Honeywell 2020 Manuel utilisateur

™

2020

Cordless Base Accessory

User’s Guide

Draft 5/30/08

Disclaimer

Honeywell International Inc. (“Honeywell”) reserves the right to make changes

in specifications and other information contained in this document without prior

notice, and the reader should in all cases consult Honeywell to determine

whether any such changes have been made. The information in this publication

does not represent a commitment on the part of Honeywell.

Honeywell shall not be liable for technical or editorial errors or omissions con-

tained herein; nor for incidental or consequential damages resulting from the

furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied, repro-

duced, or translated into another language without the prior written consent of

Honeywell.

Other product names or marks mentioned in this document may be trademarks

or registered trademarks of other companies and are the property of their

respective owners.

Web Address: www.honeywell.com/aidc

Note: For additional information and programming instructions related to the

imagers, refer to the user’s manual for the specific scanner model.

Product Agency Compliance

USA

FCC Part 15 Subpart C

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Caution: Any changes or modifications made to this equipment not

expressly approved by Honeywell may void the FCC

authorization to operate this equipment.

UL Statement

UL listed: UL60950-1 for I.T.E product safety.

Canada

Industry Canada

This device complies with Canadian RSS-210.

Operation is subject to the following conditions:

1. This device may not cause interferenc, and

2. This device must accept any interference, including interference that may

cause undesired operation of this device.

Conformité à la règlementation canadienne

Cet appareil ISM est conforme à la norme CNR-210 du Canada.

Son fonctionnement est assujetti aux conditions suivantes :

1. Cet appareil ne doit pas causer de brouillage préjudiciable.

2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le

brouillage pouvant causer un fonctionnement indésirable.

cUL Statement

cUL listed: CSA C22.2 No.60950-1-03 for I.T.E product safety.

Europe

The CE mark on the product indicates that this device is in conformity

with all essential requirements of the 1999/5/EC R&TTE Directive. In

addition, complies to 2006/95/EC Low Voltage Directive, when shipped

with recommended power supply. For further information please

contact:

Honeywell Imaging & Mobility Europe BV

International Inc.

Nijverheidsweg 9-13

5627 BT Eindhoven

The Netherlands

Honeywell shall not be liable for use of our product with equipment (i.e.,

power supplies, personal computers, etc.) that is not CE marked and does

not comply with the Low Voltage Directive. This equipment is intended for

use throughout the European Community and has been assessed to the

following standards:

EN 300 328

EN 301 489-1

EN 301 489-17

EN60950-1

Waste Electrical and Electronic Equipment Information

Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN

PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic

equipment (WEEE).

This product has required the extraction and use of natural resources for its

production. It may contain hazardous substances that could impact health

and the environment, if not properly disposed.

In order to avoid the dissemination of those substances in our environment

and to diminish the pressure on the natural resources, we encourage you to

use the appropriate take-back systems for product disposal. Those systems

will reuse or recycle most of the materials of the product you are disposing in

a sound way.

The crossed out wheeled bin symbol informs you that the product

should not be disposed of along with municipal waste and invites you to use

the appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse, and recycling systems,

please contact your local or regional waste administration.

You may also contact your supplier for more information on the

environmental performances of this product.

Germany

If your product is marked with the GS symbol, then the product has

been issued a GS certificate showing compliance to IEC 60950-1.

Australia/NZ

C-Tick Statement

Conforms to AS/NZS 3548 EMC requirements.

Japan (2020-5B)

Complies with Technical Regulations Conformity Certification of Specified Radio

equipment.

Mexico

Safety approval conforms to NOM-019.

Comision Federal de Telecomunicaciones (radio aprobación)

International

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. The battery should be disposed of by a qualified

recycler or hazardous materials handler. Do not incinerate the battery or

dispose of the battery with general waste materials.

Radio Technology

Class II

CB Scheme

Certified to CB Scheme IEC 60950-1.

Patents

Please refer to product packaging for patent information.

