Hommie S3 Manuel utilisateur
1
Thanks for choosing this product. Please read this [user
manual] carefully before use and keep this instruction
for future reference. Any problem about this product,
please feel free to contact us at
hommie[email protected].
Proper Wear & Kindly Reminder
1. Generally wear at 1-2 finger width from wrist join.
Sensor for accurate heart rate monitoring result, so
the smart watch should be close to skin, but don’t
wear it too tight, or it will affect the blood circulation.
For the accurate monitoring data, does not shake the
watch.
2. With the functions of water resistance, sweat proof,
rain proof, it can be used directly in daily washing,
shower (cold water) and other daily environments.
3. Do not use in bath, sauna, hot spring or other hot
environments with hot water and steam, which will
lead to product failure.
4. Do not wear the watch to dive for over 30 minutes in
the water depth of 1.5 meters or more.
5. This user manual takes iPhone 7 as an example to
introduce the App, so some features may differ from
Android phones.
6. Bluetooth Compatibility：
✔iOS9.0+/Android4.4+Smartphones with Bluetooth
4.0 +;
✖Tablet/HuaweiP8/SamsungS7&S8&J3/LG/Window
2
s/ PC/Phone/Tablet computer/iPad
Product Overview
Touch Button: Short press it to switch interface; Long
press it to access to its submenu.
Charging Watch
⦿How to Charge
1. Attach the equipped magnetic charger to the metal
contact on the back of the watch, and insert the
other end of the charger into USB wall charger or
USB interface of computer.
2. Screen displays in charging state.
⦿Charge under the Following Circumstances
1. Use at the first time;
2. Low battery and power off automatically.
Fitness Tracker-Main Menu
⦿Introduction of Main functions
On the main interface, short press the touch button in
turns to cycle through these interfaces (Main Interface>
1. Touch Screen
2. Touch Button
3. Charging contact
4. Heart Rate Sensor
3
Pedometer> Heart Rate> Sleep> Weather> Message>
Stopwatch> Sport)
1. Main Interface
Long press the button to access its submenu, a relative
list will show: Dial, Reset, Info, Bright, Off.
1) Dial: Long press the button to access dial selection;
Short press it in turns to switch dials. Long press it
again to confirm your selection and exit.
2) Bright: Long press the button to access brightness
adjustment; short press in turns to switch levels. Just
long press it again to confirm the level and exit.
3) Find Phone: Only connecting App successfully, this
function can be available.
4) Reset: If App can’t search for the watch, please reset
the watch.
2. Pedometer
24-hour real-time step counting by default,
record your steps for the whole day according
to your arm swings while you are walking.
More details can be viewed after after syncing
the App.
4
3. Heart Rate Monitor
In Heart Rate interface, the watch will
automatically monitor your heart rate for
about 60s. The LED indicator of sensor flashes
green when detecting.
In addition, you can turn on/off Automatic and
Maximum heart rate reminder 180 in App.
(Device--Heart Rate Settings). After that, the watch will
automatically start to continuously monitor your heart
rate every 1 minutes, and synchronize the data to App.
Note:
1) Monitoring your heart rate in watch, the endurance
of the watch will decrease.
2) Although this product is used to dynamically detect
heart rate in real time, please keep your body
inactive or stilly sit while detecting heart rate. Or the
time for heart rate monitor will be prolonged or no
data can be measured. After the watch had gotten
the measuring data, you can view the real-time
dynamic heart rate data and start moving. If there is
a big difference in the measured data, please take a
break to re-measure. The average value obtained
after 5 consecutive measurements will be more
accurate.
3) This product is a real-time dynamic heart rate
measurement, so the heart rate will be different
when talking, eating, drinking, etc. The monitoring
value may be closer to your actual situation when
5
you are peaceful.
4. Sleep Monitor
Get the total sleeping time of each night.
Record your sleep from 21:00 pm to 9:00 am.
Exits sleep monitoring mode after generating
the data. The data will be sync to the "Sleep" in
App through manually pulling down the the
"Home" page of App.
5. Weather
After connecting the smart watch and the App,
the App should be allowed to access into GPS
& Internet of the smart phone. Only then can
the smart phone automatically sync the
weather of that day to the App.
Kindly remind: Only connecting the App
"SmartWristband 3" successfully can you synchronize
watch's date & time, set message & call notification,
continuous HR monitoring, remote shot, and get your
specific data of heart rate, sleep and others.
App Download
⦿2 Ways to Download App
1. Download and
install the App
"SmartWristband 3" by
search in "App store" on iPhones or in "Google play" on
Android phones.
6
2. Download and install the App by scanning QR Code in
the manual.
Note: Mobile phone must support Android 4.4+ or iOS
9.0+ and Bluetooth 4.0+.
Binding
⦿Tips for First Pairing & Connecting
1. Please ensure that the Bluetooth and GPS of your
phone have turned on before access to the App.
2. After turning on App, register an account and enter
your personal information according to the prompt.
(Note: In order to make sure the normal connection
and use of the watch, please allow these requests
about receiving message, call and so on. Please make
sure that your Android phone have agreed that
SmartWristband 3 can access to the applications on
phone.)
3. Please make sure the watch's battery with enough
power and the connecting distance within 80cm.
4. When the watch and App are first paired and
connected, the time, date, steps and calorie symbols
of the watch will be synchronized to mobile phone. If
they disconnect for a long time, the data of time can
not update. It needs to bind App once again to
update the data.
⦿How to Connect (Device--Add a new device--Select
device--Click “S3”)
Table des matières
Langues :
