or an alarm or zone bypass will result. Ask your installer if your

system has this feature and, if so, if it causes an alarm or zone bypass.

TO ARM THE SYSTEM AND LEAVE

Enter your user code.

The System ARMED/ light will go on and the display will show:

LCD Keypad:

ON: AWAY 120s

Fixed-Word Keypad:

ARM/ LED lit

120

LED Keypad:

ARM/ LED lit

NOTE: The number 120 shown above for the LCD and Fixed-Word keypads

indicates a counter that is updated every second and displays the amount of time

remaining to exit without sounding an alarm.

Exit through a door designated by your installer as an exit/entry door. You must

leave within the exit time programmed by your installer. Refer to the reference

sheet for the time that has been set for your system.

This system can be programmed by the installer for the AUTOSTAY feature, which

automatically bypasses interior zones programmed for AUTOSTAY if you arm the

system and do not exit through a delay zone during exit time.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Système de sécurité

Honeywell

Honeywell SUGPACK-UK Manuel utilisateur

Honeywell

Honeywell 032211.17 Manuel utilisateur

Honeywell

Honeywell NetAXS NX4S1 Manuel utilisateur

Honeywell

Honeywell Notifier P700N Manuel utilisateur

Honeywell

Honeywell LYNX TOUCH L5200 Manuel utilisateur

Honeywell

Honeywell LYNX Touch L5210 Series Instructions de montage

Honeywell

Honeywell VISTA-21iP Manuel utilisateur

Honeywell

Honeywell ADEMCO VISTA-10P Manuel du propriétaire

Honeywell

Honeywell SF340F Manuel utilisateur

Honeywell

Honeywell MA-2000 Manuel utilisateur

Honeywell

Honeywell VISTA-128FBP Manuel utilisateur

Honeywell

Honeywell Domonial Manuel utilisateur

Honeywell

Honeywell OMNI-408 Manuel utilisateur

Honeywell

Honeywell Domonial Manuel utilisateur

Honeywell

Honeywell Galaxy 8 Manuel utilisateur

Honeywell

Honeywell Ademco VISTA-32FB Mode d'emploi

Honeywell

Honeywell Notifier NFS2-640/E Manuel utilisateur

Honeywell

Honeywell LYNX Touch L5210 Series Mode d'emploi

Honeywell

Honeywell LYNX Touch L7000 Series Manuel utilisateur

Honeywell

Honeywell Lynx Plus Series Manuel utilisateur

Honeywell

Honeywell ESSER TAM Manuel utilisateur

Honeywell

Honeywell INTELLIGUARD 9000 Manuel

Honeywell

Honeywell VISTA-128FBPN Instructions de montage

Honeywell

Honeywell Lyric Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur