Honeywell IH25 Manuel utilisateur
IH25
Bluetooth® UHF RFID Reader
User Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the reader should in all cases
consult HII to determine whether any such changes have been made. The information in this
publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the furnishing, performance, or use of this
material. HII disclaims all responsibility for the selec- tion and use of software and/or hardware to
achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this doc- ument may be photocopied, reproduced, or translated into another
language without the prior written consent of HII.
Copyright © 2018 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
ePop-Loq®, TSL ASCII, and logos are registered trademarks owned by Technology Solutions (UK)
Ltd (TSL®.)
Other product names or marks mentioned in this document may be trademarks or registered
trademarks of other compa- nies and are the property of their respective owners.
For patent information, refer to www.hsmpats.com.
TABLE OF CONTENTS
Customer Support ...................................................................................................................................... 2
Technical Assistance................................................................................................................................. 2
Product Service and Repair .................................................................................................................... 2
Limited Warranty ........................................................................................................................................ 2
Send Feedback............................................................................................................................................. 2
1INTRODUCTION ......................................................................................................1
IH25 Features............................................................................................................................................... 1
Battery Installation..................................................................................................................................... 2
Charging......................................................................................................................................................... 3
Fitting / Unloading Device Case and Attaching Device.............................................................. 5
Reading RFID Tags..................................................................................................................................... 7
MODE Button and Status Indicators.................................................................................................. 8
2BccRFID MOBILE APPLICATION FOR ANDROID ............................................9
Overview.......................................................................................................................................................... 9
Using the BccRFID Mobile Application for Android .............................................................. 9
Basic Operation ........................................................................................................................................... 9
Home Screen ...................................................................................................................................... 10
Connect................................................................................................................................................. 10
Scan........................................................................................................................................................ 12
Edit Tag................................................................................................................................................. 13
Locate Tag ........................................................................................................................................... 15
Settings................................................................................................................................................. 18
About...................................................................................................................................................... 21
3MAITAINANCE AND TROUBLESHOOTING.................................................... 22
Maintenance.............................................................................................................................................. 22
Troubleshooting....................................................................................................................................... 22
Customer Support
Technical Assistance
To search our knowledge base for a solution or to log in to the Technical Support
portal and report a problem, go to www.hsmcontactsupport.com.
For our latest contact information, see www.honeywellaidc.com/locations.
Product Service and Repair
Honeywell International Inc. provides service for all of its products through service
centers throughout the world. To obtain warranty or non-warranty service, return
your product to Honeywell (postage paid) with a copy of the dated purchase
record. To learn more, go to www.honeywellaidc.com and select Service & Repair at
the bottom of the page.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Get Resources >
Product Warranty
Send Feedback
Your feedback is crucial to the continual improvement of our documentation. To
provide feedback about this manual, contact the Honeywell Technical Communi-
cations department at ACSHSMTechnicalCommunications@honeywell.com.
IH25 Bluetooth UHF RFID Reader
1
CHAPTER
1INTRODUCTION
The IH25 UHF RFID Reader provides Ultra High Frequency (UHF) Radio
Frequency Identification (RFID) connected to a mobile terminal. The unit can
read and write to bar code, QR code and UHF RFID tags.
IH25 Features
2
IH25 Bluetooth UHF RFID Reader
Battery Installation
The battery is charged using a docking station and therefore is unlikely to need to
be changed once installed.
Install the battery before using the reader for the first time.
1. To access the battery compartment, remove the battery cover screws and then
the battery cover.
2. Insert the battery into the battery compartment.
3. Attach the battery cover and tighten the screws. Note that the torque should
be 3.5kg.f.
IH25 Bluetooth UHF RFID Reader
3
Charging
To comply with international shipping regulations, the battery is discharged to
less than 30% of their maximum capacity. It is therefore recommended that
you fully charge the battery before using the reader for the first time.
To charge the reader, use the USB cable + AC charge adapter （Honeywell
recommended）or a docking station.
1. Attach the battery cover. Make sure that the cover clicks into place.
2. Attach the handle. Make sure that the handle clicks into place.
4
IH25 Bluetooth UHF RFID Reader
Docking Station Charge
Use the one slot or four-slot docking station to charge IH25 and the mobile terminal.
Note: when charging, make sure the charging indicator is always on.
IH25 Bluetooth UHF RFID Reader
5
Fitting / Unloading Device Case and Attaching
Device
1.
Insert the mobile terminal into the bracket and press it down.
Note: When installing the bracket, pay attention to the angle and strength so as
not to damage the product.
2.
Check the bracket on the bottom of the bracket and the socket on the reader are
clean and free from dirt or debris.
3.
Align the bracket with the socket, ensuring that it is parallel, and press the two
parts together firmly until they click into place.
6
IH25 Bluetooth UHF RFID Reader
4.
Unload the mobile terminal: place the IH25 on the table or hold it at the sides with
both hands, push the buckle out with your thumbs, and lift the terminal out with
your index finger.
5.
Unload the bracket: hold the handle with one hand and lift it from the side of the
bracket with the other hand.
Autres manuels pour IH25
2
Table des matières
Autres manuels Honeywell Système RFID
Honeywell
Honeywell IH25 Manuel utilisateur
Honeywell
Honeywell 026366.00 Manuel utilisateur
Honeywell
Honeywell ARC-X Manuel utilisateur
Honeywell
Honeywell IF1C Manuel utilisateur
Honeywell
Honeywell Home SPR-S8EZS Manuel utilisateur
Honeywell
Honeywell IH40 Manuel utilisateur
Honeywell
Honeywell IH45 Manuel utilisateur
Honeywell
Honeywell IH25 Manuel utilisateur
Honeywell
Honeywell Connected Home SPR-S8EZS Manuel utilisateur
Honeywell
Honeywell IM11-PRT Manuel utilisateur
