Honeywell HRDE4X4 Manuel utilisateur

Document 900.0573 – 02/06 – Rev 1.00

HRDE4X4 Quick Installation Guide

1 Easy Video / Audio Connections — Set Composite / VGA Monitor and

Start Recording

2 View Live Cameras, Listen to Live Audio and Record Indicator Status

3 Access Programming Menus — Set the Date and Time

VIDEO IN

CH1 CH2

CH3 CH4

AUDIO IN

CH1 CH2 CH3 CH4

AUDIO OUTALARMSENSOR

RS-422/485

ETHERNET

RS-232

VIDEO OUT VGA DC 12V

CAUTION

WARNING

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OP EN

TO REDUCETHE RISK OF FIRE OR ELECTRIC

SHOCK DO NOT EXPOSETHIS APPLIANCETO

RAIN OR MO ISTURE

TO REDUCETHE RISK OF EL ECTR IC SHOCK

NO USER SERVICEABLEPART S I N S ID E. REF ER

SERVICINGTO QUALI FIED SERVICE PERSONNEL

TX+ TX- RX+ RX-

1GGGGOUT234

!Connect the supplied 12 VDC power adapter to the unit, connect the AC 100 – 240 VAC 50/60 Hz adapter.

"Connect cameras to Video IN BNC connectors.

#Connect audio to Audio IN RCA connectors (use an amplified microphone).

$Connect a monitor to the Video Out or VGA connector:

A monitor can be VGA (PC Monitor) or Composite (but not both at the same time). Unit is factory set for composite.

Set switch 2 down to ON and power reset the unit to change to VGA (composite stops working).

The HRDE4X4 is factory set to continuously record an estimated 21 days in a loop at 1 image per second, per

camera, with quad resolution and high image quality. On power up, if factory set and cameras are connected, the

unit begins recording automatically.

Press arrow

key 1 – 4to

select/display

one camera

C = Continuous recording in progress, Record Menu

R = Manual recording overide in progress (1 IPS)

M = Motion recording in progress

S = Sensor recording in progress (alarm input)

Press SEL to

display quad

(4) cameras

Press SEQ in

single view to

automatically

rotate through

each camera

view. Press SEQ

again to stop.

For additional operations, see the HRDE4X4

Front Panel Operator Guide or User Guide

included with the unit.

Audio from the selected camera will be heard.

Audio must be enabled in the Record menu. An

amplified speaker must be connected to the

Audio Out connection on the back of the unit.

To log on, press ➤1111 ➤

Use arrow keys to highlight as required

Set the date and time in the System menu

Video Systems

www.honeywellvideo.com

+1.800.796.CCTV (North America only)

4 Program Record Menu — Use Estimator on CD for Days to Record

5 Program Network Menu, Install Client Viewer on Windows® XP Pro / 2000

6 Save Parameters, See Manual or Website for More Info / Tech Support

Option Recordingschedules.

Highlight channel 1 – 4and a

time slot. Press SEL and

toggle through the choices:

C = Continuous

M = Motion

S = Sensor (Input Alarm)

_ _ = No recording

Estimator.EXE on the CD

estimates continuous days

of recording. This duration

can also be increased

using scheduled or motion

recording.

Enter

parameters in

the Record

Enable audio if live monitoring

or recording requires audio

Option Partial motion zone.

Allows areas of a camera to

be set to detect motion. Pink

squares = detect motion.

Use arrows and press SEL

to toggle squares pink.

Install the Honeywell

Client Viewer included on

the CD onto a PC using

Windows XP Pro/2000.

Enter Network information

in the Network menu.

Double-click on

the viewer icon Click

Connect

Enter:

IP address (from Network menu)

Port 5445

Factory password (1111)

When exiting the programming menus, ensure you select Confirm in the Save Setup screen.

For additional details, see the HRDE4X4 User Guide included with the unit.

For additional technical information or software updates, see the Honeywell Video website at:

http://www.honeywellvideo.com/products/dvs/dvr/52917.html

For Technical Support questions in North America call 1.800.796.CCTV.

See the website for international phone numbers.

Autres manuels pour HRDE4X4

Table des matières

Autres manuels Honeywell DVR

Honeywell

Honeywell HRHD4+ Manuel utilisateur

Honeywell

Honeywell hus-nvr-1032-e Manuel utilisateur

Honeywell

Honeywell HRHM1041 Manuel utilisateur

Honeywell

Honeywell FUSION III DVR Manuel utilisateur

Honeywell

Honeywell HRHD4+ Manuel utilisateur

Honeywell

Honeywell HREP24 Manuel utilisateur

Honeywell

Honeywell MAXPRO NVR XE Manuel utilisateur

Honeywell

Honeywell CADVR-1004-WD-M Manuel utilisateur

Honeywell

Honeywell HNDR series Manuel utilisateur

Honeywell

Honeywell CADVR-1004-WD-M Manuel utilisateur

Honeywell

Honeywell HRDV 16 Duplex Instructions d'utilisation d'origine

Honeywell

Honeywell H.264 HRDP Manuel utilisateur

Honeywell

Honeywell 35 Series Manuel utilisateur

Honeywell

Honeywell HRDP16D1T0 Manuel utilisateur

Honeywell

Honeywell HRTL-One Manuel utilisateur

Honeywell

Honeywell HD-DVR-1004 Manuel utilisateur

Honeywell

Honeywell HRTL-One DVR Manuel utilisateur

Honeywell

Honeywell Rapid Eye Manuel

Honeywell

Honeywell MAXPRO NVR Series Manuel utilisateur

Honeywell

Honeywell HUS-NVR-1032/6032-E Manuel utilisateur

Honeywell

Honeywell HRDP4F250 Manuel utilisateur

Honeywell

Honeywell HRG series Manuel utilisateur

Honeywell

Honeywell VPR100 Manuel utilisateur

Honeywell

Honeywell HNDR-S 4848 Mode d’emploi

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur