Honeywell Thor VM1A Manuel utilisateur

Thor™ VM1A

Vehicle-Mount Computer

Quick Start Guide

VM1A-A8-EN-QS Rev A

10/18

Out of the Box

Make sure your shipping box contains these items:

• Thor VM1A vehicle-mounted computer (Model VM1A-L0N)

• Regulatory Sheet

If you ordered additional accessories for your computer, verify

that they are also included with the order. Be sure to keep the

original packaging in case you need to return the computer for

service.

Computer Features

Power

Button

Orange

Key LED

System

LEDs

Microphone

Speakers

Blue Key

LED

Blue Key

Ambient

Light

Sensor

Connection

LEDs

Touch

Panel

Orange

Key

Shift/Caps

Lock LED

Ctrl LED

Alt LED

Stylus

Wi-Fi

(MAIN)

SD Card

Access

Panel Dock

Contact

Pads

Provision for

Laptop Security

Cable

Provision for

Padlock

Quick Release

Handle

UPS

Disconnect

Button

Access

Panel

Wi-Fi

(AUX)

Dock Features

Dock Contact

Pads

Strain Relief Clamps

Power

Connector

COM 2

COM 1

RAM Ball

Fuse

Power

Switch

Audio

USB

Standard Dock

Accessory

Mount

Power

Switch

COM 2

Ethernet

USB 2

USB 1

Accessory

Mount

COM 1

Audio

Fuse

Power

Connector Dock USB Client Port

Enhanced Dock

Strain Relief Clamps

RAM Ball RAM Clamp RAM Plate

Mount to Vehicle

The Thor VM1A should be secured to an area in the vehicle

where it:

• Does not obstruct the driver's vision or safe vehicle operation.

• Will be protected from rain or inclement weather.

• Will be protected from extremely high concentrations of dust

or wind-blown debris.

• Can be easily accessed by a user seated in the driver's seat

while the vehicle is not in operation.

To mount the VM1A using a RAM mount system:

1. Attach RAM base to vehicle (RAM ball, RAM Clamp, RAM

Plate, etc.).

2. Attach RAM ball to the Smart Dock.

3. Attach VM1A assembly to RAM base using RAM arm and

tighten knob on RAM arm.

For more mounting details, refer to the user guide available at

www.honeywellaidc.com.

Connecting the Power Cable for 12-48 VDC Vehicles

(10-60 VDC Direct Connection)

Note: Refer to the Thor VM1A User Guide for other power

connections, available at www.honeywellaidc.com.

Caution: For installation by trained service

personnel only.

Warning: Fuse Requirements

For proper and safe installation, the input power cable

must be connected to a fused circuit on the vehicle. If

the supply connection is made directly to the battery,

the fuse should be installed in the positive lead within 5

inches of the battery’s positive (+) terminal. The fused

circuit requires a maximum time delay (slow blow) fuse

with a current rating as noted below.

• For 12VDC input, use a 10A slow blow fuse that has a

DC voltage rating greater than 12VDC.

• For 24VDC input, use a 6A slow blow fuse that has a

DC voltage rating greater than 24VDC.

• For 36VDC input, use a 4A slow blow fuse that has a

DC voltage rating greater than 36VDC.

• For 48VDC input, use a 3A slow blow fuse that has a

DC voltage rating greater than 48VDC.

Note: For North America, a UL Listed fuse must be used.

Power Cable Routing

Power Cable Wiring Diagram with Right Angle and 6 Wires

Twist the red and red/white wires together and twist the black

and black/white wires together before connecting to vehicle

power.

Connect the green wire to vehicle ground:

Caution: For battery powered vehicles, the green

wire must be connected to the vehicle

chassis ground.

Caution: For internal combustion engine powered

vehicles, the green wire is connected to the

vehicle chassis ground, which can also be

battery negative.

Wire Color Connection

Red DC + (10-60 VDC)

Red/White DC + (10-60 VDC)

Black DC -

Black/White DC -

Green Ground

Blue Ignition Sense Input (optional)

Refer to the Thor VM1A User Guide,

available at www.honeywellaidc.com, for

further information about ignition

control.

Autres manuels pour Thor VM1A

Table des matières

Autres manuels Honeywell Ordinateur de bureau

Honeywell

Honeywell Z4 G4 Manuel technique

Honeywell

Honeywell R5500 Manuel technique

Honeywell

Honeywell Viewer-Pro-Kit Manuel utilisateur

Honeywell

Honeywell T5810XL Manuel technique

Honeywell

Honeywell X-Superteam XPS-100 Guide de l'utilisateur

Honeywell

Honeywell CN75 Manuel utilisateur

Honeywell

Honeywell DPS 6 PLUS Mode d’emploi

Honeywell

Honeywell DPS 8 Guide de l'utilisateur

Honeywell

Honeywell 200 Series Manuel utilisateur

Honeywell

Honeywell CV31A Manuel utilisateur

Honeywell

Honeywell VX6 Manuel utilisateur

Honeywell

Honeywell 400 Series Manuel utilisateur

Honeywell

Honeywell LEVEL 6 Manuel utilisateur

Honeywell

Honeywell Thor VX8 Manuel utilisateur

Honeywell

Honeywell Thor VM3 Manuel utilisateur

Honeywell

Honeywell THOR VM1 Manuel utilisateur

Honeywell

Honeywell Fusion4 MSC-L Manuel utilisateur

Honeywell

Honeywell enCore FC1 Manuel utilisateur

Honeywell

Honeywell Thor VX9 Manuel utilisateur

Honeywell

Honeywell Thor CV31 Manuel utilisateur

Honeywell

Honeywell CN75e NI Manuel utilisateur

Honeywell

Honeywell CT45 Series Manuel utilisateur

Honeywell

Honeywell Esser 8010 Manuel utilisateur

Honeywell

Honeywell HercuLink HercuLine 2000 Series Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur