Honeywell 5601 Manuel utilisateur

Read this manual carefully and never store inside the safe!

User Guide

Steel Security Safe

Package Includes

Please carefully check the above list to confirm all items have been received. If any items

are missing, please contact Consumer Assistance. (see page 6 for contact information).

1 - Steel Security Safe

1 - Operation Manual

2 - Override Access Keys

1 Steel Security Safe 1 Operation

Manual

2 - Override

Access Keys

ENGLISH

Models 5601, 5610,

815601, 815610

1234

WELCOME / PACKAGE CONTENTS ...............................................PAGE 1

OVERRIDE ACCESS KEY / INSTALL BATTERIES........................PAGE 2

TESTING DIGITAL LOCK / PROGRAMMING NEW USER CODE...PAGE 3

TESTING NEW USER CODE / SECURE LOCKOUT.....................PAGE 4

PERIOD / LOST OR FORGOTTEN USER CODES........................PAGE 4

CARE AND MAINTENANCE................................................................PAGE 4

ANCHORING YOUR SAFE....................................................................PAGE 5

CONSUMER ASSISTANCE...................................................................PAGE 6

ORDERING ADDITIONAL OVERRIDE ACCESS KEYS................PAGE 7

SAFE IDENTIFICATION RECORD / DIGITAL USER CODE.......PAGE 7

RECORD.....................................................................................................PAGE 7

NOTES........................................................................................................PAGE 8

WARRANTY INFORMATION................................................................PAGE 9

For Your Protection

• Do not remove the Serial Number tag from the safe.

• Never Store Override Access Keys inside safe.

• Record all Safe Identiﬁcation Numbers on Safe Identiﬁcation Record (page 7).

• Save this manual and NEVER keep it inside the safe.

INDEX

The following list outlines the items and quantities of each included with your new

safe. Please carefully check the list to conﬁrm all items have been received. If

any item is missing, please contact Consumer Assistance (See page 6 for contact

information).

Operation Manual (1 ea.)

Override Access Keys (2 ea.)

Mounting Hardware (1 set)

Your Honeywell Steel Security Safe will provide years of safe and secure protection

for your valuables, important documents and other personal items. All Honeywell

safes are designed and built using the highest manufacturing standards to ensure

maximum user satisfaction under a variety of conditions. With proper care, your

Honeywell safe will provide “Peace of Mind” for many years to come.

Thank you and enjoy!

Attention: DO NOT RETURN SAFE TO STORE

If you are missing parts or have difﬁculty operating your safe, please contact our

Consumer Assistance Department by telephone. Store will not accept returned

products without prior authorization. You must ﬁrst contact our consumer

assistance department. (See page 6 for contact information)

WELCOME

PACKAGE CONTENTS

The batteries must be installed before using your safe. The battery compartment is located inside

the safe on the lock cover panel.

Note:

If both green and red LED’s are on, it is an indicator that the batteries are weak and must be

changed immediately. The User Code will not be erased if power is restored by replacing the

batteries within 30 minutes. After 30 minutes, the User Code will be erased and will need to be

reprogrammed. Weak or dead batteries should be replaced immediately and all 4 batteries should

be changed. To replace the batteries please follow STEPS 1 - 3. Remember to always remove

batteries from safe if not using for an extended period of time. If your batteries are completely dead

and you cannot open the safe by using the digital keypad, use the override access key to open safe

and access the battery compartment. The use of Non-alkaline or rechargeable batteries is NOT

RECOMMENDED.

1. Remove battery compartment cover and insert 4 “AA” batteries. Make sure that the

batteries are installed in the correct direction with regard to polarity (+ and -).

(Figure 1 & Figure 2).

2. Replace the battery cover (Figure 3).

3. Proceed to the “Testing Digital Lock” section on next page.

INSTALL BATTERIES

OVERRIDE ACCESS KEY

Your safe is equipped with an override access key which allows immediate access

in case you forget your user codes or the batteries need to be installed or replaced.

1. Remove override key cover with small screwdriver (Figure 1).

2. Insert the override access key into the lock until it stops (Figure 2).

3. With the key inserted turn counter clockwise to the left (Figure 3).

4. Turn knob clockwise to the right and pull safe door open (Figure 4).

5. Remove override access key and store it in a safe place away from the

safe. Replace the cover over the key lock and proceed to “Install Batteries”.

Figure 1

Figure 2

Figure 3

Figure 4

1. Push the safe door to the closed position and turn the knob counter clockwise to the left (Figure 1).

2. Enter the preset primary factory code “1 5 9” followed by “#” key into the keypad. If the correct code

is entered, the green LED will light up (Figure 2).

3. The knob can then be turned clockwise to the right to open (Figure 3).

NOTE: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will

re-lock and you must re-enter the code to open the safe.

4. To lock, close safe door and turn knob counter clockwise to the left (Figure 4).

PROGRAMMING NEW USER CODE

TESTING DIGITAL LOCK

Figure 1

Figure 2

Figure 3

Figure 4

Green LED

Green LED Yellow LED

Beep

1. Open door using the factory preset code of 159 followed by the “#” key (Figure 1).

2. Access the red reset button located on the inside of the door near the battery compartment.

Press the red reset button and the yellow LED will light up (Figure 2).

3. Enter a new 38 digit Primary user code followed by the “#” key. Press “*” to clear entry if wrong

digit is entered (Figure 3).

4. Safe will beep and yellow light will turn off (Figure 4).

5. You can now close and lock the safe door and your new User Code is now active.

NOTE: The factory pre-set code will not work after a new pass code is programmed.

Figure 4

SECURE LOCKOUT PERIOD

If a wrong code is entered three times in a row, the digital keypad will begin a ﬁve-minute secure lockout

period. During this secure lockout period the keypad will become disabled. Once the lockout period has

expired, the safe can be unlocked using the correct passcode. You may use the override key to open safe,

but keypad will complete the full lockout period.

LOST OR FORGOTTEN USER CODES

If the user code is lost or forgotten, you may open the safe using the Override Access key and use the

red reset button to reprogram the 38 digit user code. The instructions for opening the safe with the

override access key are located on page 2.

CARE AND MAINTENANCE

When properly maintained, your safe will continue to operate for many years. In order to ensure optimum

performance of your safe, please follow these simple precautions:

CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris or

liquids on them.

CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,

window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive

cleansers on the safe or digital keypad.

For future reference, store this Operation and Installation Guide in a secure area away from the safe.

DO NOT DISCARD!

TESTING NEW USER CODE

1. Push the safe door to the closed position and turn the knob counter clockwise to the left (Figure 1).

2. Enter the new User Code followed by “#” key into the keypad. If the correct code is entered, the

green LED will light up (Figure 2).

3. The knob can then be turned clockwise to the right to open (Figure 3).

NOTE: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will

re-lock and you must re-enter the code to open the safe.

4. To lock, close safe door and turn knob counter clockwise to the left (Figure 4).

Figure 1 Figure 2 Figure 3 Figure 4

Green LED

ANCHORING YOUR SAFE

Figure 1 Figure 2 Figure 3

You may bolt your safe to the wall or ﬂoor for added theft protection and resistance to tipping. Your

safe has pre-drilled bolt-down holes in the back panel and in the ﬂoor.

To secure your safe to the wall and/or ﬂoor:

1. Select a suitable and convenient location for your safe.

2. Empty the safe and remove the carpet.

3. Locate the predrilled holes on the inside of safe.

4. Place your safe in the desired location.

5. Line up the predrilled holes and mark the ﬂoor or wall through the holes (Figure 1).

NOTE: It is not recommended to attempt to bolt to both ﬂoor and wall.

6. Move the safe aside to clear marked spots for drilling.

7. Drill holes appropriate for hardware being used and the mounting surface (Figure 2).

INCLUDED: (2 each – bolts, washers and masonry anchors).

8. Place the safe back over the holes and install the fasteners as required (Figure 3).

9. Once completed, replace the carpet.

NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed

Products is not responsible for any costs incurred if the unit is to be replaced.

If you have any questions about mounting the safe, please check with your local home center/

hardware retailer or independent contractor.

EMAIL: LHLPCustomerSer[email protected]

WEBSITE:www.honeywellsafes.com

ADDRESS: Consumer Assistance Dept.

LH Licensed Products, Inc., 860 East Sandhill Avenue Carson, CA 90746 USA

TELEPHONE: US/Canada 18773545457 (Toll Free)

Mexico 018002882872 After English voice recording stops you must then enter

8008601677 to complete your call. (Toll Free)

Australia 001180053257000 (Toll Free)

Germany/New Zealand 0080053257000 (Toll Free)

Other Countries XX*3103235722 (Toll Charges Apply)

XX*- Dial U.S. Country Code ﬁrst

CALL CENTER HOURS: US/Canada 7am – 5pm (Paciﬁc**) Mon – Fri (Subject to change)

CALL BACK HOURS: Other Countries 7am – 8pm (Paciﬁc**) Mon – Fri (Subject to change)

Paciﬁc**- Local time in Los Angeles, CA, USA

* Insert correct Country Code

** Local Time based on Los Angeles California USA

INTERNATIONAL CALL BACK HOURS:

If you need to speak with a consumer assistant and cannot contact us during the Call

Center hours above, please send an email or leave a telephone message, including your Name,

Telephone Number and the best time for us to contact you during the Call Back hours above and

we will make every effort to contact you and help answer any of your questions or concerns.

CONSUMER ASSISTANCE

The following information is required to order keys:

1. PROOF OF OWNERSHIP (1 of 2 Options Below)

A) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY!

• Copy of sales receipt showing Store, Date & Product Description.

• Copy of your picture I.D. (Drivers license, passport, regular I.D.).

B) PRODUCT OWNERSHIP VERIFICATION FORM

If sales receipt is not available, contact us by email or telephone to request a “Product

Ownership Veriﬁcation Form”.

2. ORDER INFORMATION

CONTACT

• Name & Shipping Address

• E-mail address (If Available)

• Telephone Number

• Best Time to Contact You

3. PLACING AN ORDER

• To begin the order process, contact us by telephone, email, or mail

4. METHOD OF PAYMENT

• Visa, MasterCard, Check or Money Order

NOTE: For pricing please contact Consumer Assistance. Contact information is located on the back

cover of this manual. Payment method and pricing subject to change.

Model Number:

Serial Number:

Override Access Key Number:

User Code:

ORDERING ADDITIONAL OVERRIDE ACCESS KEYS

SAFE IDENTIFICATION RECORD

DIGITAL USER CODE RECORD

PRODUCT

• Model #

• Serial #

• Lock Key #

• Quantity of Keys Ordered

NOTES

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Honeywell Sûr

Honeywell

Honeywell 5912 Comment utiliser

Honeywell

Honeywell 5301DOJ Manuel utilisateur

Honeywell

Honeywell 5410 Comment utiliser

Honeywell

Honeywell 5912 Manuel utilisateur

Honeywell

Honeywell 6108 Manuel utilisateur

Honeywell

Honeywell 2074E Comment utiliser

Honeywell

Honeywell 5605 Manuel utilisateur

Honeywell

Honeywell 5005 Manuel utilisateur

Honeywell

Honeywell 2054D - 1 Hour Steel Fire Safe Comment utiliser

Honeywell

Honeywell 1101 Manuel utilisateur

Honeywell

Honeywell 1553 Manuel utilisateur

Honeywell

Honeywell 5005 Comment utiliser

Honeywell

Honeywell 1502 Manuel utilisateur

Honeywell

Honeywell 3035D Comment utiliser

Honeywell

Honeywell 2116 Manuel utilisateur

Honeywell

Honeywell 5103 Manuel utilisateur

Honeywell

Honeywell 5101 Manuel utilisateur

Honeywell

Honeywell 2605 Comment utiliser

Honeywell

Honeywell 2911 Manuel utilisateur

Honeywell

Honeywell 5911 Manuel utilisateur

Honeywell

Honeywell Media Protector 2040 Manuel utilisateur

Honeywell

Honeywell 5002 Manuel utilisateur

Honeywell

Honeywell 2111 Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Comment utiliser

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Phoenix

Phoenix FS1280F Manuel utilisateur

Phoenix

Phoenix SS0992K Fiche d'information produit

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi

Ankaro

Ankaro ANK EZ I Manuel utilisateur

Phoenix

Phoenix FS1270E Series Manuel utilisateur