Required Safety Labels

Scanner

Compliance

Label

locations

Item Number,

Serial

Number and

Revision

Information

location

Base

Compliance

Label

locations

Item Number,

Serial

Number and

Revision

Information

location

Chapter 1 - Getting Started

About This Manual .......................................................1-1

Unpacking the System .................................................1-1

Models .........................................................................1-1

Cordless System: Main Components...........................1-2

About the Battery .........................................................1-2

Proper Disposal of the Battery .....................................1-3

Connecting the Base....................................................1-3

Connecting the Base with USB..............................1-4

Connecting the Base with Keyboard Wedge..........1-4

Connecting the Base with RS-232 Serial Port .......1-6

Connecting the Base with RS-232 Wedge.............1-6

Linking Image Scanner to Base ...................................1-8

Communication Between the Cordless System

and the Host ..............................................................1-8

Chapter 2 - Programming the Interface

Introduction ..................................................................2-1

Programming the Interface - Plug and Play .................2-1

Keyboard Wedge Connection ......................................2-1

Laptop Direct Connect ...........................................2-1

RS-232...................................................................2-2

Wand Emulation Plug & Play .................................2-2

IBM 4683 Ports 5B, 9B, and 17 Interface ....................2-3

IBM SurePos ...............................................................2-4

USB PC or Macintosh Keyboard............................2-5

USB HID.................................................................2-5

USB Com Port Emulation.......................................2-6

Serial Wedge ...............................................................2-7

Programming the Interface - Terminal ID Method .......2-7

Supported Terminals....................................................2-8

Keyboard Country ......................................................2-10

Keyboard Style...........................................................2-12

Table of Contents

Keyboard Modifiers.................................................... 2-13

RS-232 Baud Rate............................................... 2-16

RS-232 Word Length: Data Bits, Stop Bits, and Parity

2-17

RS-232 Receiver Time-Out .................................2-18

RS-232 Handshaking........................................... 2-18

Host ACK Selection .............................................2-19

Host ACK Enable.................................................2-20

Wand Emulation .......................................................2-22

Wand Emulation Connection ...............................2-22

Wand Emulation Data Block Size ........................2-22

Wand Emulation Delay Between Blocks.............. 2-23

Wand Emulation Overall Checksum ....................2-23

Wand Emulation Transmission Rate ...................2-24

Wand Emulation Polarity .....................................2-24

Wand Emulation Idle............................................ 2-25

Chapter 3 - Basic System Operation

Cordless Base .............................................................3-1

RF (Radio Frequency) Module Operation.................... 3-1

Cordless Image Scanner .............................................3-1

System Conditions....................................................... 3-2

Linking Process ..................................................... 3-2

Image Scanner Is Out of Range ............................3-2

Image Scanner Is Moved Back Into Range ........... 3-2

Out of Range and Back into Range with

Data Accumulation Mode On ........................... 3-2

Base Charge Mode ..................................................... 3-3

Beeper and LED Sequences and Meaning .................3-4

Image Scanner LED Sequences and Meaning...... 3-4

2020 LED Sequences and Meaning ......................3-4

Image Scanner Modes................................................. 3-5

Unlinking the Image Scanner................................. 3-5

Autres manuels pour 2020

Table des matières

Autres manuels Honeywell Accessoires

Honeywell

Honeywell IS216T Manuel utilisateur

Honeywell

Honeywell SiXCT Manuel utilisateur

Honeywell

Honeywell 5800PIR-RES Manuel utilisateur

Honeywell

Honeywell RCW25 Manuel utilisateur

Honeywell

Honeywell C7110C1001 Manuel utilisateur

Honeywell

Honeywell Lyric RF6GB Manuel utilisateur

Honeywell

Honeywell 5000TC Series Manuel utilisateur

Honeywell

Honeywell R7184A Manuel utilisateur

Honeywell

Honeywell DUAL TEC DT8M Wireless Manuel utilisateur

Honeywell

Honeywell SC1000 Manuel utilisateur

Honeywell

Honeywell RDWL515A2000 Mode d'emploi

Honeywell

Honeywell C7189R01 Manuel utilisateur

Honeywell

Honeywell DT7550UK2 DUAL TEC Manuel utilisateur

Honeywell

Honeywell Home DO8EZS Manuel utilisateur

Honeywell

Honeywell DT8050M Manuel utilisateur

Honeywell

Honeywell C7232A Manuel d'utilisation

Honeywell

Honeywell PEHA 940 RS Manuel utilisateur

Honeywell

Honeywell Notifier NFSTI-SMT2 Manuel utilisateur

Honeywell

Honeywell P7640A Manuel utilisateur

Honeywell

Honeywell DUAL TEC DT8016MF5 Manuel utilisateur

Honeywell

Honeywell 5898 Manuel utilisateur

Honeywell

Honeywell WSK-HEAT-ROR Manuel utilisateur

Honeywell

Honeywell RPWL301A Manuel utilisateur

Honeywell

Honeywell 2450Cm Series Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur