Honeywell 2512 Manuel utilisateur
Read this manual carefully and never store it inside the safe!
User Guide
2 Hour Steel Fire Safes
with Programmable Digital Lock
Package Includes;
Models 2512, 2531,
2532 & 2534
ENGLISH
1 - 2 Hour Fire Safe with Digital Lock
1 - User Guide
2 - Entry Keys
2 - Override Access Keys
Please carefully check the above list to confirm all items have been received. If any items
are missing, please contact Consumer Assistance. (See page 11 for contact information).
DO NOT RETURN SAFE TO STORE
If you are missing parts or have difficulty operating your safe, please contact our
Consumer Assistance Department by telephone. Store will not accept returned
products without prior authorization. You must first contact our Consumer
Assistance Department (See page 11 for contact information).
Please go to the following webpage to register your product:
www.hymaninc.com/product-registration/
Safe Serial #
Located on the bottom right corner of the safe door frame (Figure 1.1).
Override Access Key #
Engraved on the Head of the key (Figure 1.2).
Entry Key #
Engraved on head of the key and the lock cylinder (Figures 1.3 & 1.4).
Safe Model #
Safe Serial #
Override Access Key #
Entry Key #
User Code
LOCATING SAFE IDENTIFICATION NUMBERS
PRODUCT REGISTRATION
SAFE IDENTIFICATION RECORD
Figure 1.1 Figure 1.2 Figure 1.3 Figure 1.4
LP0004 1375 0001 5101 EC0026 EC0026
EC0033
SAFE IDENTIFICATION RECORD ................................................... INSIDE COVER
LOCATING SAFE IDENTIFICATION NUMBERS ........................... INSIDE COVER
INDEX ..................................................................................................................... PAGE 1
WELCOME ............................................................................................................ PAGE 2
PROPER SAFE USE ............................................................................................ PAGE 2
CARE AND MAINTENANCE .............................................................................. PAGE 2
MOVING YOUR SAFE ......................................................................................... PAGE 3
PLACEMENT OF SAFE ...................................................................................... PAGE 3
INSTALL BATTERIES ......................................................................................... PAGE 4
REPLACE BATTERIES ........................................................................................ PAGE 4
SET CALENDAR AND CLOCK .......................................................................... PAGE 5
UNLOCK AND OPEN SAFE ............................................................................... PAGE 6
CLOSE AND LOCK SAFE ................................................................................... PAGE 6
PROGRAM NEW USER CODES ....................................................................... PAGE 7
OPEN SAFE WITH NEW USER CODES .......................................................... PAGE 7
PRIVACY MODE .................................................................................................... PAGE 8
INCORRECT CODE ENTRY ............................................................................... PAGE 8
SECURITY LOCKOUT PERIOD ......................................................................... PAGE 8
SECURITY ALARM .............................................................................................. PAGE 8
HISTORICAL ENTRY DATA RETRIEVAL ......................................................... PAGE 9
LOST ENTRY CODE ............................................................................................ PAGE 9
EMERGENCY ACCESS ....................................................................................... PAGE 10
CONSUMER ASSISTANCE ................................................................................ PAGE 11
ORDERING ADDITIONAL SAFE KEYS ........................................................... PAGE 12
LIMITED WARRANTY ................................................................................ BACK COVER
INDEX
PROPER SAFE USE
CARE AND MAINTENANCE
Your Honeywell Steel Fire Safe will provide years of safe and secure protection
for your valuables, important documents and other personal items. All
Honeywell safes are designed and built using the highest manufacturing
standards to ensure maximum user satisfaction under a variety of conditions.
With proper care, your Honeywell safe will provide “Peace of Mind” for many
years to come.
Thank you and enjoy!
WELCOME
Honeywell Steel Fire Safes are designed to protect important documents, digital
media files and other valuables from theft and tampering as well as damage
from the exposure to fire.
Theft Protection
A Programmable Digital Lock, Steel Locking Door Bolts and Insulated Steel
Double Walls.
Fire Protection
Independent testing verified the interior temperature remains below 350º F
(177ºC) when the exterior temperature is up to 1400º F (760ºC) for 2 hours.
Water Resistant Protection
Honeywell Steel Fire Safes are designed to protect the safe contents from any
water damage that could occur from incidental water spray from fire sprinklers
and hoses.
When properly maintained, your safe will continue to operate for many years. In
order to ensure optimum performance of your safe, please follow these simple
precautions:
Clean Hands
Never attempt to operate the digital keypad if your hands have excessive dirt,
debris or liquids on them.
Clean Safe
To clean the surface of your safe, it is recommended that you use a mild cleaner
(e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe
dry and NEVER use abrasive cleansers on the safe or digital keypad.
Moisture
We recommend that you place delicate items such as important documents
pictures or intricate jewelry into an air-tight container before storing them in
your safe. Avoid placing your safe in areas of high humidity.
2
MOVING YOUR SAFE
PLACEMENT OF SAFE
Before moving your safe, verify the load bearing weight of the floors and stairs,
and types of flooring the safe will be moved over (tile, wood, and other flooring
can be damaged by the weight of the safe).
Proper installation and anchoring are critical to the security of your safe. Install
near a load-bearing wall to support the weight of the safe. To help protect the
exterior finish of your safe, install inside in a dry location where there is climate
control (heat in the winter and cooling in the summer). This safe has been de-
signed to withstand a certain amount of heat during a fire. Generally speaking,
fire safes perform better in lower levels of a home (like the basement) where fire
temperatures are lower. Additionally, placement of your safe away from potential
hot spots (areas where flammable materials are stored) will improve your
chances that your safe and its contents will perform better in a home fire. No
safe is completely fireproof. If the fire reaches a high enough temperature for
long periods, fire damage will occur.
3
INSTALL BATTERIES
The batteries must be installed before using your safe.
If the batteries are removed or fail, the keypad memory will NOT be erased
and the active programmed code will still work once power has been restored.
REPLACE BATTERIES
Weak or dead batteries should be
replaced immediately and all 4
batteries should be changed. To replace
the batteries, please follow the
instructions in STEP 1. in the “INSTALL
BATTERIES” section. Remember to
always remove batteries from safe if not
using for an extended period of time. If
your batteries are completely dead and
you cannot open the safe by using the
digital keypad, use the override access
key to open safe.
NOTE: It is NOT RECOMMENDED to use
Non-alkaline or rechargeable batteries.
1. Remove the battery compartment
cover located on the right side of
the control panel by pushing in
and to the right.
2. Insert 4 “AA” batteries. Ensure the
batteries are installed in the
correct direction, with regard to
polarity (+ and -).
3. If the batteries are put in correctly,
the safe will beep and the LCD
readout will flash, then it will read
“GOOD”
4. Once the batteries are properly
installed, replace the battery
compartment cover.
1.
2.
3.
4.
4
SET CALENDAR AND CLOCK
Once batteries are installed and the control pad is powered, the next step is to
begin by programming the clock and calendar. READ ENTIRE DIRECTIONS
AND WRITE DOWN DATE/DAY/TIME BEFORE PROGRAMMING. NOTE: You
must enter all information without delays. If the light goes off, you must begin
programming again.
When correctly entered, the LCD readout
will stop glowing and should display the
information you just programmed.
1. With the safe door closed and locked,
press the “ ” key followed by the “9” key.
The LCD readout will glow amber.
2. Enter the Year – 2 Digits
3. Enter the Month – 2 Digits
4. Enter the Date – 2 Digits
5. Enter the Day – 1 Digit (see chart below)
6. Enter the Hour – 2 Digits (see chart below)
7. Enter the Minutes – 2 Digits
1.
2.
3.
4.
5.
6.
7.
2020 =
February =
30th
Monday
9:26 am
9:26 am
Example
DAY #
Monday 1
Tuesday 2
Wednesday 3
Thursday 4
Friday 5
Saturday 6
Sunday 7
Hour ##
1:00 am 01
2:00 am 02
3:00 am 03
4:00 am 04
5:00 am 05
6:00 am 06
7:00 am 07
8:00 am 08
Hour ##
9:00 am 09
10:00 am 10
11:00 am 11
12:00 pm 12
1:00 pm 13
2:00 pm 14
3:00 pm 15
4:00 pm 16
Hour ##
5:00 pm 17
6:00 pm 18
7:00 pm 19
8:00 pm 20
9:00 pm 21
10:00 pm 22
11:00 pm 23
12:00 am 00
5
UNLOCK AND OPEN SAFE
CLOSE AND LOCK SAFE
This safe is equipped with a dual digital/key lock system that requires
entering an active user code to unlock and an entry key to open. It
allows for two separate reprogrammable active user codes.
The preset factory user codes are “1 2 3 4” and “1 2 3 4 5 6”.
1. Begin by inserting the entry key
into the cylindrical key hole on the
left side of the control panel.
2. On the keypad enter the
“#” key, then the user code “1 2 3
4”, followed by “#” key again.
3. If correct code is entered, OPEN
will appear on the LCD panel, and
you’ll hear a chime tone indicating
the safe is unlocked.
4. Within 5 seconds, turn the key to
the left counterclockwise.
5. Within 5 seconds, turn the handle
upwards to the right (clockwise)
and pull the door open.
1.
2.
3.
4.
5.
6
Carefully close the door, turn the key
clockwise to the right and remove.
The safe is now locked and an active user
code will need to be re-entered to open.
PROGRAM NEW USER CODES
OPEN SAFE WITH NEW USER CODES
SECURITY NOTE: To insure privacy, this procedure should be repeated for both
of the factory pre-set codes
Repeat this process to reprogram the second factory pre-set code.
Your new code is now ready to use and the previous code is erased from
memory. If you wish to change your new code, simply repeat the process
with current active user code(s) and enter new code(s).
1. Unlock the safe with the first
factory pre-set (or current
active) code.
2. If correct code is entered, “OPEN”
will appear on the LCD panel, and
you will hear a chime tone
indicating the safe is unlocked.
3. Immediately enter “ ” then a new
48 digit code followed by the “#”
key. (if you use an 8-digit code,
you will not need to enter the “#”
key after.
4. If entered correctly, “IN” will appear
on blue display followed by a chime
and the new code number will
appear for 1 second.
1.
2.
3.
4.
7
Repeat the process described in STEP 3: UNLOCK AND OPEN SAFE,
substituting the new user code(s) for the factory preset user code(s)
8
INCORRECT CODE ENTRY
If an incorrect code is entered, the word
“ERROR” will appear on the digital readout
and an alert tone will sound. At this time,
re-enter the correct code.
SECURITY ALARM
This safe is equipped with a security alarm.
To activate alarm, press “0” with door closed.
Display will read “ALERTON”.
The alarm will sound whenever:
• Thewrongcodeisentered3ormoretimestogainentry
• Thesafeisshakenorexperiencesforcefulimpact.
To de-activate alarm or turn off alarm siren, enter an active user code.
Alarm should be reset after deactivating.
During the 1st minute, the siren sound
can be stopped if correct code is entered,
if no action or another three (3) incorrect
codes are entered during the 1st minute
the system will enter into lockout mode
(5 minutes). If another 3 incorrect codes
are entered after the first lockout period,
the siren will sound for 1 minute before
entering the 2nd phrase of 15-minute
lockout period.
During the lockout period, if battery is
removed the system will enter 15-minute
lockout period
SECURITY LOCKOUT PERIOD
If an incorrect code is entered, the word “ERROR” will appear on the digital
readout and an alert tone will sound. At this time, re-enter the correct code.
PRIVACY MODE
If you wish to prevent your personal code
from being read on the digital readout, it
can be hidden from view by inserting the
“ ” after “#”.
Example: “# 1 2 3 4 #”.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Honeywell Sûr
Honeywell
Honeywell 2072 - 1.00 Cubic Foot Anti-Theft Shelf Safe Comment utiliser
Honeywell
Honeywell 2510 Manuel utilisateur
Honeywell
Honeywell 2111 Manuel utilisateur
Honeywell
Honeywell 5005B Manuel utilisateur
Honeywell
Honeywell 2116 Manuel utilisateur
Honeywell
Honeywell 5911 Manuel utilisateur
Honeywell
Honeywell 3518 Manuel utilisateur
Honeywell
Honeywell 5601 Manuel utilisateur
Honeywell
Honeywell 2208 Manuel utilisateur
Honeywell
Honeywell 5410 Comment utiliser
Honeywell
Honeywell 3511 Manuel utilisateur
Honeywell
Honeywell 6108 Manuel utilisateur
Honeywell
Honeywell 2092D - Waterproof Fire Safe Comment utiliser
Honeywell
Honeywell 5203 Manuel utilisateur
Honeywell
Honeywell 5002 Manuel utilisateur
Honeywell
Honeywell 5103 Manuel utilisateur
Honeywell
Honeywell 1502 Manuel utilisateur
Honeywell
Honeywell 5005 Manuel utilisateur
Honeywell
Honeywell 5005 Comment utiliser
Honeywell
Honeywell 1101 Manuel utilisateur
Manuels Sûr populaires d'autres marques
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
Technomax
Technomax Trony Series Manuel
SPORTS AFIELD
SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur
